绿色制造工艺和系统

高端金属零件微铸锻铣复合超短流程绿色制造方法及其能耗分析

  • 张海鸥 ,
  • 黄丞 ,
  • 李润声 ,
  • 张华 ,
  • 陈君文 ,
  • 冯抗屯 ,
  • 王桂兰
展开
  • 1. 华中科技大学机械科学与工程学院, 武汉, 430074;
    2. 武汉科技大学冶金装备及其控制教育部重点实验室, 武汉, 430081;
    3. 中航飞机起落架有限责任公司, 长沙, 410200;
    4. 华中科技大学材料科学与工程学院, 武汉, 430074
张海鸥,男,1955年生,教授、博士研究生导师。研究方向为金属增材制造工艺装备及其智能化、材料成形与加工一体化等。E-mail:zholab@hust.edu.cn。

收稿日期: 2018-06-27

  网络出版日期: 2018-11-07

基金资助

华中科技大学自主创新研究基金资助项目(5003100039)

A Super Short-process Green Manufacturing Method and Energy Consumption Analysis of Micro Casting Forging and Milling for High Performance Parts

  • ZHANG Haiou ,
  • HUANG Cheng ,
  • LI Runsheng ,
  • ZHANG Hua ,
  • CHEN Junwen ,
  • FENG Kangtun ,
  • WANG Guilan
Expand
  • 1. School of Mechanical Science and Engineering, Huazhong University of Science and Technology, Wuhan, 430074;
    2. Key Laboratory of Metallurgical Equipment and Control Technology of Ministry of Education, Wuhan University of Science and Technology, Wuhan, 430081;
    3. AVIC Landing Gear Advanced Manufacturing Co., Ltd., Changsha, 410200;
    4. School of Materials Science and Engineering, Huazhong University of Science and Technology, Wuhan, 430074

Received date: 2018-06-27

  Online published: 2018-11-07

摘要

基于绿色设计体系结构分析了绿色设计制造理念在增材制造技术中的体现,针对高端金属零件传统制造工艺流程长与能耗高这两个瓶颈问题,提出一种金属零件微铸锻铣复合超短流程绿色制造方法,并以一航空起落架外筒零件的制造过程为例,通过理论计算比较了新方法与传统方法的能源和材料消耗。研究结果表明:制造该外筒零件,传统制造方法与微铸锻铣复合制造方法相比,前者的能耗是后者的33.3倍,前者的材料消耗为后者的6.7倍,后者的生产周期由数月缩短为数天。该方法的提出,为我国大型复杂锻件的生产提供了一种超短流程、节能省材的绿色制造新模式。

本文引用格式

张海鸥 , 黄丞 , 李润声 , 张华 , 陈君文 , 冯抗屯 , 王桂兰 . 高端金属零件微铸锻铣复合超短流程绿色制造方法及其能耗分析[J]. 中国机械工程, 2018 , 29(21) : 2553 -2558 . DOI: 10.3969/j.issn.1004-132X.2018.21.006

Abstract

Firstly the idea of green design was introduced and applications in additive manufacturing were presented. Aiming at the bottlenecks of long process and high energy consumption of traditional manufacturing methods to make forgings parts with high performance, and a green manufacturing technology was proposed to make forging parts with ultra-short process hybrid micro casting forging and milling technology. Finally, taking an aero-engine forging part as an example, the calculation results show that the energy consumption of the traditional manufacturing method is 33.3 times of the energy consumption of micro casting forging and milling, and material consumption is 6.7 times of the micro casting forging and milling technology. Micro casting forging and milling provides a green material and energy saving manufacturing way with innovative ultra-short process to manufacture large complex forgings in China.

参考文献

[1] 刘光复. 绿色设计与绿色制造[M]. 北京:机械工业出版社, 1999. LIU Guangfu. Green Design and Green Manufacturing[M]. Beijing:China Machine Press,1999.
[2] GRIHON S, KROG L, TUCKER A, et al. A380 Weight Savings Using Numerical Structural Optimization[C]//20th AAAF Colloquium on Material for Aerospace Applications, Paris. 2004:763-766.
[3] 黄卫东. 材料3D打印技术的研究进展[J]. 新型工业化, 2016, 6(3):53-70. HUANG Weidong. Research Progress of Material 3D Printing Technology[J]. New Industrialization, 2016, 6(3):53-70.
[4] 张海鸥, 向鹏洋, 芮道满,等. 金属零件增量复合制造技术[J]. 航空制造技术, 2015, 479(10):34-36. ZHANG Haiou, XIANG Pengyang, RUI Daoman, et al. Incremental Composite Manufacturing Technology for Metal Parts[J]. Aeronautical Manufacturing Technology, 2015, 479(10):34-36.
[5] 柳建国, 黄天佑, 卢定全,等. "十二五"中国铸造行业发展浅析[J]. 铸造技术, 2012, 33(9):80-83. LIU Jianguo, HUANG Tianyou, LU Dingquan, et al. A Brief Analysis of the Development of China's Foundry Industry in 12th Five-year[J]. Casting Technology, 2012, 33(9):80-83.
[6] LI Yuanyuan, CHEN Weiping, HUANG Dan, et al. Energy Conservation and Emissions Reduction Strategies in Foundry Industry[J]. China Foundry, 2010, 7(4):392-399.
[7] ZHANG H O, RUI W, LIANG L, et al. HDMR Technology for the Aircraft Metal Part[J]. Rapid Prototyping Journal, 2016, 22(6):857-863.
[8] 王桂兰, 符友恒, 梁立业,等. 电弧微铸轧复合增材新方法制造高强度钢零件[J]. 热加工工艺, 2015, 44(13):24-26. WANG Guilan, FU Youheng, LIANG Liye, et al. New Method of Arc Micro Casting and Rolling to Produce High Strength Steel Parts[J]. Heat Process, 2015, 44(13):24-26.
[9] 陈维平. 我国铸造行业与节能减排[J]. 机电工程技术, 2013(6):1-6. CHEN Weiping. China's Foundry Industry and Energy Saving and Emission Reduction[J]. Mechanical and Electrical Engineering Technology, 2013(6):1-6.
[10] Carbon Trust. Industrial Energy Efficiency Accelerator-guide to the Metalforming Sector[EB/OL]. (2014-06-08)[2018-10-23]. https://www.carbontrust.com/media/206500/ctg062-metalforming-industrial-energy-efficiency.pdf.
[11] HE Y, LIU F, WU T, et al. Analysis and Estimation of Energy Consumption for Numerical Control Machining[J]. Proc. Inst. Mech. Eng. Part B, J. Eng. Manuf., 2012, 226(B2):255-266.
[12] LI W, KARA S. An Empirical Model for Predicting Energy Consumption of Manufacturing Processes:a Case of Turning Process[J]. Proc. Inst. Mech. Eng. Part B, J. Eng. Manuf., 2011, 225(B9):1636-1646.
文章导航

/

〈 〉