[1] 李晓林, 崔阳, 肖宝亮, 等. V-N微合金钢在线快速感应回火工艺中V(C, N)析出强化机制[J]. 金属学报, 2018, 54(10): 1368-1376
Li Xiaolin, Cui Yang, Xiao Baoliang, et al. Effects of on-line rapid induction tempering on pricipitation strengthening mechanism of V(C, N) in V-N microalloyed steel[J]. Acta Metallurgica Sinica, 2018, 54(10): 1368-1376
[2] 刘东雨, 徐鸿, 杨昆, 等. 贝氏体/马氏体复相组织对低碳合金钢强韧性的影响[J]. 金属学报, 2004, 40(8): 882-886
Liu Dongyu, Xu Hong, Yang Kun, et al. Effect of bainite/martensite mixed microstructure on the strength and toughness of low carbon alloy steels[J]. Acta Metallurgica Sinica, 2004, 40(8): 882-886
[3] Hardy M. Guest editorial of “application of high strength steels in light weight commercial vehicles”[J]. Advances in Manufacturing, 2015, 3(1): 1-2.
[4] 马鸣图, Shi M F. 先进的高强度钢及其在汽车工业中的应用[J]. 钢铁, 2004(7): 68-72
Ma Mingtu, Shi M F. Advanced high strength steel and its applications in automobile industry[J]. Iron and Steel, 2004(7): 68-72
[5] 张楠,田志凌,潘辉,等. 热轧汽车结构钢在轻量化商用车上的发展与应用[J]. 汽车文摘, 2020(9): 1-11
Zhang Nan, Tian Zhiling, Pan Hui, et al. Development and application of hot rolled automotive structural steel in lightweight commercial vehicles[J]. Automotive Digest, 2020(9): 1-11
[6] 中国汽车工程学会. 节能与新能源汽车技术路线图[M]. 北京: 机械工业出版社, 2016.
Chinese Society of Automotive Engineering. Energy-saving and new energy vehicle technology roadmap[M]. Beijing: Machinery Industry Press, 2016.
[7] 张大伟, 杜林秀, 肖宝亮, 等. 乘用车轮辐用600 MPa级热轧双相钢失效原因分析[J]. 金属热处理, 2018, 43(7): 224-228
Zhang Dawei, Du Linxiu, Xiao Baoliang, et al. Failure analysis of 600 MPa hot rolled dual phase steel for passenger car wheel spoke[J]. Heat Treatment of Metals, 2018, 43(7): 224-228
[8] Wang S C, Kao P W. The effect of alloying elements on the structure and mechanical properties of ultra low carbon bainitic steels[J]. Journal of Materials Science, 1993, 28(19): 5169-5175.
[9] Gorni A A, Mei P R. Austenite transformation and age hardening of HSLA-80 and ULCB steels[J]. Journal of Materials Processing Technology, 2004, 155: 1513-1518.
[10] 刘伟建, 臧淼, 安海玉, 等. 热成型汽车桥壳用Q460C高强度钢板的开发[J]. 宽厚板, 2018, 24(5): 46-48
Liu Weijian, Zang Miao, An Haiyu, et al. Development of high strength steel q460c used in hot forming automobile axle housing[J]. Wide and Heavy Plate, 2018, 24(5): 46-48
[11] 荆洪阳, 马崇, 樊立国, 等. TMCP钢焊接热影响区局部脆化区断裂韧度测试[J]. 焊接学报, 2004, 25(3): 19-23
Jing Hongyang, Ma Chong, Fan Liguo, et al. Investigation on measurement of fatigue toughness for local brittle zone in weld heat-affected zone of TMCP steels[J]. Transactions of The China Welding Institution, 2004, 25(3): 19-23
[12] 付魁军, 高铭泽, 冷雪松, 等. TiNb钢焊接热影响区微观组织与冲击性能演变规律[J]. 焊接学报, 2019, 40(5): 36-41
Fu Kuijun, Gao Mingze, Leng Xuesong, et al. Evolution of microstructure and impact property in welding HAZ of TiNb steel[J]. Transactions of the China Welding Institution, 2019, 40(5): 36-41
[13] 贺信莱, 尚成嘉, 杨善武,等. 高性能低碳贝氏体钢-成分、工艺、组织、性能与应用[M]. 北京: 冶金工业出版社, 2008.
He Xinlai, Shang Chengjia, Yang Shanwu, et al. High-performance low-carbon bainitic steel-composition, workmanship Art, organization, performance and application[M]. Beijing: Metallurgical Industry Press, 2008.
[14] 宋晓飞, 林荣会, 李帅朝, 等. 基于OptiStruct的驱动桥壳轻量化设计[J]. 机械传动, 2019, 43(4): 83-88,97
Song Xiaofei, Lin Ronghui, Li Shuaichao, et al. Lightweight design of drive axle housing based on optiStruct[J]. Journal of Mechanical Transmission, 2019, 43(4): 83-88,97
[15] 邹喜红, 刘瑜, 袁冬梅, 等. 桥壳多轴向多激励虚拟试验系统研究[J]. 振动与冲击, 2018, 37(23): 157-163,189
Zou Xihong, Liu Yu, Yuan Dongmei, et al. Multi-axial and multi-excitation virtual text system for axle housing[J]. Journal of Vibration and Shock, 2018, 37(23): 157-163,189
[16] 张志远, 刘玉梅, 陈涛, 等. 重型牵引车后桥振动疲劳分析及试验研究[J]. 北京理工大学学报, 2018, 38(3): 267-271+299
Zhang Zhiyuan, Liu Yumei, Chen Tao, et al. Vibration fatigue analysis and experimental study of heavy duty truck rear axle[J]. Transactions of Beijing Institute of Technology, 2018, 38(3): 267-271+299
[17] 张杰, 蔡庆伍, 武会宾, 等. 快速加热回火对690 MPa 级海洋工程用钢组织和性能的影响[J]. 金属学报, 2013, 49(12): 1549-1557
Zhang Jie, Cai Qingwu, Wu Huibin, et al. Effect of tempering temperature on micro-structure and property of 690 MPa grade ocean engineering steel under fast heating rate[J]. Acta Metallurgica Sinica, 2013, 49(12): 1549-1557
[18] 房玉佩, 谢振家, 尚成嘉. 感应回火对1000 MPa级高强度低合金钢碳化物析出行为及韧性的影响[J]. 金属学报, 2014, 50(12): 1413-1420
Fang Yupei, Xie Zhenjia, Shang Chenjia. Effect of induction tempering on carbide precipitation behavior and toughness of a 1000 MPa grade high strength low alloy steel[J]. Acta Metallurgica Sinica, 2014, 50(12): 1413-1420
[19] 杨庚蔚, 陆佳伟, 孙辉, 等. Ti-V微合金化热轧高强钢的相变规律及组织性能[J]. 钢铁研究学报, 2019, 31(8): 726-732
Yang Gengwei, Lu Jiawei, Sun Hui, et al. Microstructure, mechanical properties and phase transformation behavior of Ti-V microalloyed high strength hot strip steel[J]. Journal of Iron and Steel Research, 2019, 31(8): 726-732
[20] 刘亚军. 基于车轮六分力测量的某商用车车架疲劳寿命分析研究[D]. 合肥: 合肥工业大学, 2018.
Liu Yajun. Analysis of the fatigue life of a commercial vehicle frame based on the measurement of the six-component force of the wheel[D]. Hefei: Hefei University of Technology, 2018.
[21] 范例, 谢里阳, 张娜. 重卡驱动桥壳疲劳稳健性与轻量化设计[J]. 东北大学学报(自然科学版), 2019, 40(3): 365-369
Fan Li, Xie Liyang, Zhang Na. Fatigue robustness and lightweight design of driving axle housing for heavy truck[J]. Journal of Northeastern University (Natural Science), 2019, 40(3): 365-369
[22] 李晓林, 肖宝亮, 崔阳, 等. 600 MPa冷压桥壳钢疲劳裂纹扩展速率[J]. 新技术新工艺, 2017(3): 1-4
Li Xiaolin, Xiao Baoliang, Cui Yang, et al. Fatigue crack propagation rate of 600 mpa cold stamping axle housing steel[J]. New Technology & New Process, 2017(3): 1-4
[23] 李晓刚, 张楠, 赵爱民. 60 kg级埋弧焊丝熔敷金属的疲劳裂纹扩展速率[J]. 电焊机, 2016, 46(4): 98-100,133
Li Xiaogang, Zhang Nan, Zhao Aimin. Crack propagation rate of deposited metal of 60 KG level submerged arc welding wire[J]. Electric Welding Machine, 2016, 46(4): 98-100,133
[24] 易镇. X100 管线钢焊接线能量对粗晶区组织和性能的影响[D]. 武汉: 华中科技大学, 2014.
Yi Zhen. The influence of X100 pipeline steel welding heat input on the microstructure and properties of the coarse-grained zone[D]. Wuhan: Huazhong University of Science and Technology, 2014.
[25] 宋雪雁, 荆天辅, 刘文昌, 等. V-Ti微合金化贝氏体非调质钢再结晶奥氏体连续冷却转变[J]. 钢铁, 1998, 33(2): 46-49
Song Xueyang, Jing Tianfu, Liu Wengchang, et al. Continuous cooling transformation of recrystallized austenite for a V-Ti microalloyed bainite forging steel[J]. Iron and Steel, 1998, 33(2): 46-49
[26] 缪成亮, 尚成嘉, 王学敏, 等. 高Nb X80管线钢焊接热影响区显微组织与韧性[J]. 金属学报, 2010, 46(5): 541-546
Miu Chenliang, Shang Chengjia, Wang Xuemin, et al. Microstructure and toughness of HAZ in X80 pipeline steel with high Nb content[J]. ACTA Metallurgica Sinica, 2010, 46(5): 541-546
[27] 雍岐龙. 钢铁材料中的第二相[M]. 北京: 冶金工业出版社, 2006.
Yong Qilong. The second phase in steel materials[M]. Beijing: Metallurgical Industry Press, 2006.
[28] 崔辰硕. V-N微合金钢贝氏体区析出行为及组织性能研究[D]. 沈阳: 东北大学, 2015.
Cui Chenshuo. Study on the precipitation behavior and microstructure properties of the bainite zone of V-N microalloy steel[D]. Shenyang: Northeastern University, 2015.
[29] 张楠, 田志凌, 张书彦, 等. Q700D热影响粗晶区疲劳寿命与小裂纹扩展分析[J]. 钢铁研究学报, 2019, 31(8): 741-747
Zhang Nan, Tian Zhiling, Zhang Shuyan, et al. Prediction of fatigue life and behavior analysis of small creak propagation in CGHAZ of Q700D[J]. Journal of Iron and Steel Research, 2019, 31(8): 741-747
[30] 张楠, 田志凌, 董现春, 等. Q960E热影响粗晶区疲劳寿命与ΔKth值的关系分析[J]. 焊接学报, 2018, 39(7): 106-110
Zhang Nan, Tian Zhiling, Dong Xianchun, et al. Research on relationship between ΔKth and fatigue life of heat-affected coarse grain zone in Q960E[J]. Transactions of the China Welding Institution, 2018, 39(7): 106-110
[31] Chen J H, Cao R. Micromechanism of cleavage fracture of metals[M]. Beijing: Science Press, 2019.
