基于视觉定位的轴承在线快速检测系统

doi:10.3969/j.issn.1001-3881.2017.10.042

PDF(1652 KB)

机床与液压 ›› 2017, Vol. 45 ›› Issue (10) : 162-164,169. DOI: 10.3969/j.issn.1001-3881.2017.10.042

扫码查看或转发全文

控制与检测

基于视觉定位的轴承在线快速检测系统

白芳¹, 乔荣福²

作者信息 +

On-line Rapid Positioning Bearing Detection System Basedon Machine Vision

BAI Fang¹, QIAO Rongfu²

Author information +

文章历史 +

摘要

利用视觉技术快速灵活的特点，结合激光检测的准确性，针对精密轴承的生产线进行快速定位在线检测。将面阵相机与工业激光传感器相结合，实现轴承在线生产中的质量检测，完成多点位的质量缺陷检测与尺寸加工精度检测。建立一整套自动化检测系统，实现了快速定位、表面缺陷检测与多位置尺寸测量。同时发挥视觉检测与激光检测的优点，实现了高速度、高效率、高精度的在线检测。

Abstract

Combining machine vision and laser measurement technology together, the fast on-line detection for the production line of precision bearing was accomplished. The quality inspection of the bearing on-line production was realized by using the combination of array camera and the industrial laser sensor, and the quality defects detection and the size accuracy measurement were finished. A complete set of automatic detection system was established which could be used to achieve fast positioning, surface defect detection and multi position measurement. At the same time, it has the advantages of visual detection and laser detection by which on-line detection with high speed, high efficiency and high precision was realized.

导出引用

白芳, 乔荣福. 基于视觉定位的轴承在线快速检测系统[J]. 机床与液压, 2017, 45(10): 162-164,169 https://doi.org/10.3969/j.issn.1001-3881.2017.10.042

BAI Fang, QIAO Rongfu. On-line Rapid Positioning Bearing Detection System Basedon Machine Vision[J]. Machine Tool & Hydraulics, 2017, 45(10): 162-164,169 https://doi.org/10.3969/j.issn.1001-3881.2017.10.042

参考文献

[1] 孙丽燕,袁柳杰,郭锋.机器视觉系统及其在链条行业中的应用[J].机械传动,2013,37(6):113-115. SUN L Y,YUAN L J,GUO F.Application of Machine Vi-sion System in Chain Industry[J]. Journal of Mechanical Transmission,2013,37(6):113-115.
[2] 郑新.基于EMD与PCA分析的滚动轴承故障特征研究[J].机械传动,2016,40(1):54-63. ZHENG X.Fault Feature Research of Rolling Bearing Based on Empirical Mode Decomposition and Principle Compo-nent Analysis[J]. Journal of Mechanical Transmission, 2016.40(1):54-63.
[3] 孙伟,韩建海,赵书尚,等.基于机器视觉的轴承内径亚像素在线检测[J].轴承,2007(3):32-34. SUN W,HAN J H,ZHAO S S,et al.A Subpixel On-line In-spection Technology for Bore Diameter of Bearing Based on Machine Vision[J].Bearing,2007(3):32-34.
[4] GAMAGE P,XIE S Q.A real-time Vision System for Defect Inspection in Cast Extrusion Manufacturing Process[J]. The International Journal of Advanced Manufacturing Tech-nology,2009,40(1):144-156.
[5] 张新华,许增朴,王永强.基于激光测距的非接触式齿轮倒角轮廓测量系统[D].天津:天津科技大学,2011.
[6] 马龙.白光扫描干涉测量方法与系统的研究[D].天津:天津大学,2011.
[7] HU Z,BICKER R,TAYLOR P,et al. Computer Vision for Shoe Upper Profile Measurement via Upper and Sole Con-formal Matching[J].Optics&Lasers in Engineering,2007, 45(1):183-190.
[8] CHEN X,TANG Z,YANG Y,et al.A New Classic Camera Calibration Method Based on Coplanar Points[C]//2009 Chinese Control and Decision Conference. Guilin, 2009:4481-4485.
[9] MACDONALD J R. Comparison and Application of Two Methods for the Least Squares Analysis of Immittance Data[J].Solid State Ionics,1992,58(1/2):97-107.