In order to improve the microstructure and mechanical properties of the Sn0.5Ag0.7Cu/Cu joint, by adding Zn element to the Sn0.5Ag0.7Cu solder, changed the intermetallic compound (intermetallic compound, IMC) structure at the joint interface, and the joint shear is strengthened. The ductile fracture characteristics of shear fracture improve the joint shear strength.When the addition of Zn element is 0.4%, the joint shear strength reaches the highest 47.81 MPa.The solder joint of Sn0.5Ag0.7Cu-xZn(x=0, 0.1, 0.4, 0.7, 1) /Cu was studied, the result shows that the addition of Zn element has an inhibitory effect on the growth of the IMC layer in the joint after isothermal aging treatment, and with the increase of aging temperature and aging time, the brittle layer Cu5Zn8. It will break until it disappears, so it will not change its composition and structure while improving the performance of the IMC at the joint interface.
ZHANG Min
,
ZHU Ziyue
,
XU Huanrui
,
WANG Gang
,
DU Mingke
,
WANG Boyu
. Effect of Zn on the shear properties of Sn0.5Ag0.7Cu/Cu joints and the microstructure of aging joints[J]. Transactions of The China Welding Institution, 2021
, 42(5)
: 57
-64
.
DOI: 10.12073/j.hjxb.20200909002
[1] Bradley E, Handwerker C A, Bath J, et al. Lead-free electronics: iNEMI projects lead to successful manufacturing[C]//Reliability & Maintainability Symposium. IEEE, 2007: 1-15.
[2] Fazal M A, Liyana N K, Saeed Rubaiee, et al. A critical review on performance, microstructure and corrosion resistance of Pb-free solders[J]. Measurement, 2019, 134: 897 ? 907.
[3] Guang Ren, Maurice N Collins, Jeff Punch, et al. Pb-free solder—microstructural, material reliability, and failure relationships[M]. Handbook of Materials Failure Analysis, 2020.
[4] Yang L, Quan S, Liu C, et al. Aging resistance of the Sn-Ag-Cu solder joints doped with Mo nanoparticles[J]. Materials Letters, 2019, 253(15): 191 ? 194.
[5] 贾九红, 姚戴锋, 田红春, 等. 钎焊耦合高温波导杆技术测厚可靠性研究[J]. 压力容器, 2021, 38(2): 7 ? 13
Jia Jiuhong, Yao Daifeng, Tian Hongchun, et al. Study on the reliability of the thickness measurement of brazing coupled high temperature waveguide rod technology[J]. Pressure Vessel Technology, 2021, 38(2): 7 ? 13
[6] Chou T T, Song R W, Chen W Y, et al. Enhancement of the mechanical strength of Sn-3.0Ag-0.5Cu/Ni joints via doping minor Ni into solder alloy[J]. Materials Letters, 2019, 235(15): 180 ? 183.
[7] Zhang Min, Xu Huanrui, Wang Gang, et al. Effect of Ga on microstructure and properties of Sn-Zn-Bi solder for photovoltaic ribbon[J]. China Welding, 2019, 28(4): 1 ? 7.
[8] 隋然, 林巧力. SnAgCu-xTi在单晶硅表面的润湿行为[J]. 焊接学报, 2020, 41(4): 90 ? 96
Sui Ran, Lin Qiaoli. Wetting behavior of SnAgCu-xTi on the surface of single crystal silicon[J]. Transactions of the China Welding Institution, 2020, 41(4): 90 ? 96
[9] 姜楠, 张亮, 刘志权, 等. FCBGA器件SnAgCu焊点的热冲击可靠性分析[J]. 焊接学报, 2019, 40(9): 39 ? 42
Jiang Nan, Zhang Liang, Liu Zhiquan, et al. Thermal shock reliability analysis of SnAgCu solder joints for FCBGA devices[J]. Transactions of the China Welding Institution, 2019, 40(9): 39 ? 42
[10] Yee-Wen Y, William Y, Chu-Hsuan W, et al. Study of interfacial reactions between lead-free solders and Cu-xZn alloys[J]. Journal of Electronic Materials, 2018, 48(13): 170 ? 181.
[11] Wang S, Yao Y, Wang W. Microstructure and size effect of interfacial intermetallic on fracture toughness of Sn3.0Ag0.5Cu solder interconnects[J]. Engineering Fracture Mechanics, 2018, 202(15): 259 ? 274.
[12] Kunwar A, Shang S, Raback P, et al. Heat and mass transfer effects of laser soldering on growth behavior of interfacial intermetallic compounds in Sn/Cu and Sn-3.5Ag0.5/Cu joints[J]. Microelectronics Reliability, 2018, 80: 55 ? 67.
[13] Ali B, Sabri M F M, Said S M, et al. Microstructural and tensile properties of Fe and Bi added Sn-1Ag-0.5Cu solder alloy under high temperature environment[J]. Microelectronics Reliability, 2018, 82: 171 ? 178.
[14] Shang S, Wang Y, Wang Y, et al. Enhancement of hardness of bulk solder by doping Cu nanoparticles at the interface of Sn/Cu solder joint[J]. Microelectronic Engineering, 2019, 208(1): 47 ? 53.
[15] Gusak A M, Tu K N. Kinetic theory of flux-driven ripening[J]. Physical Review B, 2002, 66(11): 115403.
[16] 杨扬. Sn基钎料/Cu界面柯肯达尔空洞机理研究[D]. 上海: 上海交通大学, 2012.
Yang Yang. Study on the Kirkendall void mechanism of Sn-based solder/Cu interface[D]. Shanghai: Shanghai Jiao Tong University, 2012.
[17] Paul A. The Kirkendall effect in solid state diffusion[D]. Eindhoven: Technical University of Eindhoven, 2004.
