针对高级驾驶员辅助系统(ADAS)功能多、集成度低的情况,提出了将可逆预紧式安全带与车道偏离预警系统、前方碰撞预警系统和疲劳驾驶监测系统集成为一体的集成式主被动安全系统。在探讨了该集成系统的工作原理和控制策略基础上,通过开展志愿者实车道路实验研究了前方预警系统的碰撞时间阈值、安全带预紧力以及安全带预紧时产生的噪声三个因素对乘员主观感受的影响。对志愿者的主观评价和实验数据的对比分析表明:该集成系统的控制策略逻辑合理,在各个工况下能够主动触发以提醒和约束乘员;但是初期由于预警提醒的频次过高和噪声较大影响了乘员的驾驶体验。经过降低预警系统碰撞时间阈值和优化调整安全带的传动结构,提高了乘员的驾驶体验。该集成式主动安全系统可有效地辅助驾驶员驾驶,且满足乘员的主观可接受度。
Aiming at the situations of multi-function and low integration of advanced driver assistance system(ADAS), an integrated active safety system was proposed, which integrated reversible preloading seat belt with lane departure warning system, forward collision warning system and fatigue driving monitoring system. On the basis of discussing the working principles and control strategies of the integrated system, three factors influencing driver's subjective feeling were studied by volunteer real-road tests, which were the TTC threshold for triggering forward collision warning system, the pre-tightening forces of seat belts, and working noises generated during seat belt pre-tightening. By comparing and analyzing the subjective evaluations of volunteers and tests data, the results show that the control strategy of the integrated system is logical and it may be actively triggered to alert and restrain the occupants under various working conditions, but the driver's subjective feeling is affected by the high frequency of warning and large noises. The driver's subjective feeling was improved by lowering the TTC threshold and optimizing the transmission structures of seat belts. The integrated active safety system may effectively assist the drivers to drive and satisfy the subjective acceptability of passengers.
[1] 曹立波, 欧阳志高, 郜亢,等. 主动预紧式安全带控制系统的实现[J]. 汽车工程, 2016, 38(11):1300-1304. CAO Libo, OUYANG Zhigao, GAO Kang, et al. The Implementation of Control System for Active Pre-tensioning Safety Belt[J]. Automotive Engineering, 2016, 38(11):1300-1304.
[2] INFANTES E, SCHAUB S, KRAMER S, et al. Evaluation of Occupant Protection during the Crash phase Considering Pre-crash Safety Systems-results from the EC-funded Project Assess[C]//23rd International Technical Conference on the Enhanced Safety of Vehicles. Seoul,2013:13-0419.
[3] 曹立波, 欧阳志高, 贾寓词,等. 自动紧急制动与可逆预紧安全带共同作用下乘员损伤分析[J]. 中国机械工程, 2016, 27(16):2259-2266. CAO Libo, OUYANG Zhigao, JIA Yuci, et al. Analyses of Occupant Injury Affected by Combination of Autonomous Emergency Braking and Reversible Pretension Seatbelts[J]. China Mechanical Engineering, 2016, 27(16):2259-2266.
[4] 曹立波,欧阳志高,徐哲,等.可逆约束系统参数匹配优化研究[J].机械工程学报,2016,52(10):133-141. CAO Libo,OUYANG Zhigao, XU Zhe, et al. Research on the Optimization of Reversible Restraint Systems[J]. Journal of Mechanical Engineering, 2016,52(10):133-141.
[5] 郜亢.主动预紧式安全带控制系统研究[D].长沙:湖南大学, 2016. GAO Kang. Research on the Active Pre-tightening Seat Belt Control System[D]. Changsha:Hunan University, 2016.
[6] 胡先男.主动预紧式安全带的开发及实验研究[D].长沙:湖南大学, 2017. HU Xiannan. Development and Experimental Study of Active Pre-tightening Seat Belt[D]. Changsha:Hunan University, 2017.
[7] SONG Zhiqiang, CHOU C C, CAO Libo. et al. Study on the Key Preload Performance Parameters of an Active Reversible Preload Seatbelt(ARPS)[J]. SAE Technical Paper, 2018-01-1175.
[8] 邹杰慧, 刘秋成. 应用新型离合机构的汽车预紧式安全带MADYMO建模与仿真[J]. 中国机械工程, 2009, 20(24):3020-3023. ZOU Jiehui, LIU Qiucheng. Modeling and Simulation of a Pretension Safety Belt Installed with New Clutch Using MADYMO[J]. China Mechanical Engineering, 2009,20(24):3020-3023.
[9] 朱玉强, 张怡, 樊孝宜. 预紧式安全带关键参数分析[J]. 内江科技, 2015(5):54-55. ZHU Yuqiang, ZHANG Yi, FAN Xiaoyi. Analysis of Key Parameters of Pretension Safety Belt[J]. Neijiang Science and Technology, 2015(5):54-55.
[10] 余义. 预紧式安全带防护效率研究[D]. 武汉:武汉理工大学, 2012. YU Yi. Research on Pre-tension Seat Belt Protection Efficiency[D]. Wuhan:Wuhan University of Technology, 2012.
[11] 曹立波,欧阳志高,张冠军,等. 主动预紧式安全带的研究与开发[C]//中国汽车工程学会第十六届汽车安全技术学术会议.杭州,2013:29-34. CAO Libo, OUYANG Zhigao, ZHANG Guanjun, et al. Research and Development of Active Pre-tightening Seat Belt[C]//China Automotive Engineering Society Sixteenth Conference on Automotive Safety Technology. Hangzhou, 2013:29-34.
[12] 王飞. 主动式电机预紧安全带卷收器的研制[J]. 机电产品开发与创新, 2016, 29(2):28-30. WANG Fei. The Design of Active Motorized Pre-tight Seat Belt Retractor[J]. Development & Innovation of Machinery & Electrical Products, 2016, 29(2):28-30.
[13] HAYWARD J C. Near-miss Determination through Use of a Scale of Danger[J]. Highway Research Record(S0073-2206), 1972(384):24-34.
[14] JONES M J, VIOLA P. Robust Real-time Object Detection[J]. International Journal of Computer Vision, 2001, 57(2):87.
[15] 苏静静. 基于面部行为分析的驾驶员疲劳监测方法研究[D]. 天津:天津工业大学, 2017. SU Jingjing. Analysis of Driver Fatigue Detection Method Based on Facial Behavior[D]. Tianjin:Tianjin University of Technology, 2017.
[16] ZHANG Guanjun, YU Feng, OUYANG Zhigao, et al. Study on Vehicle Collision Predicting Using Vehicle Acceleration and Angular Velocity of Brake Pedal[J]. SAE Technical Papers, 2015-01-1405.
[17] EICHELBERGER A H, MCCARTT A T. Volvo Drivers' Experiences with Advanced Crash Avoidance and Related Technologies[J].Traffic Injury Prevention, 2014, 15(2):187-195.
[18] 欧阳志高. 可逆约束系统在正面碰撞中的乘员损伤防护效能研究[D].长沙:湖南大学,2017. OUYANG Zhigao.Investigation into the Efffectiveness of Reversible Restraint System for Occupant Injury Prevention in Frontal Collisions[D]. Changsha:Hunan University, 2017.
[19] 刘党辉,孙朋,尹云霞.嵌入式疲劳驾驶监测系统的设计与实现[J].测控技术,2010,29(5):27-31. LIU Danghui, SUN Peng, YIN Yunxia. Design and Implementation of an Embedded System for Driver Fatigue Surveillance[J]. Measurement and Control Technology,2010,29(5):27-31.
[20] 王登峰, 刘宗巍, 梁杰,等. 车内噪声品质的主观评价实验与客观量化描述[J]. 吉林大学学报(工学版), 2006, 36(增刊2):41-45. WANG Dengfeng, LIU Zongwei, LIANG Jie, et al. Subjective Evaluation Test and Objective Quantificational Description of Vehicle Interior Noise Quality[J]. Journal of Jilin University(Engineering and Technology Edition), 2006, 36(S2):41-45.
[21] 杨杨,陆森林.车内噪声的数值化分析与降噪设计[J].重庆理工大学学报(自然科学版), 2016, 30(9):26-32. YANG Yang, LU Senlin. Numerical Analysis and Design to Lower Vehicle Interior Noise[J]. Journal of Chongqing University of Technology Natural Science, 2016,30(9):26-32.