Fiber-diode laser hybrid welding technology, which adequately combines the superiorities of both fiber and diode laser heat source, has great potential in the field of laser processing. In this paper, fiber-diode laser hybrid welding experiments were conducted for the 2195 Al-Li alloy. The effect of laser power on morphology and porosity was quantitatively investigated. The results show that fiber laser power has a significantly impact on the weld depth, while diode laser power has a significantly influence on the upper weld width. The regression model for predicting the cross-sectional area of weld seam was obtained. Besides, both fiber and diode laser play an important role in the control of porosity defects. The higher power of fiber laser is beneficial to reduce porosity. For 2195 Al-Li alloy with the thickness of 4mm, the high-temperature molten pool and large range of fiber-diode laser action region are formed at the fiber laser power of 3.0 kW and diode laser power between 2.5 kW and 3.0 kW, which results in the welded joint with the less porosity.
ZHAO Yanqiu
,
LI Xiang
,
LIU Zhiqiang
,
YAN Tingyan
,
WANG Leilei
,
ZHAN Xiaohong
. Effect of laser power on the morphology and porosity for 2195 Al-Li alloy fabricated by fiber-diode laser hybrid welding[J]. Transactions of The China Welding Institution, 2023
, 44(1)
: 99
-106
.
DOI: 10.12073/j.hjxb.20220225001
[1] 罗传光, 李桓, 于福盛, 等. 2195-F态铝锂合金TIG焊和FSW焊后残余应力分析[J]. 焊接学报, 2018, 39(11): 43 - 47
Luo Chuanguang, Li Huan, Yu Fusheng, et al. Residual stress analysis of 2195-F state aluminum lithium alloy after TIG welding and FSW[J]. Transactions of The China Welding Institution, 2018, 39(11): 43 - 47
[2] 熊焕. 低温贮箱及铝锂合金的应用[J]. 导弹与航天运载技术, 2001(6): 33 - 40
Xiong Huan. Cryogenic tank and application of aluminum lithium alloy[J]. Missiles and Space Vehicles, 2001(6): 33 - 40
[3] 马云龙, 杨子奇, 李劲风. 2195铝锂合金摩擦搅拌焊接头组织与腐蚀行为[J]. 焊接学报, 2019, 40(10): 142 - 147
Ma Yunlong, Yang Ziqi, Li Jinfeng. Structure and corrosion behavior of friction stir weld joint of 2195 Al-Li alloy[J]. Transactions of The China Welding Institution, 2019, 40(10): 142 - 147
[4] 张新瑞. 2195铝锂合金激光选区熔化成形及裂纹缺陷调控[D]. 哈尔滨: 哈尔滨工业大学, 2020.
Zhang Xinrui. Selective laser melting of AA2195 Al-Li alloy and crack defect control[D]. Harbin: Harbin Institute of Technology, 2020.
[5] Zhao H, White D. R., DebRoy T Current issues and problems in laser welding of automotive aluminium alloys[J]. International Materials Reviews, 1999, 44(6): 238 - 266.
[6] Dittrich D, Standfuss J, Liebscher J, et al. Laser beam welding of hard to weld Al alloys for a regional aircraft fuselage design – first results[J]. Physics Procedia, 2011, 12: 113 - 122.
[7] 韩晓辉, 马寅, 马国龙, 等. 双光束激光焊匙孔动态特征分析[J]. 焊接学报, 2020, 41(2): 93 - 96
Han Xiaohui, Ma Yin, Ma Guolong, et al. Dynamic characteristic analysis of keyhole in double beam laser welding[J]. Transactions of the China Welding Institution, 2020, 41(2): 93 - 96
[8] 常云峰, 雷振, 王旭友, 等. 2A14铝合金激光-MIG复合填丝焊特性分析[J]. 焊接学报, 2017, 38(7): 40 - 44
Chang Yunfeng, Lei Zhen, Wang Xuyou, et al. Process of laser-MIG hybrid welding of 2A14 aluminum alloy with filler wire[J]. Transactions of the China Welding Institution, 2017, 38(7): 40 - 44
[9] Bagger Claus, Olsen Flemming O. Review of laser hybrid welding[J]. Journal of Laser Applications, 2005, 17(1): 2 - 14.
[10] Mahrle A, Beyer E. Hybrid laser beam welding—Classification, characteristics, and applications[J]. Journal of Laser Applications, 2006, 18(3): 169 - 180.
[11] Kronthaler M R, Braunreuther S, Zaeh M. F. Bifocal hybrid laser welding -more than a superposition of two processes[J]. Physics Procedia, 2011, 12: 208 - 214.
[12] Witzendorff P. , Hermsdorf J., Kaierle S., et al. Double pulse laser welding of 6082 aluminium alloys[J]. Science and Technology of Welding and Joining, 2015, 20(1): 42 - 47.
[13] 杨璟. 铝合金激光深熔焊接过程行为与缺陷控制研究[D]. 北京: 北京工业大学, 2011.
Yang Jing. Study on the process behavior and defects control during laser deep penetration welding of aluminium alloy[D]. Beijing: Beijing University of Technology, 2011.
[14] 杨海锋, 王旭友, 王威, 等. 铝合金双光束激光焊接过程稳定性分析[J]. 焊接学报, 2016, 37(6): 13 - 18
Yang Haifeng, Wang Xuyou, Wang Wei, et al. Process stability analysis of double beam laser welding of aluminum alloy[J]. Transactions of the China Welding Institution, 2016, 37(6): 13 - 18
[15] 朱宝华, 李小婷, 丁凯强. 半导体-光纤激光复合焊接铝合金研究[J]. 应用激光, 2018, 38(4): 587 - 590
Zhu Baohua, Li Xiaoting, Ding Kaiqiang. Research on hybrid diode-fiber laser welding for qluminum alloy[J]. Applied Laser, 2018, 38(4): 587 - 590
