In the short-circuiting transfer process of CO2 arc welding, the concept of load voltage-ampere characteristic curve and single cycle load voltage-ampere characteristic curve were put forward in view of the dynamic characteristic behavior of "power-arc-liquid bridge" system, which integrated the expression of different references. Under same welding conditions and parameters, the difference of load voltage-ampere characteristic curve among three welding machines were studied and their welding seam qualities were compared. The results shown that if the load voltage-ampere characteristic curve was closer to the origin of coordinate, welding spatter degree would be smaller. Additionally, the better repeatability of the curve waa, the more stable welding process and the more beautiful welding seam would be. However, if the area enclosed by curves was too large, the possibility of welding defects, such as incomplete fusion and asymmetry of welding seam, would increase.
ZHAI Peizhuo
,
XUE Songbai
,
SUN Zijian
,
CHEN Tao
,
CHEN Weizhong
. Comparative study on load voltage-ampere characteristic and seam quality of CO2 arc welding[J]. Transactions of The China Welding Institution, 2019
, 40(8)
: 33
-37
.
DOI: 10.12073/j.hjxb.2019400205
[1] Kim I S, Son J S, Kim I G, et al. A study on relationship between process variables and bead penetration for robotic CO2 arc welding[J]. Journal of Materials Processing Technology, 2003, 136(1-3):139-145.
[2] Kah P, Suoranta R, Martikainen J. Advanced gas metal arc welding processes[J]. The International Journal of Advanced Manufacturing Technology, 2013, 67(1-4):655-674.
[3] 李桓,李俊岳,杨立军,等. CO2气体保护焊短路过渡过程的闭环实时控制[J].焊接学报, 2001, 22(1):27-30 Li Huan, Li Junyue, Yang Lijun, et al. The closed-loop real-time controlling of short-circuiting transfer in CO2 arc welding[J]. Transactions of the Chinese Welding Institution, 2001, 22(1):27-30
[4] Era T, Ueyama T, Hirata Y. Spatter reduction in gas metal arc welding of stainless steel sheets using controlled bridge transfer process[J]. Science and Technology of Welding and Joining, 2009, 14(8):708-716.
[5] Zhenmin W, Jiaxiang X, Fei D, et al. An analysis of the dynamic resistance and the instantaneous energy of the CO2 arc welding process[J]. China Welding, 2007, 16(1):77-82.
[6] Li R, Lei X, Zhou P. Analysis of welding defects in spot welding process U-I curves[C]//2009 Third International Conference on Genetic and Evolutionary Computing. IEEE, 2009:201-204.
[7] Kolasa A, Matsunawa A, Arata Y. Dynamic characteristics of variable frequency pulsed TIG arc (welding physics, process&instrument)[J]. Transactions of JWRI, 1986, 15(2):173-177.
[8] 张晓囡. CO2弧焊电源动特性评定新方法的研究[D].广州:华南理工大学, 1999.
[9] 黄石生,王金祥,蒋志林.电弧为动态模型的电弧焊逆变器的仿真[J].机械工程学报, 1996, 32(4):79-82 Huang Shisheng, Wang Jinxiang, Jiang Zhilin. Simulation on arc welding inverter containing dynamic arc model[J]. Journal of Mechanical Engineering, 1996, 32(4):79-82
[10] 余文松,薛家祥,黄石生,等. CO2电弧焊动态过程的MATLAB仿真研究[J].焊接学报, 1999, 20(3):153-157 Yu Wensong, Xue Jiaxiang, Huang Shisheng, et al. Simulation study on dynamic process of CO2 arc welding with MATLAB[J]. Transactions of the Chinese Welding Institution, 1999, 20(3):153-157
[11] 陈茂爱,蒋元宁,武传松.受控短路过渡CO2焊焊接电流波形参数优化[J].焊接学报, 2014, 35(7):79-82 Chen Maoai, Jiang Yuanning, Wu Chuansong. Optimization of welding current waveform parameters in controlled short circuiting transfer GMAW[J]. Transactions of the Chinese Welding Institution, 2014, 35(7):79-82
