Friction plug welding for AA2219-T87 friction stir welds were performed, the macro/micro structures, hardness distributions and tensile strength were observed and tested, and the tensile fracture was observed by scanning electron microscope. The main findings are as follows:With 7500rpm rotational speed and axial force 40~55 kN can obtain defect-free plug welded joint; The ultimate tensile strength (UTS) and elongation of FPW joint in perpendicular direction can reach 336 MPa and 8%, respectively, approximately 73. 9% and 66. 7% being equivalent to that of base metal; The weakest bonding regions are always produced at the bottom bonding interface between the BM and PM and how to control the connection quality of the bottom bonding interface should be the key factor affecting the tensile properties of the friction plug welding joint.
LIU Kaixuan
,
SUN Zhuanping
,
YANG Xinqi
,
DU Bo
,
SONG Jianling
. Microstructure and mechanical properties of friction plug welding for friction stir welded aluminum alloy[J]. Transactions of The China Welding Institution, 2019
, 40(6)
: 118
-125
.
DOI: 10.12073/j.hjxb.2019400165
[1] Wang Dayong, Feng Jicai, Guo Delun, et al. Process of friction-stir welding high-strength aluminum alloy and mechanical properties of joint[J]. China Welding, 2004, 13(2):159-162.
[2] 邢丽,柯黎明,刘鸽平,等.铝合金LD10的搅拌摩擦焊组织及性能分析[J].焊接学报, 2002, 23(6):55-58 Xing Li, Ke Liming, Liu Geping, et al. Microstructure and performance analysis of friction stir welding of aluminum alloy LD10[J]. Transactions of the China Welding Institution, 2002, 23(6):55-58
[3] Hartley P J, McCool A. Friction plug weld repair for the space shuttle external tank[R]. New Orleans, LA United States:Lockheed Martin Manned Space Systems, 2000.
[4] 范平章.摩擦塞补焊研发与关键问题[J].航天制造技术, 2007, 2(1):34-37 Fan Pingzhang. Development of friction plug repair welding and key issues[J]. Aerospace Manufacturing Technology, 2007, 2(1):34-37
[5] 赵衍华,刘景铎,朱瑞灿,等.补焊技术的新突破——摩擦塞补焊[J].焊接, 2009(9):16-21 Zhao Yanhua, Liu Jingduo, Zhu Ruican, et al. A new breakthrough of repair welding technology-friction plug welding[J]. Welding&Joining, 2009(9):16-21
[6] Metz D F, Weishaupt E R, Barkey M E, et al. A microstructure and microhardness characterization of a friction plug weld in friction stir welded 2195 Al-Li[J]. Journal of Engineering Materials and Technology, 2012, 134(2):021005.
[7] Metz D F, Barkey M E. Fatigue behavior of friction plug welds in 2195 Al-Li alloy[J]. International Journal of Fatigue, 2012, 43:178-187.
[8] 栾国红,季亚娟,董春林,等. LY12铝合金摩擦塞补焊接头组织分析[J].焊接学报, 2006, 27(10):1-3 Luan Guohong, Ji Yajuan, Dong Chunlin, et al. Microstructure of LY12 aluminum alloy welded joint of friction plug welding[J]. Transactions of the China Welding Institution, 2006, 27(10):1-3
[9] 赵衍华,刘景铎,张加涛,等. 2014铝合金拉锻式摩擦塞补焊接头微观组织及力学性能[J].航空制造技术, 2009(23):86-90 Zhao Yanhua, Liu Jingduo, Zhang Jiatao, et al. Microstructure and mechanical properties of friction plug welded joint of 2014 aluminum alloy[J]. Aeronautical Manufacturing Technology, 2009(23):86-90
[10] 王国庆,赵衍华,孔德跃,等. LD10铝合金熔焊接头缺陷的拉锻式摩擦塞补焊[J].焊接, 2010(6):38-42 Wang Guoqing, Zhao Yanhua, Kong Deyue, et al. Friction plug welding for welded joint defects of LD10 aluminum alloy[J]. Welding&Joining, 2010(6):38-42
