机械基础工程

复杂曲度船体外板展开算法研究

  • 陈兴怖 ,
  • 胡勇 ,
  • 黄朝炎 ,
  • 王尧 ,
  • 王健
展开
  • 1. 武汉理工大学高性能船舶技术教育部重点实验室, 武汉, 430063;
    2. 武汉理工大学交通学院, 武汉, 430063;
    3. 江南造船(集团)有限责任公司, 上海, 201913
陈兴怖,男,1993年生,硕士研究生。研究方向为船舶先进制造技术。

收稿日期: 2019-02-28

  网络出版日期: 2020-06-22

基金资助

国家自然科学基金资助项目(51779200);国防基础科研重点资助项目(JCKY2019206B001)

Research on Development Algorithm for Doubly Curvature Hull Plates

  • CHEN Xingbu ,
  • HU Yong ,
  • HUANG Chaoyan ,
  • WANG Yao ,
  • WANG Jian
Expand
  • 1. Key Laboratory of High Performance Ship Technology of Ministry of Education, Wuhan University of Technology, Wuhan, 430063;
    2. School of Transportation, Wuhan University of Technology, Wuhan, 430063;
    3. Jiangnan Shipyard(Group) Co., Ltd., Shanghai, 201913

Received date: 2019-02-28

  Online published: 2020-06-22

摘要

针对复杂曲度船体外板的展开问题,考虑到水火弯板加工工艺特点和船体外板厚度普遍较大,对几何展开算法进行了改进。采用有限单元化的思想,先将曲面离散成板条,再将板条离散成三角形平面进行展开和拼接。针对船体外板厚度大的特点,在展开之前将展开面从型表面偏移到中性层;针对水火弯板加工工艺特点,在板条拼接时消除板条间的重叠部分,保留间隙部分,从而增大展开面积,作为水火弯板加工时收缩的补偿量。为了实现展开的自动化,采用提出的算法开发了船体外板展开软件。采用实船分段对软件进行测试,并与TRIBON软件展开结果进行对比,结果表明,所有测试板的误差在1.0~1.8 mm之间,最大误差不超过2 mm,满足实际生产的需求。

本文引用格式

陈兴怖 , 胡勇 , 黄朝炎 , 王尧 , 王健 . 复杂曲度船体外板展开算法研究[J]. 中国机械工程, 2020 , 31(8) : 931 -936 . DOI: 10.3969/j.issn.1004-132X.2020.08.007

Abstract

In order to develop hull plates with doubly curvature, a geometric development algorithm was improved considering the characteristics of line-heating processes and large thickness of ship hull plates. Using the idea of finite element, the surfaces were segmented into strips firstly, and then the strips were separated into triangle planes for devolopment and splicing. In view of the characteristics of large thickness of ship hull plates, the developing surfaces were shifted from the profile surfaces to the neutral layers before development; in view of the characteristics of line-heating processes, the overlapping parts between the strips were eliminated and the gap parts were reserved during the splicing of the strips, so that the expansion areas were increased to compensate for the shrinkage of line-heating processes. In order to realize the automatic development of ship hull plates, the software was developed. And the development accuracy of the software was tested and verified by comparion with the results of TRIBON software. The results show that the errors of all test boards are between 1.0 mm and 1.8 mm, and the maximum error is not more than 2 mm, which may meet the actual production requirements.

参考文献

[1] 席平. 三维曲面的几何展开[J].计算机学报,1997,20(4):315-322. XI Ping. Geometric Approach of 3D Surface Development[J].Chinese J. Computers, 1997, 20(4):315-322.
[2] PARIDA L. MUDUR S I P. Constaint-satifying Planar Development of Complex Surfaces[J]. CAD, 1993, 25(4):225-232.
[3] 张冬娟, 苏世忠, 李明哲. 无模多点成形中三维曲面工件的展开方法[J]. 塑性工程学报, 2003, 10(4):34-37. ZHANG Dongjuan, SU Shizhong, LI Mingze. Development Methods for the Three-dimensional Surface in the Multi-point Forming[J]. Journal of Plasticity Engineering, 2003, 10(4):34-37.
[4] 张冬娟. 板类件自由曲面展开程序设计[D]. 长春:吉林大学, 2003. ZHANG Dongjuan. Program Design for Free-form Surface Deployment of Plate Parts[D]. Changchun:Jilin University, 2003.
[5] 朱秀莉, 刘玉君, 纪卓尚,等. 基于伪直母线的船体曲面钢板展开方法[J]. 船舶力学, 2009, 13(6):934-941.ZHU Xiuli, LIU Yujun, JI Zhuoshang, et al. A Method for Development of Hull Plate Surface Based on Its Quasi-rulings[J]. Journal of Ship Mechanics, 2009, 13(6):934-941.
[6] 席平. 复杂类薄板件的二维展开[J]. 中国机械工程, 1997, 8(4):34-36. XI Ping. Two Dimensional Expansion of Complex Sheet Metal Parts[J]. China Mechanical Engineering, 1997,8(4):34-36.
[7] 许江平, 柳玉起, 杜亭,等. 任意复杂曲面的展平算法及其在五金零件毛坯展开中的应用[J]. 中国机械工程, 2008, 19(2):193-195. XU Jiangping, LIU Yuqi, DU Ting, et al. Algorithm for Arbitrary Complex Surface Flattening and Its Application in Unfolding Metal Blank[J]. China Mechanical Engineering,2008, 19(2):193-195.
[8] 陈功, 周来水, 安鲁陵, 等. 一种通用的复杂曲面展开方法研究[J]. 中国机械工程, 2007, 18(24):2914-2920. CHEN Gong, ZHOU Laishui1, AN Luling, et al. Study on a General Method on Flattening of Complex Surfaces[J]. China Mechanical Engineering, 2007, 18(24):2914-2920.
[9] 王弘,王昌凌. 基于能量模型的曲面展开通用算法[J].计算机辅助设计与图形学学报, 2001, 13(6):556-560. WANG Hong,WANG Changlin. A General Surface Development Algorithm Based on Energy Model[J]. Journal of Computer Aided Design &Amp, Computer graphics, 2001, 13(6):556-560.
[10] 王弘,王昌凌. 基于物理模型的参数化曲面展开[J]. 华中科技大学学报(自然科学版), 2000, 28(3):10-12. WANG Hong,WANG Changli. Parametric Surface Development Based on Physical Model[J]. Journal of Huazhong University of Science and Technology (Natural Science Edition), 2000, 28(3):10-12.
[11] 毛国栋, 孙炳楠, 徐浩祥. 基于弹簧-质点系统的薄膜结构曲面展开算法[J]. 浙江大学学报(工学版), 2005, 39(8):1238-1242. MAO Guidong, SUN Bingnan, XU Haoxiang. Membrance Surface Flattening Algorithm Based on Spring-mass System[J]. Journal of Zhejiang University (Engineering Science), 2005, 39(8):1238-1242.
文章导航

/

〈 〉