[1] 安瑞金, 赵琳, 田志凌, 等. 医疗器械用高氮不锈钢薄板激光焊接接头的组织与性能[J]. 应用激光, 2007, 27(6): 41-44
An Ruijin, Zhao Lin, Tian Zhiling, et al. Microstructure and mechanical properties of welded joint of high nitrogen austenite stainless steel thin plates for medical devices[J]. Applied Laser, 2007, 27(6): 41-44
[2] Svyazhin A, Kaputkina L, Smarygina I, et al. Nitrogen steels and high-nitrogen steels: industrial technologies and properties[J]. Steel Research International, 2022, 93(9): 2200160.
[3] Radice S, Impergre A, Fischer A, et al. Corrosion resistance of the nickel‐free high‐nitrogen steel FeCrMnMoN0.9 under simulated inflammatory conditions[J]. Journal of Biomedical Materials Research Part B:Applied Biomaterials, 2021, 109(6): 902-910.
[4] Li S, Zhang C S, Lu J P, et al. A review of progress on high nitrogen austenitic stainless-steel research[J]. Materials Express, 2021, 11(12): 1901-1925.
[5] Li M, Wu H, Wang Y, et al. Immobilization of heparin/poly-L-lysine microspheres on medical grade high nitrogen nickel-free austenitic stainless steel surface to improve the biocompatibility and suppress thrombosis[J]. Materials Science and Engineering:C, 2017, 73: 198-205.
[6] Lang Y P, Qu H P, Chen H T, et al. Research progress and development tendency of nitrogen-alloyed austenitic stainless steels[J]. Journal of Iron and Steel Research International, 2015, 22(2): 91-98.
[7] Li J, Li H, Peng W, et al. Effect of simulated welding thermal cycles on microstructure and mechanical properties of coarse-grain heat-affected zone of high nitrogen austenitic stainless steel[J]. Materials Characterization, 2019, 149: 206-217.
[8] Qin Y, Li J, Herbig M. Microstructural origin of the outstanding durability of the high nitrogen bearing steel X30CrMoN15-1[J]. Materials Characterization, 2020, 159: 110049.
[9] Zhao Y, Sun Y, Li X, et al. In-situ observation of δ ? γ phase transformations in duplex stainless steel containing different nitrogen contents[J]. ISIJ International, 2017, 57(9): 1637-1644.
[10] 汤旭炜. Mn18Cr18N护环钢工艺的基础研究[D]. 北京: 北京科技大学, 2017.
Tang Xuwei. Fundamental study on process of Mn18Cr18N retaining ring steel[D]. Beijing: University of Science and Technology Beijing, 2017.
[11] 孙世成. 高氮无镍奥氏体不锈钢的微观结构和力学性能研究[D]. 吉林: 吉林大学, 2014.
Sun Shicheng. Microstructure and mechanical properties of high nitrogen nickel-free austenitic stainless steel[D]. Jilin: Jilin University, 2014.
[12] Tan H, Jiang Y, Deng B, et al. Effect of annealing temperature on the pitting corrosion resistance of super duplex stainless steel UNS S32750[J]. Materials Characterization, 2009, 60(9): 1049-1054.
[13] Ma Z H, Chen D G, Liu H W, et al. Microstructure and mechanical properties of welding joints of high nitrogen steel by hybrid laser-arc welding[J]. Applied Mechanics and Materials, 2014, 496: 444-447.
[14] Wang L, Li Y, Ding J, et al. Problems in welding of high nitrogen steel: A Review[J]. Metals, 2022, 12(8): 1273.
[15] 张志强, 荆洪阳, 徐连勇, 等. 铁素体/奥氏体双相不锈钢焊接接头组织和性能的研究进展[J]. 材料热处理学报, 2020, 41(5): 13-27
Zhang Zhiqiang, Jing Hongyang, Xu Lianyong, et al. Research progress on microstructure and properties of welded joint of ferrite/austenite duplex stainless steel[J]. Transactions of Materials and Heat Treatment, 2020, 41(5): 13-27
[16] Zhao L, Tian Z L, Peng Y, et al. Control of nitrogen content and porosity in gas tungsten arc welding of high nitrogen steel[J]. Science and Technology of Welding and Joining, 2009, 14(1): 87-92.
[17] Lu S, Dong W, Li D, et al. Numerical study and comparisons of gas tungsten arc properties between argon and nitrogen[J]. Computational Materials Science, 2009, 45(2): 327-335.
[18] Hosseini V A, Wessman S, Hurtig K, et al. Nitrogen loss and effects on microstructure in multipass TIG welding of a super duplex stainless steel[J]. Materials & Design, 2016, 98: 88-97.
[19] 周杰, 张明渝, 李志洋, 等. 高氮不锈钢与675高强钢焊接接头微观组织与力学性能[J]. 焊接, 2022(2): 6-10
Zhou Jie, Zhang Mingyu, Li Zhiyang, et al. Microstructure and mechanical properties of welded joint between high nitrogen stainless steel and 675 high strength steel[J]. Welding & Joining, 2022(2): 6-10
[20] 杨武林, 陈东高, 王有祁, 等. 中厚度高氮钢双丝MIG焊接头组织和性能研究[J]. 兵器材料科学与工程, 2013, 36(5): 100-102
Yang Wulin, Chen Donggao, Wang Youqi, et al. Microstructure and mechanical properties of MIG welded joint of mid-thickness high nitrogen steel[J]. Ordnance Material Science and Engineering, 2013, 36(5): 100-102
[21] Li J G, Li H, Liang Y, et al. The microstructure and mechanical properties of multi-strand, composite welding-wire welded joints of high nitrogen austenitic stainless steel[J]. Materials, 2019, 12(18): 2944.
[22] 杜挽生, 彭云, 赵琳, 等. 高氮奥氏体不锈钢MIG焊接头的组织和性能[J]. 焊接, 2008(10): 25-29
Du Wansheng, Peng Yun, Zhao Lin, et al. Microstructure and mechanical properties of MIG welded joint of high nitrogen austenite stainless steel[J]. Welding & Joining, 2008(10): 25-29
[23] 明珠, 王克鸿, 张迎迎, 等. 高氮奥氏体钢与603钢焊接结构疲劳性能的对比研究[J]. 焊接技术, 2016, 45(11): 28-30
Ming Zhu, Wang Kehong, Zhang Yingying, et al. Comparative study on fatigue properties of welded structures of high nitrogen austenitic steel and 603 steel[J]. Welding Technology, 2016, 45(11): 28-30
[24] 冯兆龙. 高氮奥氏体不锈钢仰焊焊接接头组织与性能研究[J]. 焊接, 2010(12): 43-45
Feng Zhaolong. Microstructure and properties of high nitrogen stainless steel welded joint by upward welding[J]. Welding & Joining, 2010(12): 43-45
[25] Zhao L, Tian Z L, Peng Y, et al. Porosity and nitrogen content of weld metal in laser welding of high nitrogen austenitic stainless steel[J]. ISIJ international, 2007, 47(12): 1772-1775.
[26] 李永杰. 气孔和裂纹对高氮钢光纤激光焊接接头力学性能的影响[J]. 应用激光, 2017, 37(5): 681-686
Li Yongjie. Effects of air holes and cracks on the mechanical properties of high nitrogen steel fiber laser welded joints[J]. Applied Laser, 2017, 37(5): 681-686
[27] Bai D, Liu F, Zhang H, et al. Corrosion behavior and passivation protection mechanism on different zone of high-nitrogen steel weld[J]. Materials Letters, 2021, 10(1): 300.
[28] Ning J, Na S J, Wang C H, et al. A comparison of laser-metal inert gas hybrid welding and metal inert gas welding of high-nitrogen austenitic stainless steel[J]. Journal of Materials Research and Technology, 2021, 13: 1841-1854.
[29] 方乃文, 黄瑞生, 闫德俊, 等. 低镍含氮奥氏体不锈钢激光-电弧焊电弧特性及组织性能[J]. 焊接学报, 2021, 42(1): 70-75
Fang Naiwen, Huang Ruisheng, Yan Dejun, et al. Effect of welding heatinput on microstructure and properties of MAG welded joint for low nickel high nitrogen austenitic stainless steel[J]. Transactions of the China Welding Institution, 2021, 42(1): 70-75
[30] 王健, 刘天生. 高氮钢与铝板的爆炸焊接可行性探究[J]. 兵器材料科学与工程, 2016, 39(2): 98-102
Wang Jian, Liu Tiansheng. Explosion welding feasibility of high nitrogen steel and aluminum plate[J]. Ordnance Material Science and Engineering, 2016, 39(2): 98-102
[31] Liu Y, Li C, Hu X, et al. Explosive welding of copper to high nitrogen austenitic stainless steel[J]. Metals, 2019, 9(3): 339.
[32] Li H B, Jiang Z H, Feng H, et al. Microstructure, mechanical and corrosion properties of friction stir welded high nitrogen nickel-free austenitic stainless steel[J]. Materials & Design, 2015, 84: 291-299.
[33] Zhang H, Wang D, Xue P, et al. Microstructural evolution and pitting corrosion behavior of friction stir welded joint of high nitrogen stainless steel[J]. Materials & Design, 2016, 110: 802-810.
[34] Zhang H, Wang D, Xue P, et al. Achieving ultra-high strength friction stir welded joints of high nitrogen stainless steel by forced water cooling[J]. Journal of Materials Science & Technology, 2018, 34(11): 2183-2188.
[35] Yuan X J, Kang C Y, Kim M B. Microstructure and XRD analysis of brazing joint for duplex stainless steel using a Ni-Si-B filler metal[J]. Materials Characterization, 2009, 60(9): 923-931.
[36] Zhu W W, Zhang H, Guo C H, et al. Wetting and brazing characteristic of high nitrogen austenitic stainless steel and 316L austenitic stainless steel by Ag-Cu filler[J]. Vacuum, 2019, 166: 97-106.
[37] Qiang W, Wang K H. Shielding gas effects on double-sided synchronous autogenous GTA weldability of high nitrogen austenitic stainless steel[J]. Journal of Materials Processing Technology, 2017, 250: 169-181.
[38] Mohammed R, Reddy G M, Rao K S. Effect of filler wire composition on microstructure and pitting corrosion of nickel free high nitrogen stainless steel GTA Welds[J]. Transactions of the Indian Institute of Metals, 2016, 69(10): 1919-1927.
[39] Liu Z, Fan C, Ming Z, et al. Optimization of shielding gas composition in high nitrogen stainless steel gas metal arc welding[J]. Journal of Manufacturing Processes, 2020, 58: 19-29.
[40] 方乃文, 黄瑞生, 杨义成, 等. 填充金属对08Cr19MnNi3Cu2N低镍含氮奥氏体不锈钢MAG焊接头组织性能的影响[J]. 机械制造文摘(焊接分册), 2019, 6: 20-25
Fang Naiwen, Huang Ruisheng, Yang Yicheng, et al. Effect of filler metal on microstructure and properties of welded joint for 08Cr19MnNi3Cu2N austenitic stainless steel with low nickel and nitrogen[J]. Welding Digest of Machinery Manufacturing, 2019, 6: 20-25
[41] 明珠, 王克鸿, 王伟, 等. 焊丝含氮量及焊接电流对高氮钢焊缝组织和性能影响[J]. 焊接学报, 2019, 40(1): 104-108
Ming Zhu, Wang Kehong, Wang Wei, et al. Effects of nitrogen content and welding current on microstructure and properties of the weld of high nitrogen austenite steel[J]. Transactions of the China Welding Institution, 2019, 40(1): 104-108
[42] Keskitalo M, Mäntyjärvi K, Sundqvist J, et al. Laser welding of duplex stainless steel with nitrogen as shielding gas[J]. Journal of Materials Processing Technology, 2015, 216: 381-384.
[43] Lai R, Cai Y, Wu Y, et al. Influence of absorbed nitrogen on microstructure and corrosion resistance of 2205 duplex stainless steel joint processed by fiber laser welding[J]. Journal of Materials Processing Technology, 2016, 231: 397-405.
[44] 冯志鹏, 刘凤德, 刘双宇, 等. 激光功率对高氮钢激光焊接焊缝组织和性能的影响[J]. 应用激光, 2015, 35(5): 564-568
Feng Zhipeng, Liu Fengde, Liu Shuangyu, et al. Influence of laser power on microstructure and properties of high nitrogen stainless steel with laser welding[J]. Applied Laser, 2015, 35(5): 564-568
[45] Berezovskaya V V, Berezovskiy A V, Hilfi D H. Laser welded joints of high-nitrogen austenitic steels: Microstructure and Properties[J]. Solid State Phenomena, 2018, 284: 344-350.
[46] Cui B, Luo T, Feng M. Effect of nitrogen content on the microstructure and properties of the laser-arc hybrid welding joint of high nitrogen steel[J]. Optik, 2021, 243: 167478.
[47] Li X, Bai D, Wang Y, et al. High-nitrogen steel laser-arc hybrid welding in vibration condition[J]. Materials Science and Technology, 2019, 36(4): 434-442.
[48] Bai D, Yang Z, Chen M, et al. Study on corrosion mechanism of high-nitrogen steel laser-arc hybrid welded joints[J]. Materials Research Express, 2020, 7(10): 106531.
[49] Li H, Yang S, Zhang S, et al. Microstructure evolution and mechanical properties of friction stir welding super-austenitic stainless steel S32654[J]. Materials & Design, 2017, 118: 207-217.
[50] Zhang H, Xue P, Wang D, et al. Effect of heat-input on pitting corrosion behavior of friction stir welded high nitrogen stainless steel[J]. Journal of Materials Science & Technology, 2019, 35(7): 1278-1283.
[51] Du D, Fu R, Li Y, et al. Gradient characteristics and strength matching in friction stir welded joints of Fe-18Cr-16Mn-2Mo-0.85N austenitic stainless steel[J]. Materials Science and Engineering:A, 2014, 616: 246-251.
[52] Zhu W, Jiang H, Zhang H, et al. Microstructure and strength of high nitrogen steel joints brazed with Ni-Cr-B-Si filler[J]. Materials Science and Technology, 2017, 34(8): 926-833.
[53] Wang X X, Li Z F, Gao D, et al. Microstructure and joint properties of high-nitrogen steel brazed by AgCuNi filler metal[J]. International Journal of Modern Physics B, 2022, 36(5): 2250045.
[54] Dong F Y, Zhang P, Pang J C, et al. Microstructure and mechanical properties of high-nitrogen austenitic stainless steels subjected to Equal-Channel angular pressing[J]. Acta Metallurgica Sinica (English Letters), 2016, 29(2): 140-149.
[55] Li J Y, Liu H N, Huang P W. Effects of pre-precipitation of Cr2N on microstructures and properties of high nitrogen stainless steel[J]. Journal of Central South University, 2012, 19(5): 1189-1195.
[56] 马良超, 马冰, 王大锋, 等. 保护气配比对高氮钢焊丝接头组织性能的影响[J]. 兵器材料科学与工程, 2021, 44(1): 59-62
Ma Liangchao, Ma Bing, Wang Dafeng, et al. Effects of shielding gas ratio on microstructure and properties of high nitrogen steel welded joint[J]. Ordnance Material Science and Engineering, 2021, 44(1): 59-62
[57] Liu Z, Fan C L, Ming Z, et al. Gas metal arc welding of high nitrogen stainless steel with Ar-N2-O2 ternary shielding gas[J]. Defence Technology, 2021, 17(3): 923-931.
[58] Ma Y, Lü X, Fang N, et al. Research on microstructure evolution of deposited metal of low nickel high nitrogen austenitic stainless steel[J]. Advances in Materials Science and Engineering, 2021, 2021: 7655423.
[59] Woo I, Kikuchi Y. Weldability of high nitrogen stainless steel[J]. ISIJ International, 2002, 42(12): 1334-1343.
[60] Bo C, Hong Z, Fengde L. Effects of shielding gas composition on the welding stability, microstructure and mechanical properties in laser-arc hybrid welding of high nitrogen steel[J]. Materials Research Express, 2018, 5(9): 096513.
[61] Kumar N, Arora N, Goel S K, et al. A comparative study of microstructure and mechanical properties of 21-4-N steel weld joints using different filler materials[J]. Materials Today:Proceedings, 2018, 5(9): 17089-17096.
[62] Wang J Y, Qi T, Zhong C L, et al. Study on seam nitrogen behavior of high nitrogen steel hybrid welding[J]. Optik, 2021, 242: 167026.
[63] Liu Z, Fan C, Chen C, et al. Design and evaluation of nitrogen-rich welding wires for high nitrogen stainless steel[J]. Journal of Materials Processing Technology, 2021, 288: 116885.
[64] 荆皓, 王克鸿, 强伟, 等. 氮含量对高氮钢PMIG焊接头组织和性能的影响[J]. 焊接学报, 2017, 38(4): 95-98
Jing Hao, Wang Kehong, Qiang Wei, et al. Influence of N-content on microstructure and mechanical properties of PMIG welding joints of high nitrogen steel[J]. Transactions of the China Welding Institution, 2017, 38(4): 95-98
[65] 明珠, 王克鸿, 王伟, 等. 焊丝成分对高氮不锈钢GMAW稳定性及熔滴过渡行为的影响[J]. 焊接学报, 2018, 39(7): 24-28
Ming Zhu, Wang Kehong, Wang Wei, et al. Effect of welding wire compositions on welding process stability and droplet transfer behavior of high nitrogen stainless steel GMAW[J]. Transactions of the China Welding Institution, 2018, 39(7): 24-28
[66] 张旭昀, 郑冰洁, 郭斌, 等. 高氮奥氏体不锈钢中N与Cr、Mn、Mo键合性质研究[J]. 材料导报, 2017, 31(18): 146-149
Zhang Xuyun, Zheng Bingjie, Guo Bin, et al. Theoretical study on bonding characteristics of Cr, Mn, Mo and N in high nitrogen austenitic stainless steel[J]. Materials Review, 2017, 31(18): 146-149
[67] Liu Z, Fan C, Chen C, et al. Optimization of the microstructure and mechanical properties of the high nitrogen stainless steel weld by adding nitrides to the molten pool[J]. Journal of Manufacturing Processes, 2020, 49: 355-364.
[68] Vashishtha H, Taiwade R V, Sharma S, et al. Effect of welding processes on microstructural and mechanical properties of dissimilar weldments between conventional austenitic and high nitrogen austenitic stainless steels[J]. Journal of Manufacturing Processes, 2017, 25: 49-59.
[69] Moon J, Lee T H, Park S J, et al. Tensile deformation behavior and phase transformation in the weld coarse-grained heat-affected zone of metastable high-nitrogen Fe-18Cr-10Mn-N stainless steel[J]. Metallurgical and Materials Transactions A, 2013, 44(7): 3069-3076.
[70] Li J, Li H, Liang Y, et al. Effects of heat input and cooling rate during welding on intergranular corrosion behavior of high nitrogen austenitic stainless steel welded joints[J]. Corrosion Science, 2020, 166: 108445.
[71] 明珠, 王克鸿, 王伟, 等. 冷却速率对高氮钢焊缝组织和性能的影响[J]. 焊接学报, 2019, 40(10): 31-35
Ming Zhu, Wang Kehong, Wang Wei, et al. Effect of cooling rate on the microstructure and mechanical properties of high nitrogen stainless steel weld metal[J]. Transactions of the China Welding Institution, 2019, 40(10): 31-35
[72] 徐娟娟, 王克鸿, 彭勇, 等. 热输入对高氮钢光纤激光焊接接头气孔及组织性能的影响[J]. 造船技术, 2016(1): 55-59,79
Xu Juanjuan, Wang Kehong, Peng Yong, et al. Effect of heat input on stomatal resistance and mechanical properties of high nitrogen steel plate laser welding joint[J]. Marine Technology, 2016(1): 55-59,79
[73] Liu F D, Li X R, Li Y Z, et al. Study of the microstructure and impact properties of the heat-affected zone of high nitrogen steel for laser-arc hybrid welding[J]. Materials Research Express, 2019, 6(7): 076505.
[74] 王力锋, 刘凤德, 刘薇娜, 等. 高氮钢激光-电弧复合焊接接头组织与力学性能研究[C]// 甘肃: 第二十次全国焊接学术会议论文集, 甘肃, 2015: 1-5.
Wang Lifeng, Liu Fengde, Liu Weina, et al. Microstructure and mechanical properties of laser-arc hybrid welded joints of high nitrogen steel [C]. Proceedings of the 20th National Welding Academic Conference, Gansu, 2015: 1-5.
[75] Vashishtha H, Taiwade R V, Sharma S. Effect of electrodes and post weld solution annealing treatment on microstructures, mechanical properties and corrosion resistance of dissimilar high nitrogen austenitic and conventional austenitic stainless steel weldments[J]. Materials Transactions, 2017, 58(2): 182-185.
[76] Kumar N, Arora N, Goel S K. Study on metallurgical and mechanical aspects of GMA welded nitronic steel under the influence of weld quenching[J]. Journal of Manufacturing Processes, 2020, 56: 116-130.
[77] Fang N W, Huang R S, Wang X X, et al. Effect of shielding gas on the microstructure and properties of laser-MAG hybrid welded joint for nickel-saving stainless steel[J]. Advances in Materials Science and Engineering, 2022, 2022: 9330521.
[78] Kumar Rajak D, Pagar D D, Menezes P L, et al. Friction-based welding processes: friction welding and friction stir welding[J]. Journal of Adhesion Science and Technology, 2020, 34(24): 2613-2637.
[79] Miyano Y, Fujii H, Sun Y, et al. Mechanical properties of friction stir butt welds of high nitrogen-containing austenitic stainless steel[J]. Materials Science and Engineering:A, 2011, 528(6): 2917-2921.
[80] Wang D, Ni D R, Xiao B L, et al. Microstructural evolution and mechanical properties of friction stir welded joint of Fe-Cr-Mn-Mo-N austenite stainless steel[J]. Materials & Design, 2014, 64: 355-359.
[81] Hajian M, Abdollah-Zadeh A, Rezaei-Nejad S, et al. Microstructure and mechanical properties of friction stir processed AISI 316L stainless steel[J]. Materials & Design, 2015, 67: 82-94.
[82] 杜东旭. 高氮钢搅拌摩擦焊接接头组织与性能相关性研究[D]. 秦皇岛: 燕山大学, 2014.
Du Dongxu. Investigation on correlation between microstructure and property of friction stir welding joint of high nitrogen steel[D]. Qinhuangdao: Yanshan University, 2014.
[83] 李艺君, 杜东旭, 付瑞东. 焊后热处理对高氮奥氏体不锈钢搅拌摩擦焊接头组织及性能的影响[J]. 机械工程学报, 2015, 51(22): 47-53
Li Yijun, Du Dongxu, Fu Ruidong. Effect of post-welded heat treatment on the microstructures and mechanical properties of friction stir welded joint of high-nitrogen austenitic stainless steel[J]. Journal of Mechanical Engineering, 2015, 51(22): 47-53
[84] Zhang H, Zhu W, Zhang T, et al. Effect of brazing temperature on microstructure and mechanical property of high nitrogen austenitic stainless steel joints brazed with Ni-Cr-P filler[J]. ISIJ International, 2019, 59(2): 300-304.
[85] 任伊宾, 王青川, 邵传伟, 等. 一种血管支架用高氮奥氏体不锈钢及其应用: 中国, 201310150983.2[P]. 2015-06-10.
Ren Yibin, Wang Qingchuan, Shao Chuanwei, et al. A kind of high nitrogen austenitic stainless steel for vascular stent and its application: CN patent, 201310150983.2[P]. 2015-06-10.
[86] 李文, 白树功. 高安全性无镍金属药物洗脱血管支架及其制造方法: 中国, 202010364623.2[P]. 2020-10-30.
Li Wen, Bai Shugong. High safety nickel free metal drug eluting vascular stent and its manufacturing method: CN patent, 202010364623.2[P]. 2020-10-30.
[87] 屈华鹏, 郎宇平, 陈海涛. 无磁钻铤用高氮不锈钢的研究和发展[J]. 热加工工艺, 2014, 43(24): 14-18
Qu Huapeng, Lang Yuping, Chen Haitao. Research and development on high nitrogen stainless steels used for non-magnetic drilling collar[J]. Hot Working Technology, 2014, 43(24): 14-18
[88] 屈华鹏, 郎宇平, 陈海涛. 一种无磁钻铤用高氮奥氏体不锈钢及其制造方法: 中国, 201711244575.8[P]. 2018-04-13.
Qu Huapeng, Lang Yuping, Chen Haitao. A king of high nitrogen austenitic stainless steel for non-magnetic drill collars and the manufacturing method of it: CN patent, 201711244575.8[P]. 2018-04-13.
[89] 秦国梁, 杨帆, 李长安. 高氮奥氏体不锈钢和无磁钻铤的轴向摩擦焊接工艺方法: 中国, 201810746344.5[P]. 2018-11-30.
Qin Guoliang, Yang Fan, Li Changan. Axial friction welding process of high nitrogen austenitic stainless steel and non-magnetic drill collar: CN patent, 201810746344.5[P]. 2018-11-30.
[90] 王宇, 彭翔飞, 李俊, 等. 高氮奥氏体不锈钢强韧化及抗弹性能研究进展[J]. 钢铁, 2022, 57(1): 28-38
Wang Yu, Peng Xiangfei, Li Jun, et al. Research progress on strengthening mechanism and ballistic performance of high nitrogen austenitic stainless steels[J]. Iron Steel, 2022, 57(1): 28-38
[91] 王红鸿, 孟庆润. 一种适用于高氮装甲钢焊接的高氮金属粉芯药芯焊丝: 中国, 201910521297.9[P]. 2019-08-30.
Wang Honghong, Meng Qingrun. A high nitrogen metal powder cored flux cored wire for welding high nitrogen armor steel: CN patent, 201910521297.9[P]. 2019-08-30.
