In order to study the stress of the mandible under different occlusal methods and different bite forces, based on the existing head CT data, the mandible was extracted through the medical software Mimics and the three-dimensional model was established, and the mandible was analyzed by redrawing the mesh, constructing the contour line, constructing the curved surface, constructing the grille, and fitting the surface. Through to the normal mandible and 3 d printing titanium implant restoration of mandibular were analyzed, and the results show that: in the 3 d printing on the titanium alloy implant restoration of mandibular adult male before and after loading teeth can withstand maximum force, mandibular by stress are less than normal mandible by stress.
LI Suli
,
YANG Laixia
,
LU Bingheng
. Analysis of different occlusal modes and bite force of mandible[J]. Transactions of The China Welding Institution, 2020
, 41(11)
: 54
-61,82
.
DOI: 10.12073/j.hjxb.20200514001
[1] Zuo H S, Li H, Qi L, et al. Formation mechanism of defects in aluminum alloy during micro-droplet deposition[J]. Rare Metal Materials and Engineering, 2013, 42(8): 1596-1600.
[2] Yang G, Qi L, Luo J, et al. Uniform droplet spray forming slightly soluble drop key online testing system[J]. Chinese Journal of Scientific Instrument, 2009, 30(3): 590-597.
[3] 张晓萍, 颜永年. 熔融堆积成形过程温度场的模拟研究[J]. 中国机械工程, 2000, 11(10): 1101-1104
Zhang Xiaoping, Yan Yongnian. Simulation study of temperature field in the process of melting accumulation[J]. China Mechanical Engineering, 2000, 11(10): 1101-1104
[4] 王天明, 金烨, 习俊通. FDM 工艺过程中丝材的粘结机理与热学分析[J]. 上海交通大学学报, 2006, 40(7): 1230-1234
Wang Tianming, Jin Ye, Xi Juntong. Bonding mechanism and thermal analysis of wire during FDM process[J]. Journal of Shanghai Jiaotong University, 2006, 40(7): 1230-1234
[5] 李素丽, 魏正英, 卢秉恒. 基于ANSYS的车身柔性件点焊装配应力分析[J]. 焊接学报, 2014, 35(11): 14-18
Li Suli, Wei Zhengying, Lu Bingheng. Stress analysis of spot welding assembly of body flexible parts based on ANSYS[J]. Transactions of the China Welding Institution, 2014, 35(11): 14-18
[6] Wang A, Xu C, Zhang C, et al. Experimental investigation of the properties of electrospun nanofibers for potential medical application[J]. Journal of Nanomaterials, 2015, 40(7): 1230-1238.
[7] 李素丽, 魏正英, 卢秉恒. 高温钛合金微滴沉积成形有限元分析[J]. 郑州大学学报:工学版, 2014, 4: 124-128
Li Suli, Wei Zhengying, Lu Bingheng. Finite element analysis of droplet deposition forming of high temperature titanium alloy[J]. Journal of Zhengzhou University (Engineering Science), 2014, 4: 124-128
[8] Orme M, Smith R. Enhanced aluminum properties by means of precise droplet deposition[J]. Journal of Manufacturing Science and Engineering, 2000, 122(3): 484-493.
[9] Li S, Wei Z, Du J, et al. The fusion process of successive droplets impinging onto a substrate surface[J]. Applied Physics A, 2015, 120(1): 35-42.
[10] Li S, Wei Z, Du J, et al. A numerical analysis on the metal droplets impacting and spreading out on the substrate[J]. Rare Metal Materials and Engineering, 2017, 46(4): 893-898.
[11] Wei P, Wei Z, Li S, et al. Splat formation during plasma spraying for 8 mol% yttria-stabilized zirconia droplets impacting on stainless steel substrate[J]. Applied Surface Science, 2014, 321: 538-547.
[12] Luo Q B, Huang C Z, Orme M. Study on stable delivery of charged uniform droplets for freeform fabrication of metal parts[J]. Science China Technological Sciences, 2011, 54(7): 1833-1840.
[13] 程康杰. 修复下颌骨缺损的复合结构植入体优化设计及制备研究[D]. 杭州: 浙江工业大学, 2020.
Cheng Kangjie. Optimal design and preparation of composite structure implant for repairing mandibular defect [D]. Hangzhou: Zhejiang University of Technology, 2020.
[14] 李长春. 增材制造个性化钛合金在下颌骨缺损修复重建中的临床应用研究[D]. 南京: 南京医科大学, 2018.
Li Changchun. Clinical application of additive manufacturing personalized titanium alloy in mandibular defect repair and reconstruction [D]. Nanjing: Nanjing Medical University, 2018.
