将动力电池短路失效分析引入电动汽车侧面柱碰撞研究中,利用动态拓扑优化方法对某电池系统结构进行优化设计,基于拓扑结果搭建具有更佳承载路径的新型电池系统结构,同时通过正交试验对其厚度分布进行优化。相比于原结构,新结构在不增大质量的情况下极大地减小了侧面柱碰撞后电池系统的结构变形和电池短路失效,显著提高了动力电池的碰撞安全性。
The short-circuit failure analysis of power cells was introduced into electric vehicle pole side impact researches, the dynamic topology optimization method was used to optimize the design of battery system structures. A new battery system structure with better load paths was built based on the topology results, and the thickness distribution was optimized by orthogonal test. Compared with the original structure, the new structure greatly reduces the structural distortions and battery failures under pole side impacts without increasing mass, and significantly improves the crash safety of the power batteries.
[1] SAHRAEI E,HILL R,WIERZBICKI T. Calibration and Finite Element Simulation of Pouch Lithiumion Batteries for Mechanical Integrity[J].Journal of Power Sources,2012,201:307-321.
[2] SAHRAEI E,MEIER J, WIERZBICKI T. Characterizing and Modeling Mechanical Properties and Onset of Short Circuit for Three Types of Lithiumion Pouch Cells[J].Journal of Power Sources,2014,247:503-516.
[3] SAHRAEI E,CAMPBELL J,WIERZBICKI T. Modeling and Short Circuit Detection of 18650 Li-ion Cells under Mechanical Abuse Conditions[J].Journal of Power Sources,2012,220:360-372.
[4] SAHRAEI E,KAHN M,MEIER J.Modelling of Cracks Developed in Lithiumion Cells under Mechanical Loading[J].Royal Society of Chemistry,2015,5:80369.
[5] WANG H,SIMUNOVIC S,MALEKI H.Internal Configuration of Prismatic Lithiumion Cells at the Onset of Mechanically Induced Short Circuit[J].Journal of Power Sources, 2016,306:424-430.
[6] WANG H,KUMAR A,SIMUNOVIC S.Progressive Mechanical Indentation of Large-format Li-ion Cells[J].Journal of Power Sources 2017,341:156-164.
[7] GREVE L,FEHRENBACH C.Mechanical Testing and Macro-mechanical Finite Element Simulation of the Deformation,Fracture, and Short Circuit Initiation of Cylindrical Lithium Ion Battery Cells[J]. J. Power Sources,2012,214(4):377-385.
[8] 赵红伟,陈潇凯,林逸.电动汽车动力电池仓拓扑优化[J].吉林大学学报(工学版),2009, 39(4):846-850. ZHAO Hongwei, CHEN Xiaokai, LIN Yi. Topology Optimization of Power Battery Cabin in Electric Vehicle[J]. Journal of Jilin University (Engineering and Technology Edition), 2009, 39(4):846-850.
[9] 杨书健.电动汽车电池箱动静态特性分析及其结构优化设计[D].长沙:湖南大学,2012. YANG Shujian. Static-dynamic Analysis and Structural Optimization of Electric Vehicle Battery Box[D]. Changsha:Hunan University, 2012.
[10] 雷正保,刘助春,廖卓.纯电动汽车白车身耐撞性拓扑优化设计方法[J].郑州大学学报(工学版), 2016, 37(5):77-81. LEI Zhengbao, LIU Zhuchun, LIAO Zhuo. Crashworthiness Topology Optimization Method of Pure Electric Car BIW[J]. Journal of Zhengzhou University (Engineering Science), 2016, 37(5):77-81.
[11] 谢伦杰.基于多目标拓扑优化的电动汽车正碰安全性研究[D].长沙:湖南大学,2012. XIE Lunjie. Research on Safety of Electric Vehicle Frontal Collision Based on Multi-objective Topology Optimization[D]. Changsha:Hunan University, 2012.
[12] 李仲奎,夏卫群,秦信武.纯电动轿车侧面碰撞安全性能提升[J].汽车科技,2014(1):11-16. LI Zhongkui, XIA Weiqun, QIN Xinwu. Improvement of the Safety Capability on Lateral Collision for Pure Electric Car[J]. Automotive Technology, 2014(1):11-16.
[13] 朱海涛,张振鼎,张向磊.侧面柱碰撞标准的发展趋势探讨[J].交通标准化,2012(24)::3-39. ZHU Haitao, ZHANG Zhending, ZHANG Xianglei. Developing Trends of Pole Side Impact Standard[J]. Standard Interpretation and Applicationd, 2012(24)::3-39.
[14] FUNCKE M,SCHAFER S, WOHLECKER R. Evaluation Report on Active and Passive Protection Solution 265629[R].OSTLER-Optimised Storage Integration for the Electric Car, 2010.
[15] KUKREJA J,NGUYEN T,SIEGMUND T.Crash Analysis of a Conceptual Electric Vehicle with a Damage Tolerant Battery Pack[J].Extreme Mechanics Letters,2016(9):371-378.
[16] PATEL N M,KANG B,RENAUD J E,Crashworthiness Design Using Topology Optimization[J].Journal of Mechanical Design,2009(6):061013.
[17] 雷正保,何茹,王瑞.纯电动汽车正面碰撞相容性车头拓扑优化设计[J].计算力学学报,2014,31(6):722-728. LEI Zhengbao, HE Ru, WANG Rui. Topology Optimization Design of Pure Electric Vehicle Head Based on Frontal Crash Compatibility[J].Journal of Computational Mechanics, 2014,31(6):722-728.
[18] 聂昕,黄鹏冲,陈涛.基于耐撞性拓扑优化的汽车关键安全件设计[J].中国机械工程,2013,24(23):3260-3265. NIE Xin, HUANG Pengchong, CHEN Tao. Topology Optimization of Automotive Key Safety Component Design Based on Crashworthiness[J]. China Mechanical Engineering, 2013,24(23):3260-3265.
[19] Livermore Software Technoloy Corporation. The LS-TaSC Tool Topology and Shape Computations. User's Manual,Version 3.2[M]. Troy:Livermore Software Technology Corporation, 2016.