机械基础工程

在线电解修整磨削氧化膜研究现状及展望

  • 伍俏平 ,
  • 郑维佳 ,
  • 邓朝晖 ,
  • 赵恒
展开
  • 1. 湖南科技大学智能制造研究院, 湘潭, 411201;
    2. 难加工材料高效精密加工湖南省重点实验室, 湘潭, 411201
伍俏平,男,1981年生,副教授。研究方向为新型工具制备及高效精密加工。获发明专利10余项。发表论文40余篇。E-mail:meis-hanzi11@sina.com.

收稿日期: 2017-07-30

  网络出版日期: 2018-09-10

基金资助

国家自然科学基金资助项目(51575179,51205126);湖南省自然科学基金资助项目(2017JJ3073,12JJB006)

Research Status and Perspectives of ELID Grinding Oxidation Films

  • WU Qiaoping ,
  • ZHENG Weijia ,
  • DENG Zhaohui ,
  • ZHAO Heng
Expand
  • 1. Institute of Intelligent Manufacturing, Hunan University of Science and Technology, Xiangtan, Hunan, 411201;
    2. Hunan Province Key Laboratory of High Efficiency and Precision Machining of Difficult to Machine Materials, Xiangtan, Hunan, 411201

Received date: 2017-07-30

  Online published: 2018-09-10

摘要

在线电解修整(ELID)镜面磨削加工中,电解作用会使砂轮表面生成一层具有绝缘作用的氧化膜,该氧化膜可以减缓和阻止进一步电解,避免砂轮损耗过快;同时,氧化膜可容纳、承托大量因电解而脱落的磨粒,使得砂轮的磨削类同游离磨粒的研磨、抛光作用,有利于提高磨削表面质量。氧化膜在整个磨削过程中发挥着至关重要的作用,直接影响着ELID磨削加工表面质量和磨削效率。详细阐述了ELID磨削过程中氧化膜的成膜过程及表征方法、氧化膜的物理/化学特性、氧化膜成膜影响因素等方面的研究进展,并对ELID磨削氧化膜下一步的研究重点进行了展望。

本文引用格式

伍俏平 , 郑维佳 , 邓朝晖 , 赵恒 . 在线电解修整磨削氧化膜研究现状及展望[J]. 中国机械工程, 2018 , 29(17) : 2023 -2030 . DOI: 10.3969/j.issn.1004-132X.2018.17.002

Abstract

The oxidation films formed on the surfaces of wheels played an important role in the grinding performance during the ELID grinding processes,which might prevent further electrolysis and avoid excessive wear of the grinding wheels. And the oxidation film could accommodate a large number of abrasive particles that were dropped due to electrolysis,this made wheel grinding just like the polishing of free abrasive particles,which was beneficial to improve the grinding surface quality. The properties of oxidation film directly affected the grinding efficiency and surface quality of ELID grinding. This paper mainly introduced the formation and characterization of the oxidation films,physical and chemical properties of the oxidation films and influence factors of oxidation film formation. And the next steps of the researches of the oxidation films in ELID grinding were prospected.

参考文献

[1] OHMORI H,LIN W,KATAHIRAI K,et al. Developmental History and Variation of Precision and Efficient Machining Assisted with Electrolytic Process Principle and Applications[C]//The First International ELID Grinding Conference. Changsha, 2008:1-5.
[2] YIN S H,OHMORI H,DAI Y T,et al. ELID Grinding Characteristics of Glass-Ceramic Materials[J]. International Journal of Machine Tools&Manufacture,2009,49:333-338.
[3] 尹韶辉,曾宪良,范玉峰,等. ELID镜面磨削加工技术研究进展[J].中国机械工程, 2010, 21(6):750-755. YIN Shaohui,ZENG Xianliang,FAN Yufeng,et al. Research Progress of ELID Mirror Grinding Technology[J]. China Mechanical Engineering, 2010, 21(6):750-755.
[4] EBBRELL S,WOOLLEY N H,TRIDIMAS Y D, et al. The Effects of Cutting Fluid Application Methods on the Grinding Process[J]. International Journal of Machine Tools&Manufacture,2000,40(2):209-223.
[5] WU M L,ZHANG K F,REN C Z. Study on the Non-uniform Contact during ELID Groove Grinding[J].Precision Engineering,2015, 39:116-124.
[6] LIM H S,FATHIMA K,KUMAR A S,et al. A Fundamental Study on the Mechanism of Electrolytic In-process Dressing (ELID) Grinding[J]. International Journal of Machine Tools&Manufacture, 2002,42:935-943.
[7] SALEH T,RAHMAN M S,LIM H S,et al. Development and Performance Evaluation of an Ultra Precision ELID Grinding Machine[J]. Journal of Materials Processing Technology,2007,192(10):287-291.
[8] KHOSHAIM A B,MARINESCU I D. The Influence of Wheel Grain Size on the Surface Roughness in ELID Fine Grinding of SiC Ceramics[J]. International Journal Abrasive Technology,2014,6(4):324-335.
[9] QIAN J,OHMORI H,LIN W. Internal Mirror Grinding with a Metal/Metal-Resin Bonded Abrasive Wheel[J]. International Journal of Machine Tools&Manufacture,2001,41(2):193-208.
[10] NEMOTO A,ITOH N,KATOH T,et al. Development of R. B. Ceramics Bonded Diamond Wheel for Eco-friendly ELID Grinding[J]. Journal of the Japan Society for Abrasive Technology,2005,48(10):578-583.
[11] FATHIMA K,SCHINHAERL M,GEISS A,et al. Wear Analysis of Electrolytically Dressed Wheels for Finishing Substrate Materials[J]. Tribology International,2010,43(2):245-251.
[12] KIM H Y,AHN J H,SEO Y H. Study on the Estimation of Wheel State in Electrolytic In-process Dressing (ELID) grinding[C]//IEEE International Symposium on Industrial Electronics. Pusan, 2001:1615-1618.
[13] KARPUSCHEWSKI B,WEHMEIER M,INASAKI I. Grinding Monitoring System Based on Power and Acoustic Emission Sensors[J]. CIRP Annals-Manufacturing Technology,2000,49(1):235-240.
[14] SALEH T,BISHWAS I,RAHMAN M. Efficient Dressing of the Wheel in ELID Grinding by Controllable Voltage with Force Feed Back[J]. International Journal of Advanced Manufacturing Technology,2010,46(1/4):123-130.
[15] 王海营. ELID磨削砂轮表面钝化膜状态表征与控制[D].天津:天津大学,2007. WANG Haiying. Characterization and Control of Passivation Film Surface of ELID Grinding Wheel[D].Tianjin:Tianjin University,2007.
[16] KERSSCHOT B,QIAN J,REYNAERTS D. On the Dressing Behavior in ELID Grinding[J]. Procedia CIRP,2013,6:632-637.
[17] ZHANG F H,QIU Z J,KANG G W,et al. High Efficiency ELID Grinding of Garnet Ferrite[J]. Journal of Materials Processing Technology, 2002, 129:41-44.
[18] ZHANG K F,REN C Z,YANG L J,et al. Precision Internal Grinding of Bearing Steel Based on the State Control of Oxide Layer with Electrolytic In-process Dressing[J]. Journal of Materials Processing Technology,2012,212:1611-1621.
[19] DAI Y,OHMORI H,LIN W M,et al. A Fundamental Study on Optimal Oxide Layer of Fine Diamond Wheels during ELID Grinding Process[J]. Key Engineering Materials,2006, 304/305:176180.
[20] 关佳亮,郭东明,袁哲俊. ELID镜面磨削中砂轮生成氧化膜特性及其作用的研究[J].机械工程学报, 2000,36(5):89-92. GUAN Jialiang,GUO Dongming,YUAN Zhejun. Study on Properties and Effects of Grinding Wheel in ELID Mirror Grinding[J]. Journal of Mechanical Engineering,2000,36(5):89-92.
[21] 郐吉才,张飞虎,张勇,等. ELID磨削砂轮表面氧化膜力学性能[J].纳米技术与精密工程,2010,8(5):447-451. KUAI Jicai,ZHANG Feihu,ZHANG Yong,et al. Mechanical Properties of ELID Grinding Wheel Surface Oxide Film[J]. Nanotechnology and Precision Engineering,2010,8(5):447-451.
[22] 杨黎健,任成祖,靳新民. ELID磨削砂轮表面氧化膜状态的表征[J].工具技术,2011,45(6):40-43. YANG Lijian,REN Chengzu,JIN Xinmin. Study on the State of Oxide Film on ELID Grinding Wheel[J]. Tool Technology,2011,45(6):40-43.
[23] 孙斌. ELID磨削砂轮表面氧化膜状态表征[D].天津:天津大学,2008. SUN Bin. Characterization of Oxide Film Surface of ELID Grinding Wheel[D]. Tianjin:Tianjin University,2008.
[24] FATHIMA K,RAHMAN M,KUMAR A S,et al. Modeling of Ultra-precision ELID Grinding[J]. Journal of Manufacturing Science&Engineering, 2007,129(2):296-302.
[25] REN C Z,CHE J M,WANG T Y,et al. ELID Grinding Based on the State Control of Passivating Films[J]. Key Engineering Materials,2006,315/316:225-229.
[26] MA B J,WANG Y X. Principle and Method for Oxidation Layer Measurement in Electrolytic In Process Dressing (ELID) Grinding[J]. Advanced Materials Research,2011,301/303(1):515-519.
[27] YANG L J,REN C Z,Jin X M. Experimental Study of ELID Grinding Based on the Active Control of Oxide Layer[J]. Journal of Materials Processing Technology,2010,210:1748-1753.
[28] ZHANG H L,KUAI J C. Forming Mechanism of α-Fe2O3 in the Oxide Films on Iron-Bonded Diamond Wheel Surface by ELID Grinding[J]. Key Engineering Materials,2016,723:434-438.
[29] KUAI J C,ARDASHEV D V,ZHANG H L. Study of α-Fe2O3 Formation and Its Measurement in Oxide Films of Wheel Surface during ELID Grinding Process[J]. Modern Physics Letters B, 2017,31(4):597-606.
[30] 王树启.砂轮在线电解修锐(ELID)技术在工程陶瓷高速磨削中的应用研究[D].长沙:湖南大学, 2006. WANG Shuqi. The Research on the Application of Electrolytic In-process Dressing Technology in High Speed Grinding of Advanced Ceramics[J]. Changsha:Hunan University, 2006.
[31] BIFANO T, KRISHNAMOORTHY R, FAWCETT H,et al. Fixed-load Electrolytic Dressing with Bronze Bonded Grinding Wheels[J]. Journal of Manufacturing Science&Engineering, 1999, 121(1):20-27.
[32] KLOCKE F,KLINK A,HENERICHS M. ELID Dressing Behaviour of Fine Grained Bronze Bonded Diamond Grinding Wheels[J]. International Journal of Abrasive Technology,2009,2(4):358-367.
[33] 关佳亮,郭东明,周曙光,等. ELID镜面磨削技术——砂轮快速修整技术的研究[J].制造技术与机床,2001(4):18-20. GUAN Jialiang, GUO Dongming, Zhou Shuguang,et al. ELID Mirror Grinding Technology-Grinding Wheel Rapid Trimming Technology Research[J]. Manufacturing Technology and Machine Tool,2001(4):18-20.
[34] ITOH N,OHMORI H,MORIYASU S,et al. Finishing Characteristics of Brittle Materials by ELID-Lap Grinding Using Metal-resin Bonded wheels[J]. International Journal of Machine Tools&Manufacture,1998,38(7):747-762.
[35] KERSSCHOT B, QIAN J, REYNAERT D. Growth and Properties of the Passivation Layer in ELID Grinding[J]. The Third International Conference on Nano-manufacturing,2012, 3:414-417.
[36] BAFAKEEH O T,KHOSHAIM A B,MARINESCU I D. ELID Fine Grinding of Sapphire Rollers with Emphasis on Roughness and Material Removal Rate[J]. Procedia Manufacturing,2016,5:1249-1264.
[37] ZHANG C H,OHMORI H,KATO T,et al. Evaluation of Surface Characteristics of Ground CVD-SiC Using Cast Iron Bond Diamond Wheels[J]. Precision Engineering,2001,25(1):56-62.
[38] FATHIMA K,KUMAR A S,RAHMAN M,et al. A Study on Wear Mechanism and Wear Reduction Strategies in Grinding Wheels Used for ELID Grinding[J]. Wear,2003,254(12):1247-1255.
[39] SHANAWAZ A M,SUNDARAM S,PILLAI U T S,et al. Characteristics of Electrolysis In-process Dressing Grinding of Al/SiCp Composite Materials[J]. Journal of Composite Materials,2011, 45(3):357-367.
[40] SALEH T,RAHMAN M. In-Process Truing for ELID (Electrolytic In-Process Dressing) Grinding by Pulse Width Control[J]. IEEE Transactions on Automation Science&Engineering,2011,8(2):338-346.
[41] ISLAM M M,KUMAR A S,BALAKUMAR S, et al. Characterization of ELID Grinding Process for Machining Silicon Wafers[J]. Journal of Materials Processing Technology,2008, 1998:281-290.
[42] RAHMAN M,KUMAR A S,LIM H S,et al. Nano Finish Grinding of Brittle Materials Using Electrolytic In-process Dressing (ELID) Technique[J]. Sadhana,2003,28(5):957-974.
[43] 肖强,千学明,沈云波,等. ELID镜面磨削硬质合金的工艺参数实验研究[J].制造技术与机床,2007(4):75-79. XIAO Qiang,QIAN Xueming,SHEN Yunbo,et al. Experimental Study on Technological Parameters of ELID Mirror Grinding Carbide[J]. Manufacturing Technology and Machine Tool, 2007(4):75-79.
[44] YU X L,HUANG S T,XU L F. ELID Grinding Characteristics of SiC p/Al Composites[J]. The International Journal of Advanced Manufacturing Technology,2016, 86:1165-1171.
[45] 朱育权,马保吉,STEPHENSON D J. ELID超精密磨削砂轮表面氧化膜形成行为的实验研究[J].铸造技术,2008,29(8):1113-1115. ZHU Yuquan,MA Baoji,STEPHENSON D J. Experimental Study on the Formation Behavior of ELID Ultra-precision Grinding Wheel Surface Oxidation Film[J]. Foundry Technology,2008,29(8):1113-1115.
[46] 伍俏平,王煜,瞿为,等.在线电解修整磨削液研究现状及其展望[J].中国机械工程,2017,28(9):1118-1125. WU Qiaoping,WANG Yu,QU Wei,et al. Research Status and Perspectives of ELID Grinding Fluid[J]. China Mechanical Engineering, 2017,28(9):1118-1125.
[47] IRANI R A,BAUER R J,WARKENTIN A. A Review of Cutting Fluid Application in the Grinding Process[J]. International Journal of Machine Tools&Manufacture,2005,45(15):1696-1705.
[48] ISLAM M M,KUMAR A S,BALAKUMAR S. Performance Evaluation of a Newly Developed Electrolytic System for Stable Thinning of Silicon Wafers[J]. Thin Solid Films, 2006, 504(1):15-19.
[49] OHMORI H,TAKAHASHI I,BANDYOPADHYAY B P. Ultra-precision Grinding of Structural Ceramics by Electrolytic In-process Dressing (ELID) Grinding[J]. Journal of Materials Processing Technology,1996,57(3/4):272-277.
[50] KATAHIRA K,OHMORI H,UEHARA Y,et al. ELID Grinding Characteristics and Surface Modifying Effects of Aluminum Nitride (AlN) Ceramics[J]. International Journal of Machine Tools&Manufacture,2005,45(7/8):891-896.
[51] OHMORI H,KATAHIRA K,AKINOU Y,et al. Investigation on Grinding Characteristics and Surface-Modifying Effects of Biocompatible Co-Cr Alloy[J]. CIRP Annals-Manufacturing Technology,2006,55(1):597-600.
[52] 关佳亮,郭东明,周曙光,等. ELID镜面磨削技术——金属结合剂砂轮的研制[J].制造技术与机床,2001(3):25-27. GUAN Jialiang, GUO Dongming, ZHOU Shuguang,et al. ELID Mirror Grinding Technology-Metal Binder Grinding Wheel Development[J]. Manufacturing Technology and Machine Tool, 2001(3):25-27.
[53] 金卫东.硬脆材料氮化硅陶瓷的ELID超精密磨削技术研究[D].天津:天津大学,2005. JIN Weidong. ELID Ultra-precision Grinding Technology of Hard and Brittle Silicon Nitride Ceramics[D]. Tianjing:Tianjin University,2005.
[54] OHMORI H,NAKAGAWA T. Analysis of Mirror Surface Generation of Hard and Brittle Materials by ELID Grinding with Superfine Grain Metallic Bond Wheels[J]. CIRP Annals-Manufacturing Technology,1995,44(1):287-290.
[55] 申泽骥,苏贵桥.铸铁的电化学腐蚀机理[J].现代铸铁,2002(1):13-16. SHEN Zeji,SU Guiqiao. Electrochemical Corrosion Mechanism of Cast Iron[J]. Modern Cast Iron,2002(1):13-16.
[56] 耿宝功.竹陶瓷砂轮的电化学性能及新型ELID磨削液的研究[D].杭州:浙江工业大学,2010. GENG Baogong. The Electrochemical Performance of Bamboo Ceramic Grinding Wheel and the New ELID Grinding Fluid[D]. Hangzhou:Zhejiang University of Technology,2010.
[57] ITOH N,NEMOTO A,KATOH T,et al. Eco Friendly ELID Grinding Using Metal-Free ElectroConductive Resinoid Bonded Wheel[J]. JSME International Journal,2004,47(1):72-78.
文章导航

/

〈 〉