[1] 王廷, 张秉刚, 陈国庆, 等. 钛/钢异种金属焊接存在问题及研究现状[J]. 焊接, 2009(9): 29 ? 33
Wang Ting, Zhang Binggang, Chen Guoqing, et al. Problems and research status of welding of dissimilar metals between titanium alloy and steel[J]. Welding & Joining, 2009(9): 29 ? 33
[2] 张汇文, 岳鑫, 张九海, 等. 钛合金与不锈钢的钎焊和扩散焊技术研究现状及发展趋势[J]. 焊接, 2006(1): 11 ? 16
Zhang Huiwen, Yue Xin, Zhang Jiuhai, et al. Tendency and research status on brazing and diffusion bonding for titanium as well as its alloy to stainless steel[J]. Welding & Joining, 2006(1): 11 ? 16
[3] 全国海洋船标准化技术委员会. 钛及钛合金复合钢板焊接技术要求: GB/T 13149—2009[S]. 北京: 中国标准出版社, 2009: 7.
National Technical Committee for Standardization of Marine Vessels. Specification for welding of titanium alloy clad steel plates: GB/T 13149—2009[S]. Beijing: China Standards Press, 2009: 7.
[4] Li W, Yan L, Karnati S, et al. Ti-Fe intermetallics analysis and control in joining titanium alloy and stainless steel by laser metal deposition[J]. Journal of Materials Processing Technology, 2017, 242: 39 ? 48.
[5] Deng Y, Sheng G, Xu C. Evaluation of the microstructure and mechanical properties of diffusion bonded joints of titanium to stainless steel with a pure silver interlayer[J]. Materials & Design, 2013, 46(4): 84 ? 87.
[6] Kimura M, Iijima T, Kusaka M, et al. Joining phenomena and tensile strength of friction welded joint between Ti–6Al–4V titanium alloy and low carbon steel[J]. Journal of Manufacturing Processes, 2016, 24: 203 ? 211.
[7] Velmurugan C, Senthilkumar V, Sarala S, et al. Low temperature diffusion bonding of Ti-6Al-4V and duplex stainless steel[J]. Journal of Materials Processing Technology, 2016, 234: 272 ? 279.
[8] Zhao Z, Tariq N U H, Tang J, et al. Microstructural evolutions and mechanical characteristics of Ti steel clad plates fabricated through cold spray additive manufacturing followed by hot-rolling and annealing[J]. Materials & Design, 2020, 185(1): 1 ? 11.
[9] 史春元, 于启湛. 异种金属的焊接[M]. 北京: 机械工业出版社, 2012.
Shi Chunyuan, Yu Qizhan. Welding of dissimilar metals[M]. Beijing: China Machine Press, 2012.
[10] 王洋. (Ni, V)过渡层对钛钢复合板MAG+激光焊接接头组织及性能的影响[D]. 成都: 西南交通大学, 2019.
Wang Yang. Effect of nickel and vanadium intermediate layer on microstructure and properties of MAG+ laser welded joint of titanium-steel composite plate[D]. Chengdu: Southwest Jiaotong University, 2019.
[11] Reichardt A, Dillon R P, Borgonia J P, et al. Development and characterization of Ti-6Al-4 V to 304 L stainless steel gradient components fabricated with laser deposition additive manufacturing[J]. Materials & Design, 2016, 104(8): 404 ? 413.
[12] Zhang Y, Zhang H, Zhu Z, et al. Microstructure, properties and first principles calculation of titanium alloy/steel by Nd: YAG laser self-fluxing welding[J]. China Welding, 2018, 27(3): 1 ? 10.
[13] Ishida K, Gao Y, Nagatsuka K, et al. Microstructures and mechanical properties of friction stir welded lap joints of commercially pure titanium and 304 stainless steel[J]. Journal of Alloys and Compounds, 2015, 630: 172 ? 177.
[14] Kundu S, Chatterjee S. Mechanical properties of diffusion bonded joints between titanium and stainless steel with nickel interlayer[J]. Materials Science and Technology, 2007, 23(10): 1167 ? 1172.
[15] Cooke K O, Richardson A, Khan T I, et al. High-temperature diffusion bonding of Ti–6Al–4V and super-duplex stainless steel using a Cu interlayer embedded with alumina nanoparticles[J]. Journal of Manufacturing and Materials Processing, 2020, 4(1): 1 ? 14.
[16] Fang Y, Jiang X, Song T, et al. Pulsed laser welding of Ti-6Al-4V titanium alloy to AISI316L stainless steel using Cu/Nb bilayer[J]. Materials Letters, 2019, 244: 163 ? 166.
[17] 苗玉刚, 林志成, 邹俊攀, 等. 旁路分流电弧钎焊钛/钢异种金属接头特性分析[J]. 焊接学报, 2019, 40(9): 99 ? 103
Miao Yugang, Lin Zhicheng, Zou Junpan, et al. Characteristic of titanium/steel dissimilar metals jointbrazed by bypass-current arc welding[J]. Transactions of the China Welding Institution, 2019, 40(9): 99 ? 103
[18] Wang T, Zhang B, Chen G, et al. High strength electron beam welded titanium–stainless steel joint with V/Cu based composite filler metals[J]. Vacuum, 2013, 94: 41 ? 47.
[19] Zhang Y, Chen Y, Zhou J, et al. Forming mechanism and mechanical property of pulsed laser welded Ti alloy and stainless steel joint using copper as interlayer[J]. Journal of Materials Research and Technology, 2020, 9(2): 1425 ? 1433.
[20] Li H, Sun D, Gu X, et al. Effects of the thickness of Cu filler metal on the microstructure and properties of laser-welded TiNi alloy and stainless steel joint[J]. Materials & Design, 2013, 50(9): 342 ? 350.
[21] Kundu S, Chatterjee S. Microstructure and mechanical properties of diffusion bonded joints between titanium and stainless steel with copper interlayer[J]. Science and Technology of Welding and Joining, 2013, 12(7): 572 ? 578.
[22] Tomashchuk I, Grevey D, Sallamand P. Dissimilar laser welding of AISI 316L stainless steel to Ti6–Al4–6V alloy via pure vanadium interlayer[J]. Materials Science and Engineering: A, 2015, 622: 37 ? 45.
[23] Nogami S, Miyazaki J, Hasegawa A, et al. Study on electron beam weld joints between pure vanadium and SUS316L stainless steel[J]. Journal of Nuclear Materials, 2013, 442(1-3): S562 ? S566.
[24] 陈满乾, 刘亚芬. TA2/Q235B钛/钢复合板的焊接[J]. 焊接, 2007(8): 53 ? 56
Chen Manqian, Liu Yafen. Welding of TA2/Q235B titanium/steel composite plate[J]. Welding & Joining, 2007(8): 53 ? 56
[25] 刘播. 钛钢复合板焊接接头应力应变场有限元分析[D]. 哈尔滨: 哈尔滨工业大学, 2011.
Liu Bo. Finite element analysis for stress and strain field of titanium/steel composite welded joints[D]. Harbin: Harbin Institute of Technology, 2011.
[26] 李标峰. 钛与钢及钛复合钢板的焊接性研究(IV)[J]. 材料开发与应用, 2004(4): 44 ? 46
Li Biaofeng. Study on the weldability of titanium and steel and titanium clad steel plate(IV)[J]. Development and Application of Materials, 2004(4): 44 ? 46
[27] 毕宗岳, 杨军, 田磊, 等. TA1/X65钛/钢复合板对焊工艺及焊缝组织和性能[J]. 材料导报, 2016, 30(11): 558 ? 563
Bi Zongyue, Yang Jun, Tian Lei, et al. Investigation on the welding process and microstructure and mechanical property of butt joints of TA1/X65 clad plates[J]. Acta Metallurgica Sinica, 2016, 30(11): 558 ? 563
[28] 张亚运, 魏金山, 齐彦昌, 等. TA2/Q235复合板用Ni基过渡层熔焊接头组织和性能[J]. 焊接学报, 2019, 40(1): 75 ? 79
Zhang Yayun, Wei Jinshan, Qi Yanchang, et al. Microstructure and property of fusion welding butt joints of TA2/Q235 composite plate with Ni alloy transition layers[J]. Transactions of the China Welding Institution, 2019, 40(1): 75 ? 79
[29] 齐彦昌, 马成勇, 张亚运, 等. 钛钢复合板熔焊对接过渡层用焊接材料及其焊接方法: 201711241152.0[P]. 2020-10-16.
Qi Yanchang, Ma Chengyong, Zhang Yayun, et al. Welding material and welding method of transition layer for fusion welding of titanium steel composite plate: 201711241152.0[P]. 2020-10-16.
[30] Chu Q, Zhang M, Li J, et al. Influence of vanadium filler on the properties of titanium and steel TIG welded joints[J]. Journal of Materials Processing Technology, 2017, 240: 293 ? 304.
[31] 陈勇, 陈辉, 杨涛, 等. 基于过渡层控制的双侧激光钛钢复合板全焊透焊接方法: 201611103420.8[P]. 2018-04-03.
Chen Yong, Chen Hui, Yang Tao, et al. Double-side laser titanium steel composite plate full penetration welding method based on transition layer control: 201611103420.8[P]. 2018-04-03.
[32] 樊庆仰. 钛-管线钢层状复合板熔焊对接焊接材料及焊接工艺研究[D]. 西安: 西安理工大学, 2016.
Fan Qingyang. Research on welding material and process for fusion weld butt joints of titanium -steel composite plate[D]. Xi'an: Xi'an University of Technology, 2016.
[33] Chu Q, Zhang M, Li J, et al. Intermetallics in CP-Ti/X65 bimetallic sheets filled with Cu-based flux-cored wires[J]. Materials & Design, 2016, 90: 299 ? 306.
[34] Chu Q, Bai R, Zhang M, et al. Microstructure and mechanical properties of titanium/steel bimetallic joints[J]. Materials Characterization, 2017, 132: 330 ? 337.
[35] Chu Q, Zhang M, Li J, et al. Joining of CP-Ti/Q345 sheets by Cu-based filler metal and effect on interface[J]. Journal of Materials Processing Technology, 2015, 225: 67 ? 76.
[36] 褚巧玲. TA1-Q345层状复合板焊接机理及其组织演变行为研究[D]. 西安: 西安理工大学, 2017.
Chu Qiaoling. Fusion welding on TA1/Q345 laminated structure and joint microstructure evolution[D]. Xi'an: Xi'an University of Technology, 2017.
[37] 张敏, 王晓伟, 韩挺, 等. 中间Cu层对TA1/X65复合板熔焊接头性能的影响[J]. 材料研究学报, 2018, 32(2): 81 ? 89
Zhang Min, Wang Xiaowei, Han Ting, et al. Effect of intermediate Cu-layer on mechanical properties of welded joints of TA1/X65 composite plate[J]. Chinese Journal of Materials Research, 2018, 32(2): 81 ? 89
[38] Chu Q L, Zhang M, Li J H, et al. Experimental investigation of explosion-welded CP-Ti/Q345 bimetallic sheet filled with Cu/V based flux-cored wire[J]. Materials & Design, 2015, 67: 606 ? 614.
[39] 安同邦, 由恒源, 李弟, 等. TA2/Q235复合板Nb/Cu双过渡层熔焊焊缝组织性能[J]. 热加工工艺, 2019, 48(9): 18 ? 21
An Tongbang, You Hengyuan, Li Di, et al. Microstructure and property of fusion weld seam of TA2/Q235 composite plate with Nb/Cu double transition layers[J]. Hot Working Technology, 2019, 48(9): 18 ? 21
[40] 徐锦锋, 翟秋亚. 用于钛-钢复合板的焊接材料及焊接方法: 201310479155.3[P]. 2014-02-12.
Xu Jinfeng, Zhai Qiuya. Welding material and welding method for titanium-steel composite plate: 201310479155.3[P]. 2014-02-12.
[41] 史倩茹, 张敏, 吴伟刚. 钛-钢爆炸复合板熔焊对接过渡层焊接材料[J]. 材料工程, 2018, 46(9): 138 ? 143
Shi Qianru, Zhang Min, Wu Weigang. Transition layer welding materials of fusion welding joint for titanium-steel explosive composite plate[J]. Journal of Materials Engineering, 2018, 46(9): 138 ? 143
[42] 吴伟刚, 张敏, 丁旭, 等. TA1/X80复合板用TiNi/NiCrMo双过渡层熔焊对接接头组织及性能[J]. 材料研究学报, 2016, 30(5): 372 ? 378
Wu Weigang, Zhang Min, Ding Xun, et al. Microstructure and mechanical property of fusion weld butt joints of TA1/X80 composite plate with TiNi and NiCrMo double-transition layers[J]. Chinese Journal of Materials Research, 2016, 30(5): 372 ? 378
[43] 郭春富, 郭瑞·弗拉基米尔, 王昕昕, 等. 一种钛钢复合板的焊接方法及其应用: 201810871593.7[P]. 2018-12-21.
Guo Chunfu, Gory· Vladimir, Wang Xinxin, et al. A welding method of titanium steel composite plate and its application: 201810871593.7[P]. 2018-12-21.
