Homogeneous specimens of the double-pass laser-arc hybrid welding heat affected zone (HAZ) of low alloy high strength steels were prepared by welding simulation technology, the influence of second peak temperature on the microstructure and toughness of the simulated specimens was investigated. The results showed that the unaltered coarse grained HAZ (UACGHAZ) compose of coarse lath martensite (LM) with an average grain size between 84 − 98 μm. The supercritically reheated CGHAZ (SCRCGHAZ) is comprised of fine LM with an average grain size between 15.7 − 19.2 μm. The intercritically reheated CGHAZ (ICCGHAZ) compose of LM with blocky martensite-austenite constituents distributed along grain boundaries and subgrain boundaries. The subcritically reheated CGHAZ (SRCGHAZ) is comprised of LM with an average grain size between 79 − 88 μm. The instrumented impact test results showed that the ICCGHAZ specimens own the lowest resistance to crack initiation, and the ICCGHAZ and UACGHAZ had the poorest resistance to crack propagation.
BAO Liangliang
,
LIU Fujian
,
XU Yanhong
,
ZHANG Xinming
,
OUYANG kai
,
HAN Tao
. Investigation on microstructure and impact toughness of double-pass laser-arc hybrid welding heat affected zone[J]. Transactions of The China Welding Institution, 2022
, 43(12)
: 90
-99
.
DOI: 10.12073/j.hjxb.20220303001
[1] Cao X, Wanjara P, Huang J, et al. Hybrid fiber laser-arc welding of thick section high strength low alloy steel[J]. Materials & Design, 2011, 32(6):3399-3413.
[2] Kristensen J K. Thick plate CO2-laser based hybrid welding of structural steels[J]. Welding in the World, 2009, 53(1):48-57.
[3] Bunaziv I, Akselsen O, Frostevarg J, et al. Laser-arc hybrid welding of thick HSLA steel[J]. Journal of Materials Processing Technology, 2018, 259:75-87.
[4] Zhang S H, Shen Y F, Qiu H J. The technology and welding joint properties of hybrid laser-TIG welding on thick plate[J]. Optics Laser Technology, 2013, 48:381-388.
[5] Bao Liangliang, Wang Yong, Han Tao. Study on microstructure-toughness relationship in heat affected zone of EQ70 steel by laser-arc hybrid welding[J]. Materials Characterization, 2020, 171:110788.
[6] Li X, Fan Y, Ma X, et al. Influence of Martensite-Austenite constituents formed at different intercritical temperatures on toughness[J]. Materials & Design, 2015, 67:457-463.
[7] Li X, Ma X, Subramanian S V, et al. Structure-property-fracture mechanism correlation in heat-affected zone of X100 ferrite-bainite pipeline steel[J]. Metallurgical & Materials Transactions E, 2015, 2(1):1-11.
[8] Bao Liangliang, Wang Yong, Han Tan. Microstructure and mechanical characterization of high strength low alloy steel welded joint by hybrid laser arc welding[C]//2019 the 7th International Conference on Mechanical Engineering, Materials Science and Civil Engineering, IOP Conference Series:Materials Science and Engineering. 2020, 758:012045.
[9] 鲍亮亮, 王勇, 张洪杰, 等. EQ70钢激光电弧复合焊焊接热循环及其对热影响区组织演变的影响[J]. 焊接学报, 2021, 42(3):26-33
Bao Liangliang, Wang Yong, Zhang Hongjie, et al. Welding thermal cycle of the laser-arc hybrid welding of the EQ70 steel and its effects on the microstructure evolution of the heat affected zone[J]. Transactions of the China Welding Institution, 2021, 42(3):26-33
[10] Han Tao, Zhang Hongjie, Wu Qian, et al. Numerical simulation of 80℃ temperature field distribution of thick plate multi-pass welding with SYSWELD[J]. China Welding, 2018, 21(7):20-25.
[11] 王勇, 王引真, 张德勤. 材料冶金学与成型工艺[M]. 东营:石油大学出版社, 2005.
Wang Yong, Wang Yinzhen, Zhang Deqin. Materials metallurgy and processing[M]. Dongying:Petroleum University Press, 2005.
[12] Kim B C, Lee S, Kim N J, et al. Microstructure and local brittle zone phenomena in high-strength low-alloy steel welds[J]. Metallurgical Transactions A, 1991, 22:139-149.
[13] Hamada M. Control of strength and toughness at the heat affected zone[J]. Welding International, 2003, 17(4):265-270.
[14] 滕彬, 李小宇, 雷振, 等. 低合金高强钢激光-电弧复合热源焊接冷裂纹敏感性分析[J]. 焊接学报, 2010, 31(11):61-64
Teng Bin, Li Xiaoyu, Lei Zhen, et al. Analysis on cold crack sensitivity of low alloy high strength steel weld by laser-arc hybrid welding[J]. Transactions of the China welding institution, 2010, 31(11):61-64
[15] 王振波, 何耀洋, 颜军, 等. 焊接钢榫卯连接装配式混凝土柱抗震性能分析[J]. 南京工业大学学报(自然科学版), 2022, 44(2):187-197
Wang Zhenbo, He Yanyang, Yan Jun, et al. Seismic performance analysis of welded steel mortise and tenon joint assembled concrete columns[J]. Journal of Nanjing Tech University(Natural Science Edition), 2022, 44(2):187-197
[16] 伏玮, 马韩韩, 孔令瑞, 等. 氢对不同回火脆态下2.25Cr-1Mo-0.25V钢母材及焊缝韧脆转变温度的影响[J]. 南京工业大学学报(自然科学版), 2021, 43(6):755-765
Fu Wei, Ma Hanhan, Kong Lingrui, et al. Effects of hydrogen on ductile-brittle transition temperature of 2.25Cr-1Mo-0.25V steel base metal and weld metal under different temper embrittlement states[J]. Journal of Nanjing Tech University(Natural Science Edition, 2021, 43(6):755-765
[17] 鲍亮亮, 潘春宇, 刘福建, 等. 低合金高强钢激光电弧复合焊热模拟热影响区组织与冲击韧性研究[J]. 焊接学报, 2022, 43(5):90-97
Bao Liangliang, Pan Chunyu, Liu Fujian, et al. Research on the HAZ microstructures and toughness of the laser-arc hybrid welding of high strength low alloy steels[J]. Transactions of the China Welding Institution, 2022, 43(5):90-97
