机械基础工程

超高压大流量比例插装阀测试方法

  • 姚静 ,
  • 寇成浩 ,
  • 尹钰鑫 ,
  • 孔祥东 ,
  • 孙瑞辉 ,
  • 李昊
展开
  • 1. 燕山大学机械工程学院, 秦皇岛, 066004;
    2. 燕山大学河北省重型机械流体动力传输与控制实验室, 秦皇岛, 066004;
    3. 流体动力与机电系统国家重点实验室, 杭州, 310027;
    4. 上海诺玛液压系统有限公司, 上海, 201100;
    5. 燕山大学车辆与能源学院, 秦皇岛, 066004
姚静,女,1978年生,教授。研究方向为重型机械流体传动与控制系统和新型液压元件。发表论文50余篇。

收稿日期: 2018-10-26

  网络出版日期: 2020-06-22

基金资助

国家自然科学基金资助项目(51575471);河北省自然科学基金资助项目(E2018203028);流体动力与机电系统国家重点实验室开放基金资助项目(GZKF-201716)

Test Methods of Ultra-high Pressure and Large Flow Proportional Cartridge Valves

  • YAO Jing ,
  • KOU Chenghao ,
  • YIN Yuxin ,
  • KONG Xiangdong ,
  • SUN Ruihui ,
  • LI Hao
Expand
  • 1. School of Mechanical Engineering, Yanshan University, Qinhuangdao, Hebei, 066004;
    2. Hebei Province Key Laboratory of Heavy Machinery Fluid Power Transmission and Control, Yanshan University, Qinhuangdao, Hebei, 066004;
    3. State Key Laboratory of Fluid & Mechatronic Systems, Hangzhou, 310027;
    4. Shanghai Radk-Tech Hydraulic System Co., Ltd., Shanghai, 201100;
    5. School of Vehicle and Energy, Yanshan University, Qinhuangdao, Hebei, 066004

Received date: 2018-10-26

  Online published: 2020-06-22

摘要

针对超高压大流量比例插装阀测试技术问题,以DN130位移随动式超高压大流量二通比例插装阀为对象,考虑该阀测试需针对超高压(70 MPa)、大流量(8 000 L/min)的特殊工作要求,设计了超高压试验台和高压大流量试验台。根据行业测试标准制定耐压特性和动静态特性测试方法,试验台流量无法满足测试需求时,采用基于模型的仿真预测方法进行性能检测。试验结果表明了该阀具有良好的耐压性能、流量增益特性、滞环特性、线性度特性、重复精度特性以及动态特性,为超高压大流量比例插装阀的设计测试提供了工程基础。

本文引用格式

姚静 , 寇成浩 , 尹钰鑫 , 孔祥东 , 孙瑞辉 , 李昊 . 超高压大流量比例插装阀测试方法[J]. 中国机械工程, 2020 , 31(6) : 638 -646 . DOI: 10.3969/j.issn.1004-132X.2020.06.002

Abstract

Aiming at the shortage of testing technology for ultra-high pressure and large flow proportional cartridge valves, taking the DN130 displacement follow-up ultra-high pressure and large flow two-way proportional cartridge valve as object, special work requirements for 70MPa ultra-high pressure and 8000L/min large flow were considered. Ultra-high pressure test bench and high-pressure large-flow test bench were designed. Test methods for pressure-resistance characteristics and dynamic and static characteristics were formulated based on the industrial test standard. The model-based simulation prediction method was adopted when the test bench flow could not be reached. The test results show that the valve has good pressure-resistance characteristics flow gain characteristics, hysteresis characteristics, linearity characteristics, repeatability characteristics and dynamic characteristics, which provides a practical basis for the design and test of ultra-high pressure and high flow proportional cartridge valves.

参考文献

[1] 李明生,叶进,谢斌,等. 拖拉机液压底盘液控比例流量阀设计与试验[J]. 农业机械学报,2018,49(4):397-403. LI Mingsheng, YE Jin, XIE Bin, et al. Design and Test of Hydraulic Proportional Flow Valve for Hydraulic Chassis in Tractor[J]. Transactions of the Chinese Society for Agricultural Machinery, 2018,49(4):397-403.
[2] 覃功.试论工程机械中的超高压液压技术[J].科技资讯,2014,12(4):100. QIN Gong. On the Ultra-high Pressure Hydraulic Technology in Construction Machinery[J].Science and Technology Information,2014,12(4):100.
[3] KOLCHINSKY A E. High Flow Proportional Pressure Reducing Valve:US, US6161585[P]. 2000-12-19.
[4] 邵玉强,周善舰.一种超高压比例泄压阀:中国,CN102287412B[P].2013-09-25. SHAO Y Q, ZHOU S J. Ultra-high Pressure Proportional Relief Valve:China, CN102287412B[P]. 2013-09-25.
[5] 焦建平.超高压液压技术的应用[J].液压与气动,2010(8):76-77. JIAO Jianping. Application of Extra High Pressure Hydraulic Technology[J]. Hydraulic & Pneumatics, 2010(8):76-77.
[6] 王建国.国内外超高压液压技术现状及发展趋势[J].中国重型装备,2013(2):6-7. WANG Jianguo. Present Status and Development Tendency of Superpressure Hydraulic Technique Both at Home and Abroad[J].China Heavy Equipment,2013(2):6-7.
[7] 缪骋. 插装式比例溢流阀的关键技术研究[D].泉州:华侨大学,2017. MIAO Cheng. Research on the Key Technologies of Cartridge Proportional Relief Valve[D]. Quanzhou:Huaqiao University,2017.
[8] 米家宝. 超高压电磁换向阀设计与研究[D].湘潭:湖南科技大学,2015. MI Jiabao. Design and Research of Superpressure Solenoid Directional Control Valve[D]. Xiangtan:Hunan University of Science and Technology, 2015.
[9] 王灏,黄越,罗刚,等. 基于双线性插值原理的比例调速阀特性研究[J]. 机床与液压,2018,46(11):82-84. WANG Hao, HUANG Yue, LUO Gang, et al. Research on Characteristic of Proportional Flow Valve Based on Bilinear Interpolation Principal[J]. Machine Tool & Hydraulics, 2018,46(11):82-84.
[10] 柯明纯. 液压马达和电液比例节流阀性能分析与测试的研究[D].杭州:浙江大学,2006. KE Mingchun. Research on Performance Analysis and Testing of Hydraulic Motor and Electro-hydraulic Proportional Throttle[D]. Hangzhou:Zhejiang University, 2006.
[11] 王婷婷,周华,黎申,等.柴油共轨系统比例节流阀性能测试系统的研制[J].液压与气动,2013(7):102-104. WANG Tingting, ZHOU Hua, LI Shen, et al. Test Rig for Proportional Throttle Valve of Diesel Common Rail System[J].Hydraulic & Pneumatics, 2013(7):102-104.
[12] 中国机械工业联合会. JB/T 10414-2004液压二通插装阀试验方法(2010确认)[S]. 北京:机械工业出版社,2005. China Machinery Industry Federation. JB/T 10414-2004 Hydraulic Two-way Cartridge Valve Test Method (2010 Confirmed)[S]. Beijing:Mechanical Industry Press, 2005.
[13] 王宣银,孙赫,李潇潇,等.电液伺服阀动静特性一体化自动测试系统研制[J].机床与液压,2010,38(20):37-38. WANG Xuanyin, SUN He, LI Xiaoxiao,et al. Development of Integrated Automatic Test System for Electro-hydraulic Servo Valve Dynamic and Static Characteristics[J]. Machine Tool & Hydraulics, 2010, 38(20):37-38.
[14] 于良振,王明琳,方锦辉.大流量电液比例插装阀液压测试试验台的设计[J].液压气动与密封,2010,30(9):37-39. YU Liangzhen, WANG Minglin, FANG Jinhui. Design of a Hydraulic Test-bed for the Large Flow Double Proportional Cartridge Valves[J]. Hydraulics & Pneumatics, 2010,30(9):37-39.
[15] 乔西宁. 超高压大流量插装式电液比例溢流阀的研究[D].杭州:浙江大学,2018. QIAO Xining. Research on Ultra-high Pressure and Large Flow Rate Electro-hydraulic Proportional Relief Valve[D]. Hangzhou:Zhejiang University, 2018.
[16] 中国机械工业联合会. JB/T 10374-2013液压溢流阀[S]. 北京:机械工业出版社,2014. China Machinery Industry Federation. JB/T 10374-2013 Hydraulic Relief Valve[S]. Beijing:Mechanical Industry Press, 2014.
文章导航

/

〈 〉