针对传统的金属管材分离技术存在生产效率低、能耗高以及浪费原材料等问题,采用了一种新的管材分离方法,利用偏心加载工艺和应力集中效应促使管材表面环状V形槽底尖端处快速萌生疲劳裂纹并控制疲劳裂纹的稳定扩展。描述了管材的偏心循环加载疲劳断裂分离装置的工作原理,推导出了疲劳加载下管材V形槽根部裂纹是否起裂的判断公式。设计了线性递减、多层阶梯递减、1/4凸弧递减和1/4凹弧递减四种实验控制曲线,针对304不锈钢管材进行实验研究,实现了管材的精密分离。实验结果表明,利用V形槽的应力集中效应,在偏心加载力的持续作用下,加载频率采用多层阶梯递减控制曲线由高到低地逐渐降低加载频率,能够保证管材V形槽根部裂纹的快速萌生和稳定扩展,并可实现管材快速断裂,获得良好的断面质量。
The traditional separation processes of metal tubes had some disadvantages,such as low productive efficiency, high energy-consumption and waste of raw materials. A new method for separating tubes was adopted. The eccentric loading technology and stress concentration effect were used to promote the rapid initiation of fatigue cracks at the bottom tip of V-shaped groove and control the steady propagation of fatigue cracks. The working principles of fatigue fracture separation device under eccentric cyclic loadings were described. The judgment formula of crack initiation at the root of V-shaped groove of tubes under fatigue loadings was deduced. The four experimental control curves including linear decrement control curve, multi-step decrement control curve, 1/4 convex arc decrement and 1/4 concave arc decrement control curve were designed. The 304 stainless steel tubes were studied by experiments under the control curves, finally the tube precision separation was achieved. The experimental results show that using the stress concentration effect of V-shaped groove and the continuous action of eccentric loading forces, the loading frequencies are gradually reduced from high to low by using multi-step decrement control curve, then the rapid initiation and stable propagation of cracks at the root of V-shaped groove of tubes may be ensured. Finally, tube fast fracture is realized and good cross-section quality is obtained.
[1] 顾海澄,何家文. 节约金属材料手册[M]. 北京:机械工业出版社,1995:128-166. GU Haicheng, HE Jiawen. Save Metal Materials Manual[M]. Beijing:Mechanical Industry Press,1995:128-166.
[2] CHEN J D, WANG Y W, YU D H, et al. Brittle Precision Cropping of Metal Materials[J]. Journal of Materials Processing Technology, 1992, 32(3):415-424.
[3] CHAN L C, LEE T C. Experimental Study on the Shearing Behaviour of Fine-blanking Versus Bar Blanking[J]. Journal of Materials Processing Technology, 1998, 8(80/81):126-130.
[4] 唐勇,赵升吨,王振伟. 金属棒料精密下料新工艺及实验研究[J]. 中国机械工程, 2010,21(3):359-363. TANG Yong, ZHAO Shengdun, WANG Zhenwei. Experimental Study on New Precision Cropping Process for Metal Bars[J]. China Mechanical Engineering, 2010, 21(3):359-363.
[5] 朱良金, 陈孟杰, 王威,等. 基于三维成形极限应力图的AA6061挤压管材成形性能分析[J]. 中国机械工程, 2019, 30(11):1367-1377. ZHU Liangjin, CHEN Mengjie, WANG Wei, et al. Analysis of Forming Performances for AA6061 Extruded Tubes Based on 3D Forming Limit Stress Diagram[J]. China Mechanical Engineering, 2019, 30(11):1367-1377.
[6] 李耀辉,李永堂. 金属棒料高速精密剪切分离速度的研究与应用[J]. 热加工工艺,2010, 39(15):8-11. LI Yaohui, LI Yongtang. Research and Application of Shearing Speed of High-speed Precision Shearing for Metal Bar[J]. Hot Working Techonlogy, 2010, 39(15):8-11.
[7] ZHANG L J, ZHAO S D, LEI J. Investigation on the Bar Clamping Position of a New Type of Precision Blanking System with Variable Frequency Vibration[J]. International Journal of Machine Tools and Manufacture, 2007, 47(7):1125-1131.
[8] 傅祥炯.结构疲劳与断裂[M]. 西安:西北工业大学出版社, 1995:61-111. FU Xiangjiong. Structure Fatigue and Fracture[M]. Xi'an:Northwestern Polytechnical University Press, 1995:61-111.
[9] 李有堂,俞焕然.具有环形缺口圆杆在弯曲载荷下的裂断问题[J]. 兰州大学学报, 1996,32(4):34-39. LI Youtang, YU Huanran. The Broken Problems of the Round Stem with the Annular Gap in Bending Load[J]. The Journal of Lanzhou University, 1996,32(4):34-39.
[10] 陈斌.《机械工业"十三五"发展纲要》编制说明[J]. 电器工业, 2016(6):13-21. CHEN Bin. Description of the "13th Five-year Development Outline of Machinery Industry"[J]. China Electrical Equipment Industry, 2016(6):13-21.
[11] 樊俊铃, 郭杏林. 弹塑性疲劳裂纹扩展行为的数值模拟[J]. 机械工程学报, 2015, 51(10):33-40. FAN Junling, GUO Xinglin. Study of Laser Welded Joint Performances under Different Cooling Conditions[J]. Journal of Mechanical Engineering, 2015, 51(10):33-40.
[12] 邓德伟, 于静, 刘倩倩,等. 裂纹止裂愈合技术发展现状及展望[J]. 机械工程学报, 2016, 52(7):122-132. DENG Dewei, YU Jing, LIU Qianqian, et al. States and Prospects of Crack Arrest and Healing Technology[J]. Journal of Mechanical Engineering, 2016, 52(7):122-132.
[13] 丁华锋, 朱才朝, 宋朝省. 含缺陷铝合金厚板预拉伸断裂研究[J]. 机械工程学报, 2016, 52(12):30-36. DING Huafeng, ZHU Caichao, SONG Chaosheng. Study of Pre-stretching Fracture for Aluminum Alloy Thick Plates with Defects[J]. Journal of Mechanical Engineering, 2016, 52(12):30-36.
[14] 中国航空研究院. 应力强度因子手册(增订版)[M]. 北京:科学出版社,1993. China Aviation Institute. The Stress Intensity Factor Manual(Revised Edition)[M]. Beijing:Science Press, 1993.
[15] 化春键,赵升吨,宋涛,等. V型槽几何参数对裂纹萌生的影响规律[J]. 西安交通大学学报,2004, 38(9):947-950. HUA Chunjian, ZHAO Shengdun, SONG Tao, et al. Influence of the Geometric Parameters of the V Shaped Groove on Initialization of Ideal Crack in Precision Cropping[J].Journal of Xi'an Jiaotong Univerisity, 2004, 38(9):947-950.
[16] 赵仁峰,赵升吨,钟斌,等. 低周疲劳精密分离新工艺及试验研究[J]. 机械工程学报,2012,48(24)38-43. ZHAO Renfeng, ZHAO Shengdun, ZHONG Bin, et al. Experimental Study on New Low Cycle Fatigue Precision Cropping Process[J]. Journal of Mechanical Engineering, 2012, 48(24)38-43.
[17] 赵仁峰,赵升吨,景飞,等. 厚壁管精密分离新工艺的实验研究[J]. 锻压技术,2014, 39(8):105-108. ZHAO Renfeng, ZHAO Shengdun, JING Fei, et al. Experimental Study of Thick-wall Tubes New Precision Blanking Technology[J]. Forging & Stamping Technology, 2014, 39(8):105-108.
[18] ZHAO R F, ZHAO S D, ZHONG B, et al. Experimental Investigation on New Low Cycle Fatigue Precision Cropping Process[J]. Proceedings of the Institution of Mechanical Engineers, Part C:Journal of Mechanical Engineering Science, 2015, 229(8):1470-1476.
[19] ZHONG B, ZHAO S D, ZHAO R F. Investigation on the Influences of Clearance and Gap-sensitivity on a New Type of Metal-bar Non-chip Fine-cropping System[J]. International Journal of Mechanical Sciences, 2013, 76:144-151.