机械基础工程

H13钢激光相变硬化的组织与性能试验研究

  • 员霄 ,
  • 王井 ,
  • 何冰 ,
  • 陈志凯 ,
  • 朱青海 ,
  • 蹤雪梅
展开
  • 1. 江苏徐工工程机械研究院有限公司, 徐州, 221004;
    2. 高端工程机械智能制造国家重点实验室, 徐州, 221004
员霄,女,1988年生,工程师。研究方向为激光强化及智能制造技术。发表论文10余篇。E-mail:yunxiao0726@163.com。

收稿日期: 2019-04-12

  网络出版日期: 2020-07-07

基金资助

国家重点研发计划资助项目(2018YFB1105805);江苏省自然科学基金资助项目(BK20170245,BK20170246);江苏省国际科技合作项目(BZ2017016)

Experimental Study of Microstructure and Properties for Laser Phase-change Hardening of H13 Steel

  • YUN Xiao ,
  • WANG Jing ,
  • HE Bing ,
  • CHEN Zhikai ,
  • ZHU Qinghai ,
  • ZONG Xuemei
Expand
  • 1. Jiangsu XCMG Construction Machinery Research Institute Co. Ltd., Xuzhou, Jiangsu, 221004;
    2. State Key Laboratory of Intelligent Manufacturing of Advanced Construction Machinery, Xuzhou, Jiangsu, 221004

Received date: 2019-04-12

  Online published: 2020-07-07

摘要

为提高H13热锻模具的耐磨性能和耐腐蚀性能,利用激光相变硬化技术对H13钢进行处理,采用XRD衍射仪、光学显微镜、扫描电镜、显微硬度仪、电化学工作站及高温摩擦磨损试验机对其相结构、显微硬度、耐腐蚀性及耐高温磨损性能进行测试。硬化层由针状马氏体、板条马氏体和碳化物组成,硬化深度为0.71 mm,显微硬度约为750 HV0.3。在脱模剂溶液中,硬化层的自腐蚀电流密度比基材小一个数量级。硬化层高温磨损的质量为基材的7%,磨损机理以黏着磨损为主,同时伴有磨粒磨损和氧化磨损。

本文引用格式

员霄 , 王井 , 何冰 , 陈志凯 , 朱青海 , 蹤雪梅 . H13钢激光相变硬化的组织与性能试验研究[J]. 中国机械工程, 2020 , 31(4) : 432 -437,444 . DOI: 10.3969/j.issn.1004-132X.2020.04.009

Abstract

To improve the corrosion resistance and wear resistance of H13 steel, the phase structure, microstructure, microhardness, corrosion resistance, and wear resistance of H13 steel before and after laser phase-change hardening were compared and analyzed by means of XRD diffractometer, optical microscope, scanning electron microscope, microhardness tester, electrochemical workstation, and high temperature friction and wear tester. The microstructures of hardened layers are composed of needle martensite, strip martensite, and carbide. The hardening depth is 0.71 mm. The microhardness of the hardened layer is about 750 HV0.3. In demolder solution, the self-corrosion current density of the hardened layers is one order of magnitude smaller than that of the substrate. The high temperature wear mass of the hardening layers is 7% of as-received H13 steel. The wear mechanism is mainly adhesion wear, while accompanies abrasive wear and oxidation wear.

参考文献

[1] 王婕丽,林文松,韩沛洪,等. H13钢热锻模具早期失效分析[J].金属热处理, 2012, 37(9):122-124. WANG Jieli, LIN Wensong, HAN Peihong, et al. Failure Analysis of H13 Steel Hot-forging Die for Earlier Damage[J]. Heat Treatment of Metals, 2012, 37(9):122-124.
[2] PAPAGEORGIOU D. Failure Analysis of H13 Working Die Used in Plastic Injection Moulding[J]. Engineering Failure Analysis,2013,35(15):355-359.
[3] 韦绿梅. H13-RE热作模具钢激光表面强化处理组织和性能的研究[J]. 机械工程材料, 1996, 20(4):31-33. WEI Lvmei. Study of Microstructures and Mechanical Properties of Laser Treatmented H13-RE Hot-Worked Die Steel[J]. Materials for Mechanical Engineering, 1996, 20(4):31-33.
[4] 张春华,李春彦,张松,等. H13模具钢激光熔凝层的组织及性能[J].金属热处理,2004,29(10):14-16. ZHANG Chunhua, LI Chunyan, ZHANG Song, et al. Microstructure and Property of Laser Surface Melt-solidifying for H13 Die Steel[J]. Heat Treatment of Metals, 2004, 29(10):14-16.
[5] 徐永礼, 覃海泉, 庞祖高,等. RE-N-C-S-V-Nb多元共渗H13钢的高温耐磨性[J]. 表面技术, 2013, 42(5):45-51. XU Yongli, QIN Haiquan, PANG Zugao, et al. Wear Resistance at High Temperature of H13 Steel after RE-N-C-S-V-Nb Multi-element Penetrating College of Water Resources and Electric Power[J]. Surface Technology, 2013, 42(5):45-51.
[6] 周小平, 胡心彬, 王钰. H13钢表面反应火焰喷涂三元硼化物金属陶瓷涂层的组织和性能[J]. 中国表面工程,2009,22(2):49-52. ZHOU Xiaoping, HU Xinbin, WANG Yu. Microstructures and Properties of Mo2FeB2 Cermets Coating by Reactive Flame Spraying on the Surface of H13 Steel[J]. China Surface Engineering,2009, 22(2):49-52.
[7] 王建升, 王华昆,钟毅,等. H13钢电火花沉积层组织结构的研究[J].中国表面工程, 2003, 16(6):27-30. WANG Jiansheng, WANG Huakun, ZHONG Yi, et al. Microstructure of Electron-spark Deposited Coating on H13 Steel[J]. China Surface Engineering, 2003, 16(6):27-30.
[8] 叶四友,刘建永,杨伟,等. H13钢表面激光熔覆H13合金涂层质量研究[J].表面技术, 2015, 44(8):81-84. YE Siyou, LIU Jianyong, YANG Wei, et al. Microstructure and Properties of Co-based and H13 Alloy Coating on H13 Steel by Laser Cladding[J]. SurfaceTechnology, 2015, 44(8):81-84.
[9] 员霄, 王井, 朱青海,等. H13钢的铁基、钴基熔覆层组织与耐磨性[J]. 焊接学报, 2018, 39(12):105-109. YUN Xiao, WANG Jing, ZHU Qinghai, et al. Microstructure and Resistance of Fe-based and Co-based coating of AISI H13[J]. Transactions of the China Welding Institution, 2018, 39(12):105-109.
[10] TELASANG G. Effect of Laser Parameters Microstructure and Hardness of Laser Clad and Tempered AISI H13 Tool Steel[J]. Surface and Coating Technology, 2014, 258:1108-1118.
[11] 郭长刚,许益蒙,王凌倩,等. 激光表面强化对镁合金在模拟体液中腐蚀行为的影响[J].表面技术, 2017, 46(8):188-191. GUO Changgang, XU Yingmeng, WANG Lingqian, et al. Effect of Laser Surface Strengthening on Corrosion Behavior of Magnesium Alloy in Simulated Body Fluid[J]. Surface Technology, 2017, 46(8):188-191.
[12] 杨志翔,王爱华,熊大辉,等,钢轨表面宽带激光淬火工艺及疲劳磨损性能[J].中国机械工程, 2019, 30(3):254-260. YANG Zhixiang, WANG Aihua, XIONG Dahui, et al. Laser Wide-band Hardening of Steel Rails and Corresponding Fatigue Wear Wroperty[J]. China Mechanical Engineering, 2019, 30(3):254-260.
[13] LEE Jae-Ho, JANG Jeong-Hwan, JOO Byeong-Don, et al. Laser Surface Hardening of AISI H13 Tool Steel[J]. Trans. Nonferrous Met. Soc. China, 2009, 19:917-920.
[14] 林继兴, 曹洪钢, 牛丽媛,等. 基于正交实验的H13模具钢半导体激光表面强化工艺优化[J].应用激光, 2015, 35(3):315-317. LIN Jixing, CAO Honggang, NIU Liyuan, et al. Process Optimization of Hardening on H13 Die Steel by Diode Laser Based on Orthogonal Experiment[J]. Applied Laser, 2015, 35(3):315-317.
[15] 张亚龙, 徐新成, 杨向东,等.激光表面淬火对H13钢显微组织及性能的影响[J]. 热加工工艺, 2014, 43(8):153-155. ZHANG Yalong, XU Xincheng, YANG Xiangdong, et al. Effects of Laser Surface Quenching on Microstructure and Properties of H13 Steel[J]. Hot Working Technology, 2014, 43(8):153-155.
[16] 蔡幼庆.激光熔凝处理H13钢的组织和性能[J]. 热处理, 2004, 19(2):42-44. CAI Youqing. Micriostructures and Properties of Laser Melted H13 Steel[J]. Heat Treatment, 2004, 19(2):42-44.
文章导航

/

〈 〉