Braze coating of diamond is an important technical method to improve the surface morphology and properties of materials. Due to the superhard characteristics of diamond, it is difficult to match the properties between diamond and brazing filler metal in braze coated layers. Effect of aluminum powder to nickel-based filler metals on microstructures and wear resistance of induction brazed diamond coating in the atmospheric environment was studied. The results showed that, addition of aluminum can reduce the porosity of the coating and improve its wear resistance due to in-situ formed Al2O3 phases. The deoxidation effect of active aluminum powder in induction braze coating and the wear resistance of in-situ oxide ceramics have been found in this paper. Al2O3 can also refine the microstructure of the brazing filler metals, modify the coating morphology and increase the coating thickness. In addition, it is clarified that the mechanisms of deoxidation of aluminum powder to reduce pores and the enhancement of Al2O3 hard phase to increase hardness and wear resistance.
LONG Weimin
,
LIU Dashuang
,
WANG Bo
,
WU Aiping
,
WANG Decheng
. Effect of aluminum powder on properties of induction braze coated diamond layers in atmospheric environment[J]. Transactions of The China Welding Institution, 2021
, 42(12)
: 67
-71
.
DOI: 10.12073/j.hjxb.20210917002
[1] Pei Xinjun, Liu Wenbin, Cheng Ge, et al. Fabrication of in-situ synthesized ceramic reinforced Ni-based alloy composite coatings by reactive braze coating processing[J]. China Welding, 2019, 28(4): 56 ? 62.
[2] 王星星, 武胜金, 李帅, 等. 功能性钎涂技术的研究进展与应用现状[J]. 中国有色金属学报, 2021, 31(1): 72 ? 83
Wang Xingxing, Wu Shengjin, Li Shuai, et al. Research progress and application status of functional brazed coating technology[J]. The Chinese Journal of Nonferrous Metals, 2021, 31(1): 72 ? 83
[3] Long Weimin, Liu Dashuang, Wu Aiping, et al. Influence of laser scanning speed on the formation property of laser brazing diamond coating[J]. Diamond and Related Materials, 2020, 110: 108085.
[4] 王文琴, 王昭漫, 王德, 等. 单晶高温合金真空钎涂MCrAlY-Cr3C2涂层的研究[J]. 焊接, 2017(12): 41 ? 47
Wang Wenqin, Wang Zhaoman, Wang De, et al. Research on vacuum brazing MCrAlY-Cr3C2 coating on single crystal superalloy[J]. Welding & Joining, 2017(12): 41 ? 47
[5] 龙伟民, 郝庆乐, 傅玉灿, 等. 金刚石工具钎焊用连接材料研究进展[J]. 材料导报, 2020, 34(12): 23138 ? 23144
Long Weimin, Hao Qingle, Fu Yuchan, et al. Research progress of filler metals for brazing diamond tools[J]. Materials Reports, 2020, 34(12): 23138 ? 23144
[6] Liu Dashuang, Long Weimin, Wu Mingfang, et al. Microstructure evolution and lifetime extension mechanism of Sn-added Fe-based pre-alloy brazing coating in diamond tools[J]. Coatings, 2019, 9(6): 364.
[7] Long Weimin, Li Shengnan, Du Dong, et al. Morphological evolution and development trend of brazing materials[J]. Rare Metal Materials and Engineering, 2019, 48(12): 3781 ? 3790.
[8] 刘爱国, 王晓娟, 王微伟. 超高含量球形WC颗粒增强熔敷层的制备与组织分析[J]. 焊接学报, 2021, 42(6): 91 ? 96
Liu Aiguo, Wang Xiaojuan, Wang Weiwei. Preparation and microstructure analysis of cladded layer strengthened by spherical WC particles with very high volume fraction[J]. Transactions of the China Welding Institution, 2021, 42(6): 91 ? 96
[9] 许祥平, 刘驰马, 秋杰, 等. 真空钎焊WC-10Ni/NiCrBSi包覆涂层热疲劳试验工艺研究[J]. 江苏科技大学学报(自然科学版), 2021, 35(3): 30 ? 36
Xu Xiangping, Liu Chima, Qiu Jie, et al. Research of the thermal fatigue test process of vacuum brazing WC-10Ni/NiCrBSi coating[J]. Journal of Jiangsu University of Science and Technology (Natural Science Edition), 2021, 35(3): 30 ? 36
[10] 张启运, 庄鸿寿. 钎焊手册[M]. 3版. 北京: 机械工业出版社, 2018.
Zhang Qiyun, Zhuang Hongshou. Handbook of brazing and soldering [M]. 3 edition. Beijing: China Machine Press, 2018.
[11] 秦建, 龙伟民, 路全彬, 等. 金刚石/NiCrBSi钎涂接头组织与耐磨性能分析[J]. 材料导报, 2020, 34(S2): 1457 ? 1461
Qin Jian, Long Weimin, Lu Quanbin, et al. Microstructure and wear properties of diamond/NiCrBSi composite brazing coating[J]. Materials Reports, 2020, 34(S2): 1457 ? 1461
[12] Liu Dashuang, Wei Ping, Long Weimin, et al. Narrow gap space contributes to chemical metallurgy of self-shielded arc welding[J]. China Welding, 2021, 30(4): 1 ? 8.
[13] Long Weimin, Zhang Guanxing, Zhang Qingke. In situ synthesis of high strength Ag brazing filler metals during induction brazing process[J]. Scripta Materialia, 2016, 110: 41 ? 43.
