The microstructure and mechanical properties of as welded and post weld heat-treated linear friction welded joints of TC17 titanium alloy were compared and analyzed. The results show that the microstructure of the welded joint is recovered and recrystallized. Due to the rapid cooling rate after welding, metastable β phase is formed, and the weld zone is softened; the microstructure in the thermo mechanical affected zone is elongated and refined along the stress deformation direction The microhardness of the heat affected zone decreases significantly because the secondary α phase is dissolved in metastable β phase. After post weld heat treatment, metastable β phase decomposes in aging and precipitates acicular secondary α phase with higher dispersion, which greatly improves the hardness of welding zone. The results show that due to the formation of metastable phase, the welded joints soften, and the tensile strength is 91.8% of the base metal strength, and the fracture is brittle fracture; the joints in the post weld heat treatment state have the effect of dispersion strengthening due to the precipitation of secondary α phase, and the tensile tests are all broken in the base metal, and the fracture is in the typical ductile fracture morphology.
ZHOU Jun
,
LIANG Wu
,
ZHANG Chunbo
,
WU Yanquan
. Microstructure and mechanical properties of linear friction welding joint of TC17 titanium alloy[J]. Transactions of The China Welding Institution, 2020
, 41(5)
: 36
-41
.
DOI: 10.12073/j.hjxb.20200408002
[1] 周军, 张春波, 杜淼, 等. 摩擦焊在航空领域的应用[J]. 焊接, 2017(6): 1-5
Zhou Jun, Zhang Chunbo, Du Miao, et al. Application of friction welding in aviation[J]. Welding & Joining, 2017(6): 1-5
[2] 张田仓, 李菊, 何胜春, 等. 摩擦焊技术在航空发动机研制中的应用[J]. 航空制造技术, 2014, 464(20): 69-71
Zhang Tiancang, Li Ju, He Shengchun, et al. Application of friction welding technology in aeroengine development[J]. Aviation Manufacturing Technology, 2014, 464(20): 69-71
[3] 郭德伦. 国外先进焊接技术在航空领域的应用进展[J]. 航空制造技术, 2014(20): 62-64
Guo Delun. Application progress of foreign advanced welding technology in aviation[J]. Aviation Manufacturing Technology, 2014(20): 62-64
[4] 梁武, 张春波, 乌彦全, 等. 轻质异种材料摩擦焊研究现状[J]. 焊接, 2008, 545(11): 19-25
Liang Wu, Zhang Chunbo, Wu Yanquan, et al. Research status of friction welding of lightweight heterogeneous materials[J]. Welding & Joining, 2008, 545(11): 19-25
[5] 季亚娟, 张田仓, 李晓红. TC11/TC17钛合金线性摩擦焊接头组织与性能[J]. 航空制造技术, 2011(8): 58-61
Ji Yajuan, Zhang Tiancang, Li Xiaohong. Microstructure and performance of linear friction welding joint of TC11/TC17 titanium alloy[J]. Aerospace Manufacturing Technology, 2011(8): 58-61
[6] 李菊, 张田仓, 郭德伦. 热处理对TC17(α + β)/TC17(β)线性摩擦焊接头组织及力学性能的影响[J]. 焊接学报, 2018, 39(5): 97-100
Li Ju, Zhang Tiancang, Guo Delun. Effects of heat treatment on microstructure and mechanical properties of linear friction welded joints of TC17 (α + β)/TC17 (β)[J]. Transactions of the China Welding Institution, 2018, 39(5): 97-100
[7] 贺建超, 张田仓, 季亚娟, 等. 热处理对TC4/TC17线性摩擦焊接头组织与性能的影响[J]. 材料热处理学报, 2016, 37(1): 188-191
He Jianchao, Zhang Tiancang, Ji Yajuan, et al. Effects of heat treatment on microstructure and properties of TC4/TC17 linear friction welding joints[J]. Journal of material heat treatment, 2016, 37(1): 188-191
[8] 赵鹏康. TC11/TC17钛合金线性摩擦焊接头组织与性能研究[D]. 西安：西北工业大学，2016.
Zhao Pengkang. Study on microstructure and performance of linear friction welding joint of TC11/TC17 titanium alloy [D]. Xi'an: Northwestern Polytechnical University, 2016.
[9] 崔忠圻, 刘北兴. 金属学与热处理原理[M]. 哈尔滨: 哈尔滨工业大学出版社, 2007.
Cui Zhongqi, Liu Beixing. Principles of metallization and heat treatment [M]. Harbin: Harbin Institute of Technology Press, 2007.
