复合挤压在铝合金轮毂成形中的应用研究

王强, 孟模, 房庆龄, 张治民

塑性工程学报 ›› 2020, Vol. 27 ›› Issue (12) : 18-23.

PDF(4852 KB)
PDF(4852 KB)
塑性工程学报 ›› 2020, Vol. 27 ›› Issue (12) : 18-23. DOI: 10.3969/j.issn.1007-2012.2020.12.003
塑性成形技术与工艺

复合挤压在铝合金轮毂成形中的应用研究

  • 王强, 孟模, 房庆龄, 张治民
作者信息 +

Application of compound extrusion in aluminum alloy wheel hub forming

  • WANG Qiang, MENG Mu, FANG Qing-ling, ZHANG Zhi-min
Author information +
文章历史 +

摘要

在正向-反向-径向复合挤压及其金属流动行为研究的基础上,围绕重型车辆传统钢制轮毂难以减重的问题,针对轮毂结构、服役要求以及复合挤压成形的特点,提出了铝合金轮毂正向-反向-径向复合挤压成形新方法,结合数值模拟和实验研究,分析了坯料尺寸、摩擦因子以及模具圆角半径等工艺参数对等效应变的影响。控制了金属的有序定向流动,提高了挤压变形均匀性,缩短了成形工艺流程,实现了某铝合金轮毂的挤压成形,相较传统钢制轮毂减重达60%,为重型车辆轻量化提供了新途径。

Abstract

Based on the study of forward-backward-radial compound extrusion and its metal flow behavior, aiming at the problem that the traditional steel wheel hub for heavy vehicle was difficult to reduce weight, combined with the structure of wheel hub, service requirements and the characteristics of compound extrusion forming, a new forward-backward-radial compound extrusion forming method for aluminum alloy wheel hub was proposed. Combining with the numerical simulation and experimental study,the influence of process parameters such as billet size, friction coefficient and die fillet radius on equivalent strain was analyzed. The ordered and directional flow of metal is controlled. The uniformity of extrusion deformation is greatly improved and the extrusion forming process is shortened. The extrusion forming of aluminum alloy wheel hub is realized, and compared with traditional steel wheel hub, the weight is reduced by 60%, which provides a new path for the lightweight of heavy vehicles.

关键词

复合挤压 / 铝合金轮毂 / 金属流动 / 变形均匀性

Key words

compound extrusion / aluminum alloy wheel hub / metal flow / deformation uniformity

引用本文

导出引用
王强, 孟模, 房庆龄, 张治民. 复合挤压在铝合金轮毂成形中的应用研究[J]. 塑性工程学报, 2020, 27(12): 18-23 https://doi.org/10.3969/j.issn.1007-2012.2020.12.003
WANG Qiang, MENG Mu, FANG Qing-ling, ZHANG Zhi-min. Application of compound extrusion in aluminum alloy wheel hub forming[J]. Journal of Plasticity Engineering, 2020, 27(12): 18-23 https://doi.org/10.3969/j.issn.1007-2012.2020.12.003

参考文献

[1] 夏亚东, 张宝红,于建民,等. 5A06 铝合金复杂构件的复合挤压成形工艺[J].锻压技术,2018,43(1):66-71. XIA Yadong,ZHANG Baohong,YU Jianmin,et al. Compound extrusion forming process of complex components for aluminum alloy 5A06[J]. Forging & Stamping Technology,2018,43(1):66-71.
[2] HINZ D, KIRCHNER A, BROWN D, et al. Near net shape production of radially oriented NdFeB ring magnets by backward extrusion[J]. J. Mater. Process Technol., 2003,135:358-365.
[3] 陈胜迁, 陈立,宋新华,等.挤压比对Al-7.0Si-1.2Fe -0.3Mg合金热挤压组织和性能的影响[J]. 稀有金属,2019,43(2):128-133. CHEN Shengqian, CHEN Li, SONG Xinhua, et al. Microstructure and properties of Al-7.0Si-1.2Fe-0.3Mg alloy under hot extrusion with different extrusion ratios[J]. Chinese Journal of Rare Metals, 2019,43(2):128-133.
[4] 李子夫, 邓运来,张臻,等.挤压比对Al-0.68Mg-0.60Si合金组织和性能的影响[J].材料工程,2019,47(10):60-67. LI Zifu,DENG Yunlai,ZHANG Zhen, et al. Effect of extrusion ratio on microstructure and properties of Al-0.68Mg-0.60Si alloy[J]. Journal of Materials Engineering, 2019,47(10):60-67.
[5] 毛华杰, 胡俊杰, 刘艳雄,等. 6061 铝合金复合挤压成形微观组织与力学性能的研究[J].热加工工艺,2018, 47(9):39-42. MAO Huajie, HU Junjie, LIU Yanxiong,et al. Research on microstructure and mechanical properties of 6061 aluminum alloy formed by combined extrusion[J].Hot Working Technology,2018, 47(9):39-42.
[6] 孙见奇, 雷君相,马晓峰. 螺塞复合挤压的材料分配规律研究[J].锻压技术,2013,38(2):65-68. SUN Jianqi,LEI Junxiang, MA Xiaofeng. Research on material distribution law in combined extrusion process of screw plug[J]. Forging & Stamping Technology, 2013,38(2):65-68.
[7] LEE D J, KIM D J, KIM B M. New processes to prevent a flow defect in the combined forward-backward cold extrusion of a piston-pin[J].Journal of Materials Processing Technology, 2003,139(1-3):422-427.
[8] MATSUMOTO R, HAYASHI K, UTSUNOMIYA H. Experimental and numerical analysis of friction in high aspect ratio combined forward-backward extrusion with retreat and advance pulse ram motion on a servo press[J]. Journal of Materials Processing Technology, 2014,214(4):936-944.
[9] CHOI H J, CHOI J H, HWANG B B. The forming characteristics of radial-backward extrusion[J].Journal of Materials Processing Technology, 2001,113(1-3):141-147.
[10] FARHOUMAND A, EBRAHIMI R. Analysis of forward-backward-radial extrusion process[J]. Mater. Des., 2009, 30 (6):2152-2157.
[11] FARHOUMAND A, EBRAHIMI R. Experimental investigation and numerical simulation of plastic flow behavior during forward-backward-radial extrusion process[J]. Prog. Nat. Sci., 2016, 26(6):650-656.
[12] YANG Y B, XIE Z P, ZHANG Z M, et.al. Processing maps for hot deformation of the extruded 7075 aluminum alloy bar:Anisotropy of hot workability[J]. Materials Science and Engineering:A, 2014,528:4312-4317.

基金

国家重点研发计划项目(2016YFB0301103-3)
PDF(4852 KB)

176

Accesses

0

Citation

Detail

段落导航
相关文章

/