In the traditional TIG welding process of 5A03 aluminum alloy, the weld is prone to have the problems of low strength and coarse grains. In order to improve the performance of the 5A03 aluminum alloy weld, on the basis of the traditional TIG welding method, by changing the shielding gas supply Method of butt welding experiment on 5A03 aluminum alloy plate with plate thickness of 2.5 mm. After welding, the welds were subjected to tensile test, fracture morphology analysis, observation with polarized light electron microscope and scanning electron microscope, and electrochemical analysis. The results showed that: compared with the welds obtained by traditional welding, the results obtained by 1 Hz variable gas TIG welding The tensile strength of the weld is increased by 18.5 MPa, and the strength is about 10% of that of the traditional weld. The fracture modes of the two welds are plastic fracture. Comparing the weld grain size, it is found that the weld grains obtained under the 1 Hz variable air supply condition are smaller, and the β-phase Al8Mg5 presents a dispersed morphology distribution on the aluminum substrate; the electrochemical results analysis shows that the self-corrosion current density of the variable air TIG weld Increased, the capacitive arc radius decreases, and the self-corrosion potential moves to the negative half axis by 0.04 V. The corrosion resistance of the traditional welding seam is better.
LI Jichao
,
DAI Hongbin
. Research on the weld performance of 5A03 aluminum alloy with variable gas TIG welding[J]. Transactions of The China Welding Institution, 2021
, 42(10)
: 67
-72
.
DOI: 10.12073/j.hjxb.20201123003
[1] 侯世忠. 汽车用铝合金的研究与应用[J]. 铝加工, 2019(6): 8 ? 13
Hou Shizhong. Research and application of aluminum alloy for automobile[J]. Aluminum Processing, 2019(6): 8 ? 13
[2] 王元良, 周友龙, 胡久富. 铝合金运载工具轻量化及其焊接新技术的发展[J]. 电焊机, 2005(9): 14 ? 18
Wang Yuanliang, Zhou Youlong, Hu Jiufu. Al-alloy lighten vehicle and its development of new welding technology[J]. Electric Welding Machine, 2005(9): 14 ? 18
[3] 晋坤, 孙秀京, 尹苹, 等. 航天用铝合金蒙皮拉形工艺研究[J]. 锻压技术, 2015, 40(8): 47 ? 51
Jin Kun, Sun Xiujing, Yin Ping, et al. Study on stretch forming of aluminum alloy skin for aerospace[J]. Forging Technology, 2015, 40(8): 47 ? 51
[4] 武亚鹏. 铝合金激光焊接工艺及其应用[J]. 金属加工(热加工), 2020(9): 35 ? 37
Wu Yapeng. Aluminum alloy laser welding technology and its application[J]. Metal Processing, 2020(9): 35 ? 37
[5] Zhang Dengkui, Zhao Yue, Dong Mingye, et al. Effects of weld penetration on tensile properties of 2219 aluminum alloy TIG-welded joints[J]. Transactions of Nonferrous Metals Society of China, 2019, 29(6): 1161 ? 1168.
[6] 龚家林, 陈克明, 刘标. 5083铝合金的焊接工艺改进[J]. 焊接技术, 2020, 49(6): 54 ? 56
Gong Jialin, Chen Keming, Liu Biao. Welding process improvements of 5083 aluminum alloy[J]. Welding Technology, 2020, 49(6): 54 ? 56
[7] 陈和. 铝合金船舶建造中的工艺特点初探[J]. 船舶物资与市场, 2020(6): 34 ? 35
Chen He. Preliminary discussion on the technological characteristics of aluminum alloy ship construction[J]. Ship Materials and Market, 2020(6): 34 ? 35
[8] 杨泉. 铝合金焊接技术研究现状及进展[J]. 装备维修技术, 2020(1): 136 ? 137
Yang Quan. Research status and progress of aluminum alloy welding technology[J]. Equipment Maintenance Technology, 2020(1): 136 ? 137
[9] 王燕. 铝合金薄壁壳体焊接件缺陷分析与控制[J]. 金属加工(热加工), 2017(10): 80 ? 82
Wang Yan. Analysis and control of defects in welding parts of aluminum alloy thin-wall shell[J]. Metal Processing, 2017(10): 80 ? 82
[10] 赵双喜, 宋永伦, 张文辉, 等. 脉动送气方式及其电弧现象[J]. 电焊机, 2015, 45(11): 6 ? 9
Zhao Shuangxi, Song Yonglun, Zhang Wenhui, et al. Pulse gas supply mode in TIG welding and its arc phenomena[J]. Electric Welding Machine, 2015, 45(11): 6 ? 9
[11] 刘政军, 苏允海, 罗君, 等. AM50镁合金的TIG焊接性研究[J]. 沈阳工业大学学报, 2007(5): 492 ? 496
Liu Zhengjun, Su Yunhai, Luo Jun, et al. Study on TIG welding performance of AM50 magnesium alloy[J]. Journal of Shenyang University of Technology, 2007(5): 492 ? 496
[12] 路浩, 陶传琦, 邢立伟, 等. 铝合金二元与三元气体保护焊技术比较[J]. 焊接学报, 2014, 35(12): 59 ? 62
Lu Hao, Tao Chuanqi, Xing Liwei, et al. Study on TIG welding performance of AM50 magnesium alloy[J]. Transactions of the China Welding Institution, 2014, 35(12): 59 ? 62
[13] Indra Milyardi, Ario Sunar Baskoro. Effect of current and speed on porosity in autogenous tungsten inert gas (TIG) welding of aluminum alloys A1100 butt joint[J]. International Conference on Materials Engineering and Applications, 2018, 348(1):1−10.
[14] Tazetdinov R G, Novikov O M, Persidskii A S, et al. Arc welding in shielding gases with alternate pulsed supply of dissimilar gases[J]. Welding International, 2013, 27(4): 311-314.
[15] Zhernosekov A M. Combined pulsed effect of shielding gases and welding current in consumable electrode welding[J]. Welding International, 2014, 28(12): 962 ? 965.
[16] Dai Hongbin, Shen Xiuqiang, Wang Haoran. Study on the arc pressure of TIG welding under the condition of Ar-Ar and Ar-He supply alternately[J].Results in Physics 2018, 10: 917-922.
[17] 杨敏杰. 喷射成形7055铝合金型材抗腐蚀性能研究及机理分析[D]. 兰州: 兰州理工大学, 2014.
Yang Minjie. Corrosion resistance research and mechanism analysis of spray-formed 7055 aluminum alloy profile[D]. Lanzhou: Lanzhou University of Technology, 2014.
