By introducing the CMT-P welding method, the welded joints of UNS S32750 super duplex stainless steel with excellent forming quality were successfully prepared. Metallographic microscope, X-ray diffractometer, scanning electron microscope, energy dispersive spectrometer and transmission electron microscope were used to study the microstructure of different regions of the joint. The results showed that the weld, heat-affected zone and base metal structure show significant differences. Compared with the base metal and the weld, the austenite content in the heat-affected zone is the lowest (32.3%), but the austenite content in each micro-zone of the welded joint meets the standard requirement of not less than 30%. Due to the effect of reheating during the welding thermal cycle, intra-grain γ2 and grain boundary γ2 with different scales and morphologies are precipitated in the weld root and heat-affected zone, but there is no γ2 precipitation in the weld filling zone. In addition, short rod-shaped Cr2N precipitated in the weld root and heat-affected zone, which is mainly distributed in the ferrite grains and grain boundaries. The precipitation of Cr2N caused the adjacent ferrite matrix to form an obvious Cr-poor zone.
XU Lianyong
,
BAI Yujie
,
HAN Yongdian
,
JING Hongyang
,
ZHANG Zhiqiang
. Microstructure characteristics of duplex stainless steel CMT-P composite welding[J]. Transactions of The China Welding Institution, 2022
, 43(3)
: 1
-6
.
DOI: 10.12073/j.hjxb.20210821002
[1] 王治宇, 许海刚, 吴玮巍, 等. 2205双相不锈钢的激光-MIG复合焊接头性能[J]. 焊接学报, 2011, 32(2): 109 ? 112, 122
Wang Zhiyu, Xu Haigang, Wu Weiwei, et al. Performance of laser-MIG composite welding joint of 2205 duplex stainless steel[J]. Transactions of the China Welding Institution, 2011, 32(2): 109 ? 112, 122
[2] Alvarez T R, Pavarino M R C, de Souza G C, et al. Influence of interpass temperature on the properties of duplex stainless steel during welding by submerged arc welding process[J]. Welding International, 2016, 30(5): 348 ? 358.
[3] Muthupandi V, BalaSrinivasan P, Shankar V, et al. Effect of nickel and nitrogen addition on the microstructure and mechanical properties of power beam processed duplex stainless steel (UNS 31803) weld metals[J]. Materials Letters, 2005, 59(18): 2305 ? 2309.
[4] 陈庆宏, 吕小青, 徐连勇, 等. P92钢的CMT + P焊接接头组织性能[J]. 焊接学报, 2018, 39(12): 110 ? 114
Chen Qinghong, Lü Xiaoqing, Xu Lianyong, et al. Microstructure and properties of CMT + P welded joints of P92 steel[J]. Transactions of the China Welding Institution, 2018, 39(12): 110 ? 114
[5] Ge J, Wang K, Zhang D, et al. Microstructure characteristics and mechanical properties of steel stud to Al alloy by CMT welding-brazing process[J]. China Welding, 2016, 25(1): 49 ? 56.
[6] Kumar N P, Vendan S A, Shanmugam N S. Investigations on the parametric effects of cold metal transfer process on the microstructural aspects in AA6061[J]. Journal of Alloys and Compounds, 2016, 658: 255 ? 264.
[7] 任思蒙, 刘庆永, 毛晓东, 等. 6082-T6铝合金CMT + P焊与双脉冲MIG焊的接头组织及性能对比分析[J]. 轻合金加工技术, 2019, 47(10): 62 ? 65
Ren Simeng, Liu Qingyong, Mao Xiaodong, et al. Comparative analysis of joint structure and properties of 6082-T6 aluminum alloy CMT + P welding and double pulse MIG welding[J]. Light Alloy Fabrication Technology, 2019, 47(10): 62 ? 65
[8] Zhang Z Q, Jing H Y, Xu L Y, et al. Investigation on microstructure evolution and properties of duplex stainless steel joint multi-pass welded by using different methods[J]. Materials and Design, 2016, 109: 670 ? 685.
[9] Kim S, Jang S, Lee I, et al. Effects of solution heat-treatment and nitrogen in shielding gas on the resistance to pitting corrosion of hyper duplex stainless steel welds[J]. Corrosion Science, 2011, 53(5): 1939 ? 1947.
[10] Garzón C M, Ramirez A J. Growth kinetics of secondary austenite in the welding microstructure of a UNS S32304 duplex stainless steel[J]. Acta Materialia, 2006, 54(12): 3321 ? 3331.
