针对信号共振稀疏分解(RBSSD)方法中因字典单一导致其在处理低信噪比信号时存在分解不完全,以及因参数繁多选取困难而使其在实际工程中存在应用局限的问题,提出了多字典-共振稀疏分解(MD-RBSSD)方法。该方法在RBSSD调Q字典的基础上添加了Symlet8字典和正弦字典,通过对RBSSD分解后的低共振分量进行再次分离来实现对故障脉冲的增强提取。同时,引入相关峭度指标对提取结果进行量化评价,以验证分解结果的可靠性。算法仿真、实验分析和工程实例结果均表明,与传统RBSSD方法相比,所提出的MD-RBSSD方法能够更加准确有效地提取故障冲击成分,降低了RBSSD参数选择的难度,从而增加了RBSSD方法在工程领域的适用性。
RBSSD method often suffered from incomplete decompositions when dealing with low signal-to-ratio signals due to the single dictionary property, and has some limitations especially in practical applications due to the difficulty in parameter selection. To address this issue, a new multi-dictionary RBSSD (MD-RBSSD) method was proposed herein. Instead of using single dictionary, the proposed MD-RBSSD method introduced symlet8 wavelet dictionary and sine dictionary on the basis of the tunable-Q dictionary used in RBSSD. Thus, the low-resonance components obtained using RBSSD is further decomposed to extract fault impulse signatures. Furthermore, the correlated kurtosis was introduced to provide a quantitative evaluation for the decomposition results. Simulations, experiments and engineering case study were used to verify the effectiveness of the proposed method. The results show that compared with the traditional RBSSD method, the proposed MD-RBSSD method may extract fault impulse components more accurately and efficiently, reduce the parameter selection difficulty of RBSSD, and improve the applicability of RBSSD in engineering applications.
[1] 褚福磊. 机械故障诊断中的现代信号处理方法[M].北京:科学出版社, 2009:165-170. CHU Fulei. Mechanical Fault Diagnosis of Modern Signal Processing Methods[M].Beijing:Science Press, 2009:165-170.
[2] 李继猛, 张云刚, 张金凤,等. 基于自适应随机共振的齿轮微弱冲击故障信号增强提取方法研究[J].计量学报, 2017, 38(5):602-606. LI Jimeng,ZHANG Yungang,ZHANG Jinfeng,et al. Fault Diagnosis of Gears Based on Adaptive Stochastic Resonance and Sparse code Shrinkage Algorithm[J]. Acta Metrologica Sinica, 2017, 38(5):602-606.
[3] 陈世平, 王振忠, 俞辉,等. 改进小波包多阈值去噪法及其工程应用[J].中国机械工程, 2017, 28(20):2414-2419. CHEN Shiping,WANG Zhenzhong,YU Hui,et al. Improved Wavelet Packet Multi Threshold Denoising Method and Its Engineering Applications[J].China Mechanical Engineering, 2017, 28(20):2414-2419.
[4] WU Lijun, CHEN Xiaogang, PENG Yi, et al. Fault Detection and Diagnosis Based on Sparse Representation Classification (SRC)[C]//IEEE International Conference on Robotics and Biomimetics. Guangzhou, 2013:926-931.
[5] 江国乾, 谢平, 王霄, 等. 基于排序模式相异性分析的轴承健康监测[J]. 中国机械工程, 2017, 28(6):714-720. JIANG Guoqian, XIE Ping, WANG Xiao, et al. Bearing Health Monitoring Based on Ordinal Pattern Dissimilarity Analysis[J].China Mechanical Engineering,2017, 28(6):714-720.
[6] 张文义, 于德介, 陈向民. 基于信号共振稀疏分解与能量算子解调的轴承故障诊断方法[J]. 中国电机工程学报, 2013, 33(20):111-118. ZHANG Wenyi, YU Dejie, CHEN Xiangmin. Fault Diagnosis of Rolling Bearings Based on Resonance-based Sparse Signal Decomposition and Energy Operator Demodulating[J]. Proceedings of the CSEE, 2013, 33(20):111-118.
[7] 贺王鹏,訾艳阳,陈彬强.冲击特征受控极小化通用稀疏表示及其在机械故障诊断中的应用[J].西安交通大学学报,2016,50(4):94-99. HE Wangpeng, ZI Yanyang, CHEN Binqiang. Majorization Minimization Oriented Sparse Optimization Method for Feature Extraction Technique in Machinery Fault Diagnosis[J].Journal of Xi'an Jiaotong University, 2016,50(4):94-99.
[8] SELESNICK I W. Resonance-based Signal Decomposition:a New Sparsity-enabled Signal Analysis Method[J]. Signal Processing, 2011, 91(12):2793-2809.
[9] 陈向民, 于德介, 罗洁思. 基于信号共振稀疏分解的转子早期碰摩故障诊断方法[J].中国机械工程, 2013, 24(1):35-41. CHEN Xiangmin, YU Diejie, LUO Jiesi. Early Rub-impact Diagnosis of Rotors by Using Resonance-based Sparse Signal Decomposition[J]. China Mechanical Engineering, 2013, 24(1):35-41.
[10] 李星, 于德介, 张顶成. 基于最优品质因子信号共振稀疏分解的滚动轴承故障诊断[J]. 振动工程学报, 2015, 28(6):998-1005. LI Xing, YU Dejie, ZHANG Dingcheng. Fault Diagnosis of Rolling Bearings Based on the Resonance-based Sparse Signal Decomposition with Optimal Q-Factor[J]. Journal of Vibration Engineering,2015,28(6):998-1005.
[11] MCDONALD G L, ZHAO Q, ZUO M J. Maximum Correlated Kurtosis Deconvolution and Application on Gear Tooth Chip Fault Detection[J]. Mechanical Systems & Signal Processing, 2012, 33(1):237-255.
[12] SELESNICKI W. Wavelet Transform with Tunable Q-factor[J]. IEEE Transactions on Signal Processing, 2011, 59(8):3560-3575.