机械基础工程

变齿厚渐开线齿轮包络环面蜗杆传动啮合性能分析

  • 陈燕 ,
  • 殷国富 ,
  • 陈永洪
展开
  • 1. 四川大学空天科学与工程学院, 成都, 610065;
    2. 重庆大学机械传动国家重点实验室, 重庆, 400044
陈燕,女,1985年生,博士研究生。研究方向为机械传动。E-mail:chenyan-85@163.com。

收稿日期: 2019-08-14

  网络出版日期: 2020-07-07

基金资助

国家科技重大专项(2017ZX04020001-005);重庆市自然科学基金资助项目(cstc2018jcyjAX0301);重庆市教委科学技术项目(KJZD-K201904401,KJ1741474,KJQN201804402)

Meshing Performance Analyses of Variable Tooth Thickness Involute Gear Enveloping Hourglass Worm Drives

  • CHEN Yan ,
  • YIN Guofu ,
  • CHEN Yonghong
Expand
  • 1. School of Aeronautics&Astronautics, Sichuan University, Chengdu, 610065;
    2. State Key Laboratory of Mechanical Transmissions, Chongqing University, Chongqing, 400044

Received date: 2019-08-14

  Online published: 2020-07-07

摘要

为准确掌握变齿厚渐开线齿轮包络环面蜗杆传动的宏微观啮合性能及各设计参数对啮合性能的影响,建立了传动副数学模型,推导出啮合几何学方程,研究了螺旋角、传动比、法向模数及压力角等主要设计参数对啮合性能的影响规律;综合考虑选取优化设计参数并进行传动副样件加工,通过传动副对检试验考察了接触斑点的分布情况。分析结果表明:在满足环面蜗杆喉部中径强度和刚度要求的情况下,适当螺旋角、较大传动比、较大法向模数和较大压力角会获得优异的接触线分布、接触区域和较优的微观啮合质量;右侧的微观啮合质量优于左侧的微观啮合质量;传动副样件接触斑点与理论分析结果一致,右侧齿面接触斑点分布更好,验证了分析方法的正确性。

本文引用格式

陈燕 , 殷国富 , 陈永洪 . 变齿厚渐开线齿轮包络环面蜗杆传动啮合性能分析[J]. 中国机械工程, 2019 , 30(23) : 2798 -2808 . DOI: 10.3969/j.issn.1004-132X.2019.23.005

Abstract

In order to accurately grasp the macro-micro meshing performances of the variable tooth thickness involute gear enveloping hourglass worm drives and the influences of design parameters on meshing performances, a mathematical model of this hourglass worm drive was established. The meshing geometrical equations were deduced, and the influences of the main design parameters, such as helix angle, transmission ratio, normal modulus and pressure angle, on the meshing performance were studied. Afterwards, a sample of the transmission pairs was processed with corresponding optimal design parameters, and the distributions of contact spots were investigated by the contact tests. The results show that the suitable helix angle, larger gear ratio, larger normal modulus and larger pressure angle may achieve excellent contact line distribution and better local meshing quality under the conditions of satisfying the strength and stiffness of the hourglass worm's throat diameters. Meanwhile, the local meshing quality on the right side is better than that on the left. The contact spots of the sample are consistent with the theoretical analysis results. And the distribution of the right tooth surface contact spots is better, which verifies the correctness of the analytical method.

参考文献

[1] 王进戈, 陈永洪, 邓星桥, 等. 侧隙可调式蜗杆传动综述[J]. 西华大学学报(自然科学版), 2014, 33(4):15-19. WANG Jinge, CHEN Yonghong, DENG Xingqiao,et al. A Review of Backlash-adjustable Worm Drives[J]. Journal of Xihua University(Natural Science), 2014, 33(4):15-19.
[2] DENG Xinqiao, WANG Jinge, HORSTEMEYER M F, et al. Parametric Study of Meshing Characteristics with Respect to Different Meshing Rollers of the Anti-backlash Double-roller Enveloping Worm Gear[J]. Journal of Mechanical Design, 2012,13(8):081004.
[3] DENG X Q, WANG J G, HORSTEMEYER M F. Modification Design Method for an Enveloping Hourglass Worm Gear with Consideration of Machining and Misalignment Errors[J]. Chinese Journal of Mechanical Engineering, 2013, 26(5):948-956.
[4] 李阳, 仲梁维, 李海渊, 等. 无侧隙双滚子包络环面蜗杆传动快速设计系统[J]. 中国机械工程, 2013, 24(17):2273-2279. LI Yang, ZHONG Liangwei, LI Haiyuan, et al. Rapid Design System of Non-backlash Double-roller Enveloping Hourglass Worm[J]. China Mechanical Engineering, 2013, 24(17):2273-2279.
[5] BAIR B, TSAY C. Effects of Profile Shifted Factor and Pressure Angle on the ZK-type Dual-lead Worm Gear Drives[J]. Journal of Materials Processing Technology, 2001,112:29-36.
[6] FALAH A H, ELKHOLY A H. Load Sharing and Stress Analysis of Single Enveloping Worm Gearing Considering Transmission Errors[J]. The International Journal of Advanced Manufacturing Technology, 2008,37(3/4):211-220.
[7] KACALAK W, MAJEWSKI M, BUDNIAK Z. Innovative Design of Non-backlash Worm Gear Drives[J]. Archives of Civil and Mechanical Engineering, 2018, 18:983-999.
[8] 黄修良. 一种蜗轮蜗杆径向间隙调整结构:中国, CN104832633A[P]. 2015-08-12. HUANG Xiuliang. A Radial Clearance Adjustment Structure for Worm Gear Drive:China, CN104832633A[P]. 2015-08-12.
[9] 于春建, 黄筱调. 大重型数控转台静压主轴承载及蜗轮蜗杆啮合侧隙优化[J]. 南京工业大学学报(自然科学版), 2011,33(3):74-77. YU Chunjian, HUANG Xiaodiao. Optimization Bearing Capacity of Hydrostatic Main Shaft Bearing Worm and Gear Backlash[J]. Journal of Nanjing University of Technology(Natural Science Edition), 2011,33(3):74-77.
[10] 董龙治. 新型消隙式OTT蜗杆传动的研究[D]. 汉中:陕西理工学院, 2014:5-6. DONG Longzhi. Study of the New Type Anti-backlash OTT Worm Drive[D]. Hanzhong:Shaanxi University of Technology, 2014:5-6.
[11] 张光辉. 变齿厚平面齿轮包络环面蜗杆传动:中国, CN1257974A[P].2000-06-28. ZHANG Guanghui. Enveloping Hourglass Worm Drive with Variable Tooth Thickness Plane Gear:China, CN1257974A[P]. 2000-06-28.
[12] 张光辉, 郑洪伟, 罗文军. 圆柱蜗杆传动曳引机的剖析与改进[J].重庆大学学报(自然科学版), 2005, 28(6):1-3. ZHANG Guanghui, ZHENG Hongwei, LUO Wenjun. Analysis on Cylindrical Worm in Traction Machine and Modifications[J]. Journal of Chongqing University (Natural Science Edition),2005, 28(6):1-3.
[13] 邱昕洋, 秦大同, 张光辉. 钢制变齿厚平面蜗轮副的研制[J]. 四川大学学报(自然科学版), 2011,43(2):222-227. QIU Xinyang, QIN Datong, ZHANG Guanghui. Research on Trial-manufacture of Seel-steel Gradual-change Tooth Thickness Planar Worm Gear Drive[J]. Journal of Sichuan University(Engineering Science Edition), 2011,43(2):222-227.
[14] CHEN Yonghong, CHEN Yan, LUO Wenjun, et al. Development and Classification of Worm Drive[C]//Proceedings of the 14th IFToMM World Congress. Taipei, 2015:265-273.
[15] 陈永洪, 陈燕, 王进戈, 等. 精密重载型变齿厚渐开线齿轮包络环面蜗杆传动:中国, CN201410011144.7[P]. 2014-04-23. CHEN Yonghong, CHEN Yan, WANG Jinge, et al. Precision Heavy-duty Variable Tooth Thickness Involute Gear Enveloping Toroidal Worm Drive:China, CN201410011144.7[P]. 2014-04-23.
[16] LITVIN F L, FUENTES A. Gear Geometry and Applied Theory[M]. 2nd ed. New York:Cambridge University Press, 2004.
文章导航

/

〈 〉