Sn58Bi-0.1Er solder alloys with different Ni-CNTs content were prepared by vacuum melting method, and the effect of different Ni-CNTs content on the wettability of Sn58Bi-0.1Er composite solder on Cu substrate were studied. The interface structure morphology of the intermetallic compound at the joint interface and shear properties under different Ni-CNTs content were analyzed. The results show that when the addition of Ni-CNTs reinforcing particles is 0.01wt% ? 0.05wt%, the wettability of the composite solder alloy on the Cu plate is improved, with the further increase of Ni-CNTs content, the wettability of the composite solder on the Cu plate began to show a downward trend. With the addition of Ni-CNTs, the Sn58Bi/Cu interface intermetallic compound transform from serrated Cu6Sn5 to thin layered (Cu, Ni)6Sn5. The addition of Ni-CNTs reinforcing particles can effectively reduce the thickness of the intermetallic compound layer. The addition of Ni-CNTs reinforced particles improves the shear force of the Sn58Bi/Cu joint. When the addition amount of Ni-CNTs is 0.1%, the maximum shear force of the joint is 432.86 N, which is more than twice the shear force of the Sn58Bi-0.1Er solder joint. The addition of Ni-CNTs reinforced particles effectively improves the mechanical properties of the Sn58Bi-0.1Er joint.
LI Qi
,
LIU Fengmei
,
ZHANG Xueyin
,
YI Yaoyong
,
GAO Haitao
,
LI Likun
. Effect of Ni-CNTs reinforced particles on the microstructure and mechanical properties of Sn58Bi-0.1Er solder joints[J]. Transactions of The China Welding Institution, 2021
, 42(7)
: 60
-65
.
DOI: 10.12073/j.hjxb.20201221002
[1] 李正兵, 胡德安, 陈益平, 等. Fe颗粒对时效过程中SnBi/Cu接头组织及性能影响[J]. 焊接学报, 2020, 41(8): 22 ? 28
Li Zhengbing, Hu Dean, Chen Yiping, et al. Effect of Fe particles on the structure and properties of SnBi/Cu joint during aging[J]. Transactions of the China Welding Institution, 2020, 41(8): 22 ? 28
[2] Shen J, Pu Y Y, Yin H G, et al. Effects of minor Cu and Zn additions on the thermal, microstructure and tensile properties of Sn-Bi-based solder alloys[J]. Journal of Alloys and Compounds, 2014, 614(10): 63 ? 70.
[3] Li Y, Chan Y C. Effect of silver (Ag) nanoparticle size on the microstructure and mechanical properties of Sn58Bi-Ag composite solders[J]. Journal of Alloys and Compounds, 2015, 645(5): 566 ? 576.
[4] Suganuma K. Microstructural features of lift-off phenomenon in through-hole circuit soldered by Sn-Bi alloy[J]. Scripta Materialia, 1998, 38(9): 1333 ? 1340.
[5] Chuang T H, Wu H F. Effects of Ce addition on the microstructure and mechanical properties of Sn-58Bi solder joints[J]. Journal of Electronic Materials, 2011, 40(1): 71 ? 77.
[6] 邱希亮, 郝成丽, 修子扬, 等. 石墨烯纳米片对Sn-58Bi钎料显微组织和性能的影响[J]. 焊接学报, 2017, 38 (4): 63 ? 66, 71
Qiu Xiliang, Hao Chengli, Xiu Ziyang, et al. Effect of graphene nanoplates on microstructure and properties of Sn-58Bi solders[J]. Transactions of the China Welding Institution, 2017, 38 (4): 63 ? 66, 71
[7] Yang L, Du C C, Dai J, et al. Effect of nanosized graphite on properties of Sn-Bi solder[J]. Journal of Materials Science: Materials in Electronics, 2013, 24(11): 4180 ? 4185.
[8] Li Q, Wu H, Xiong M, et al. Effect of Er on microstructure and mechanical properties of Sn58Bi based lead-free solder[C]//2020 International Conference on Artificial Intelligence and Electromechanical Automation (AIEA). IEEE, Tianjin, China, 2020: 648-653.
[9] Li Q, Xiong M, Liu F, et al. Effect of Er content on the interfacial microstructure, shear properties and creep properties of Sn58Bi joints[J]. IOP Conference Series: Earth and Environmental Science, 2021, 714(3): 032017.
[10] Gain A K, Zhang L. Growth mechanism of intermetallic compound and mechanical properties of nickel (Ni) nanoparticle doped low melting temperature tin-bismuth (Sn-Bi) solder[J]. Journal of Materials Science Materials in Electronics, 2016, 27: 781 ? 794.
[11] 杨立壮. 镍、镀镍碳纳米管增强 Sn58Bi 无铅焊料微观结构与机械性能的研究[D]. 天津: 天津大学, 2014.
Yang Lizhuang. Microstructure and mechanical properties of Ni and Ni-coated carbon nanotubes reinforced Sn58Bi lead-free solder[D]. Tianjin: Tianjin University, 2014.
[12] 王春青, 李明雨, 田艳红, 等. JIS Z 3198 无铅钎料试验方法简介与评述[J]. 电子工艺技术, 2004, 25(2): 47 ? 54
Wang Chunqing, Li Mingyu, Tian Yanhong, et al. Review JIS Z 3198: Test Method for Lead-free Solder[J]. Electronic Process Technology, 2004, 25(2): 47 ? 54
[13] Yang L, Wei Z, Li X, et al. Effect of Ni and Ni-coated carbon nanotubes on the interfacial reaction and growth behavior of Sn58Bi/Cu intermetallic compound layers[J]. Journal of Materials Science Materials in Electronics, 2016, 27(11): 1 ? 7.
[14] Qi L, Gao H, Xiong M, et al. Effect of Ni-CNTs on microstructure, thermodynamic characteristic and mechanical properties of Sn58Bi-0.1 Er based lead-free solder[C]//2020 21st International Conference on Electronic Packaging Technology (ICEPT). IEEE, Guangzhou, China, 2020: 1-6.
