[1] 赵麦群, 王伟科, 张 颢, 等. 稀土改性42CrMoS易切削钢中的硫化物夹杂分析[J]. 金属热处理, 2004, 29(11): 20-23. Zhao Maiqun, Wang Weike, Zhang Hao, et al. Analysis on sulphide inclusions in free-cutting 42CrMoS steel modified by rare earth elements[J]. Heat Treatment of Metals, 2004, 29(11): 20-23.
[2] 王金龙, 乔爱云, 张行刚. 含硫易切削钢切削性机理与硫化物控制简述[J]. 包钢科技, 2015, 41(1): 30-32. Wang Jinlong, Qiao Aiyun, Zhang Xinggang. Summary on mechanical of machinability and control of sulfide for sulphur free-cutting steel[J]. Science and Technology of Baotou Steel, 2015, 41(1): 30-32.
[3] 王小红, 谢 兵, 冯仲渝. 国内外易切削钢的现状和研究进展[J]. 特殊钢, 2005, 26(4): 26-28. Wang Xiaohong, Xie Bing, Feng Zhongyu. Present status and development of research on free cutting steel at home and abroad[J]. Special Steel, 2005, 26(4): 26-28.
[4] Lo K H, Shek C H, Lai J K L. Recent development in stainless steels[J]. Materials Science and Engineering Reports, 2009, 65(4-6): 39-104.
[5] 李代钟. 钢中硫化物夹杂物球化和对钢性能的影响[J]. 钢铁研究学报, 1992, 4(2): 97-101. Li Daizhong. Globularzing of sulfide inclusions and its influence on the properties of steel[J]. Journal of Iron and Steel Research, 1992, 4(2): 97-101.
[6] Takada H, Bessho I, Ito T. Effect of sulfur content and solidification variables on morphology and distribution of sulfide in steel ingots[J]. Transactions Iron Steel Institute of Japan, 1978, 18(9): 564-573.
[7] 李梦龙, 王福明, 陶素芬, 等. 易切削非调质钢凝固过程及钢中MnS析出规律[J]. 材料热处理学报, 2014, 35(4): 84-89. Li Menglong, Wang Fuming, Tao Sufen, et al. Solidification process and sulfide precipitation behavior in free-cutting non-quenched and tempered steel[J]. Transactions of Materials and Heat Treatment, 2014, 35(4): 84-89.
[8] 李梦龙, 王福明, 李茂旺, 等. S含量对中碳非调质钢拉伸性能的影响[J]. 金属热处理, 2015, 40(5): 1-5. Li Menglong, Wang Fuming, Li Maowang, et al. Effect of sulfur content on tensile property of medium carbon non-quenched and tempered steels[J]. Heat Treatment of Metals, 2015, 40(5): 1-5.
[9] 张雨蕾, 卓 超, 郝晓帅, 等. 硫含量对重轨钢中非金属夹杂物的影响[J]. 钢铁研究学报, 2022, 34(8): 799-806. Zhang Yulei, Zhuo Chao, Hao Xiaoshuai, et al. Effect of sulfur content on the non-metallic inclusion of heavy rail steel[J]. Journal of Iron and Steel Research, 2022, 34(8): 799-806.
[10] 邓振强, 刘建华, 何 杨, 等. FeCrAl不锈钢的平衡凝固相变与析出行为[J]. 工程科学学报, 2017, 39(5): 71-81. Deng Zhenqiang, Liu Jianhua, He Yang, et al. Phase transformations and precipitation behavior in FeCrAl stainless steel during equilibrium solidification[J]. Chinese Journal of Engineering, 2017, 39(5): 71-81.
[11] 朱强斌, 李 杰, 邓向阳, 等. 镁系易切削钢中夹杂物分析[J]. 钢铁钒钛, 2021, 42(2): 179-192. Zhu Qiangbin, Li Jie, Deng Xiangyang, et al. Inclusion analysis in magnesium free-cutting steel[J]. Iron Steel Vanadium Titanium, 2021, 42(2): 179-192.
[12] Ito Y, Matsubara N, Matsubara K. Formation of manganese sulfide in steel[J]. Transactions of the Iron and Steel Institute of Japan, 1981, 21(7): 477-484.
[13] Ito Y, Yonezawa N, Matsubara K. Formation of manganese sulfide in low carbon steel[J]. Tetsu-to Hagane, 1982, 68(10): 1569-1577.
[14] Takada H, Bessho I, Ito T. Effect of sulfur content and solidification variables on morphology and distribution of sulfide in steel ingots[J]. The Iron and Steel Institute of Japan, 1978, 18(6): 564-572.
[15] Hashimura M, Mizuno A, Miyanishi K. Effect of MnS distribution on machinability in low- carbon free-cutting steel[J]. Iron and Steel Technology, 2009, 6(9): 45-51.
[16] Luyckx L A, Bell J R, Mclean A, et al. Sulfide shape control in high strength low alloy steels[J]. Metallurgical Transactions, 1970, 1(12), 3341-3350.
[17] 张海霞, 梁 娜, 翟正龙, 等. 易切削钢中硫化物形态的研究[J]. 冶金丛刊, 2011(6): 49-51. Zhang Haixia, Liang Na, Zhai Zhenglong, et al. Research on the sulfide from of free cutting steel[J]. Metallurgical Collections, 2011(6): 49-51.
[18] 钟群鹏, 赵子华.断口学[M]. 北京: 高等教育出版社, 2006: 1-10.
[19] Hosseini S B, Temmel C, Karlsson B, et al. An in-situ scanning electron microscopy study of the bonding between MnS inclusions and the matrix during tensile deformation of hot-rolled steels[J]. Metallurgical and Materials Transactions A, 2007, 38(5): 982-989.
[20] 李梦龙, 王福明, 李长荣, 等. 原位观察MnS对非调质钢拉伸性能各向异性的影响[J]. 工程科学学报, 2016, 38(9): 1258-1263. Li Menglong, Wang Fuming, Li Changrong, et al. In-situ observation of MnS effect on the tensile strength anisotropy of non-quenched and tempered steel[J]. Chinese Journal of Engineering, 2016, 38(9): 1258-1263.