Laser lap deep penetration welding was conducted on Al/steel dissimilar metals with longitudinal alternating magnetic field. Effects of alternating magnetic field on the macro-morphology, microstructure, element distribution, mechanical properties and fracture mode of the joints were carefully investigated using metallographic microscope, scanning electron microscope and other methodologies. The results showed that the weld width decreased and the weld depth increased under applied alternating magnetic field. The electromagnetic force induced by an alternating magnetic field promoted the transformation of resultant IMCs at interface from continuous distribution to discrete distribution. During this process, composition segregation and crack defects were also successfully suppressed. IMCs in interfacial layer may be composed of ζ-FeAl2, θ-FeAl3 and β2-FeAl. Laser welding with applied external magnetic field can improve the loading capacity of the joint. It can attribute to the increase of combined areas and refinement of IMCs structure.
YAN Fei
,
ZHOU Yifan
,
TANG Benkan
,
XU Yonggang
,
WANG Chunming
. Welding characteristics of Al/steel dissimilar metals based on magnetically controlled metallurgy[J]. Transactions of The China Welding Institution, 2022
, 43(5)
: 98
-103
.
DOI: 10.12073/j.hjxb.20220101004
[1] 秦丰, 李睿, 张春波, 等. 铝/钢异种金属轴向摩擦焊研究现状[J]. 材料导报, 2021, 35(21): 21228 ? 21235
Qin Feng, Li Rui, Zhang Chunbo, et al. Research status on axial friction welding of aluminum/steel dissimilar metals[J]. Materials Reports, 2021, 35(21): 21228 ? 21235
[2] Kaushik P, Dwivedi D K. Effect of tool geometry in dissimilar Al-steel friction stir welding[J]. Journal of Manufacturing Processes, 2021, 68: 198 ? 208.
[3] Xu P, Hua X, Shen C, et al. Formation of Fe5Si3 precipitate in the Fe2Al5 intermetallic layer of the Al/steel dissimilar arc welding joint: A transmission electron microscopy (TEM) study[J]. Materials Characterization, 2021, 178: 111236.
[4] Jin Y, Jiahao S, Chenkai G, et al. Effect of heat input on interfacial microstructure, tensile and bending properties of dissimilar Al/steel lap joints by laser welding-brazing[J]. Optics & Laser Technology, 2021, 142: 107218.
[5] Sun H, Yu G, Chen S, et al. Effect of ZnAl filler metals on the characteristics of the joint made by the high-frequency induction brazing of 304 stainless steel and 6A02 aluminum[J]. Journal of Manufacturing Processes, 2021, 68: 961 ? 972.
[6] Xia H, Tao W, Li L, et al. Effect of laser beam models on laser welding–brazing Al to steel[J]. Optics & Laser Technology, 2020, 122: 105845.
[7] Yan F, Fang X, Chen L, et al. Microstructure evolution and phase transition at the interface of steel/Al dissimilar alloys during Nd: YAG laser welding[J]. Optics & Laser Technology, 2018, 108: 193 ? 201.
[8] Su J, Yang J, Li Y, et al. Microstructure and mechanical properties of laser fusion welded Al/steel joints using a Zn-based filler wire[J]. Optics & Laser Technology, 2020, 122: 105882.
[9] 戎易, 程东海, 熊震宇, 等. 交变磁场辅助添加镍中间层镁/钢激光熔钎焊接头的组织性能研究[J]. 中国激光, 2021, 48(22): 2202005
Rong Yi, Cheng Donghai, Xiong Zhenyu, et al. Microstructure and properties of laser welding-brazing welded joint of Mg/steel with Ni interlayer assisted by alternating magnetic field[J]. Chinese Journal of Lasers, 2021, 48(22): 2202005
[10] 丁浩, 徐家乐, 谭文胜, 等. 磁场对激光焊接钢/铝异种金属焊缝性能的影响[J]. 中国激光, 2017, 44(9): 0902003
Ding Hao, Xu Jiale, Tan Wensheng, et al. Influence of magnetic field on properties of Fe/Al dissimilar metal laser welding joints[J]. Chinese Journal of Lasers, 2017, 44(9): 0902003
[11] Zhou J, Zhou D, Liu J. Numerical and experimental investigation of magnesium/aluminum laser welding with magnetic field[J]. The International Journal of Advanced Manufacturing Technology, 2021, 116(1): 545 ? 559.
[12] Bachmann M, Avilov V, Gumenyuk A, et al. About the influence of a steady magnetic field on weld pool dynamics in partial penetration high power laser beam welding of thick aluminium parts[J]. International Journal of Heat and Mass Transfer, 2013, 60: 309 ? 321.
[13] Cao L, Liu D, Jiang P, et al. Multi-physics simulation of dendritic growth in magnetic field assisted solidification[J]. International Journal of Heat and Mass Transfer, 2019, 144: 118673.
[14] 陈纪城, 陈小梅, 常怡婷, 等. 5056 铝合金稳恒磁控激光深熔焊接过程熔池流动与传热行为分析[J]. 焊接学报, 2021, 42(3): 63 ? 69
Chen Jicheng, Chen Xiaomei, Chang Yiting, et al. Material flow behavior during bobbin-tool friction stir welding of aluminum alloy[J]. Transactions of the China Welding Institution, 2021, 42(3): 63 ? 69
[15] Shahverdi H R, Ghomashchi M R, Shabestari S, et al. Microstructural analysis of interfacial reaction between molten aluminium and solid iron[J]. Journal of Materials Processing Technology, 2002, 124(3): 345 ? 352.
[16] Richards R W, Jones R D, Clements P D, et al. Metallurgy of continuous hot dip aluminizing[J]. International Materials Reviews, 1994, 39(5): 191 ? 212.
