Combined with the structural characteristics of the composite rod, the Gurney formula considering the influence of plastic work caused by the contraction of the flying tube is derived, and the collision speed of the flying tube is calculated by using this formula. The influence of plastic work generated by the deformation of the flying tube driven by shock wave on the collision speed is explored, and a new grooved flying tube structure is proposed, through which better welding quality can be obtained. The results of theoretical calculation and finite element analysis show that when the gap between the base rod and the flying tube is 3.5 mm, the kinetic energy obtained by the explosive explosion driving the flying tube is completely offset by the plastic deformation, and the collision speed is 0. The theoretical calculation and simulation results are in good agreement. Under the same conditions, the simulation results of the grooved flying tube structure show that the collision speed can reach 667.85 m/s and the collision angle is 13.877°, which meets the requirements of the lower limit collision speed of welding. Based on this, the two-dimensional microscopic simulation analysis results show that the combined interface presents periodic ripples and produces a large number of jets. The temperature at the combined interface exceeds the melting temperatures of the two metals, and the combined interface quality is better.
ZHOU Zhuangzhuang
,
CHEN Fang
. Numerical simulation of explosive welding of composite rod based on grooved structure[J]. Transactions of The China Welding Institution, 2023
, 44(8)
: 41
-48
.
DOI: 10.12073/j.hjxb.20220930001
[1] 代野, 李忠盛, 戴明辉, 等. 钨铜合金与铜扩散连接界面结构及性能研究[J]. 兵器装备工程学报, 2020, 41(10): 170-173
Dai Ye, Li Zhongsheng, Dai Minghui, et al. Microstructure and mechanical properties of diffusion bonding joints between WCu10 and Cu[J]. Journal of Ordnance Equipment Engineering, 2020, 41(10): 170-173
[2] Lehr H F, Wollman E, Koerber G. Experiments with jacketed rods of high fineness ratio[J]. International Journal of Impact Engineering, 1995, 17(4): 517-526.
[3] Li Xinjun, Mo Feng, Wang Xinhong, et al. Numerical study on mechanism of explosive welding[J]. Science and Technology of Welding and Joining, 2012, 17(1): 36-41.
[4] Cartion Erik Peter, Stuivinga Marianne Euphemia Corry. Process for the production of a jacketed penetrator.: EP20060835635[P]. 2008-08-20.
[5] Daichi Moria, Ryuta Kasadaa, Satoshi Konishia, et al. Underwater explosive welding of tungsten to reduced-activation ferritic steel F82H[J]. Fusion Engineering and Design, 2014, 89(7-8): 1086-1090.
[6] Tang Kui, Wang Jinxiang, Chen Xingwang, et al. Penetration characteristics of jacketed rods into semi-infinite steel targets[J]. Explosion and Shock Waves, 2020, 40(5): 87-95.
[7] 吴晓明, 史长根, 房中行, 等. TA2/5083钛铝爆炸焊接数值模拟及实验[J]. 稀有金属材料与工程, 2022, 51(1): 286-294
Wu Xiaoming, Shi Changgen, Fang Zhongxing, et al. Numerical simulation and experiment of TA2/5083 Ti-Al explosive welding[J]. Rare Metal Material and Engineering, 2022, 51(1): 286-294
[8] 曹杰, 贾红新, 武慧恩, 等. 钛-铝薄板爆炸焊接数值模拟[J]. 火工品, 2020(3): 53-56
Cao Jie, Jia Hongxin, Wu Huien, et al. Numerical simulation on explosive welding of Ti/Al plate[J]. Initiators and Pyrotechnics, 2020(3): 53-56
[9] 唐奎, 王金相, 陈兴旺, 等. 夹心弹对半无限钢靶的侵彻特性[J]. 爆炸与冲击, 2020, 40(5): 87-95
Tang Kui, Wang Jinxiang, Chen Xingwang, et al. Penetration characteristics of jacketed rods into semi-infinite steel targets[J]. Explosion and Shock Waves, 2020, 40(5): 87-95
[10] 辛春亮, 朱星宇, 薛再清, 等. 有限元分析常用材料参数手册[M]. 北京: 机械工业出版社, 2022.
Xin Chunliang, Zhu Xingyu, Xu Zaiqing, et al. Handbook of material parameters commonly used in finite element analysis [M]. Beijing: Machinery Industry Press, 2022.
[11] 缪广红, 艾九英, 马雷鸣, 等. 不锈钢/普碳钢双面爆炸复合的数值模拟[J]. 焊接学报, 2020, 41(8): 55-62
Miao Guanghong, Ai Jiuying, Ma Leiming et al. Numerical simulation of double-sided explosive welding of stainless steel/ordinary carbon steel[J]. Transactions of the China Welding Institution, 2020, 41(8): 55-62
[12] 郑远谋. 爆炸焊接和爆炸复合材料[M]. 北京: 国防工业出版社, 2017.
Zheng Yuanmou. Explosive welding and explosive composite material[M]. Beijing: National Defence Industry Press, 2017.
[13] 刘开源. 难熔金属预热爆炸焊接数值模拟及实验研究[D]. 北京: 北京理工大学, 2021.
Liu Kaiyuan. Numerical simulation and experimental investigation on hot explosive welding of refractory metals[M]. Beijing: Beijing Institute of Technology, 2021.
[14] 毕志雄, 李雪交, 吴勇, 等. 钛箔/钢爆炸焊接的界面结合性能[J]. 焊接学报, 2022, 43(4): 81-85
Bi Zhixiong, Li Xuejiao, Wu Yong, et al. Interfacial bonding properties of titanium foil/steel explosive welding[J]. Transactions of the China Welding Institution, 2022, 43(4): 81-85
