To solve the problems of hot cracks, pores and softening of welded joints in the traditional welding process of 7 series super hard aluminum, the mechanism of nonlinear relationship between welding process parameters and the strength of welded joints during vibration welding process is studied in the paper. The nonlinear time series prediction model of 7075 super hard aluminum vibration welded joints with process parameter measurement data. Used the parameter measurement data of 7075 super hard aluminum vibration welding process, the time series of welding process parameters is established, and the phase space reconstruction parameters and deterministic test methods of the welding process system are established based on time series. The artificial neural network model of the phase space phase point evolution trajectory is established in the basis of the nonlinear relationship between the phase evolution trajectory of the reconstructed phase space and the strength parameters of the welded joint. The model is used to calculate the physical parameters such as the elongation after fracture, tensile strength, hardness, weld reinforcement, maximum coarseness of the crystal, and the number of crystal grains. A series of welded joint strength tests for the established model show that the prediction results of this model can meet the engineering practical value.
LIU Zhengjun
,
ZHANG Kun
,
LIU Changjun
. Study on nonlinear time series model of vibration welding process of aluminum alloy[J]. Transactions of The China Welding Institution, 2019
, 40(3)
: 85
-90
.
DOI: 10.12073/j.hjxb.2019400077
[1] Kumar P V, Reddy G M, Rao K S. Microinstruction, mechanical and corrosion behavior of high strength AA7075 aluminium alloy friction stir weld-effect of post weld heat treatment[J]. Defence Technology, 2015, 11(4):362-369.
[2] 赵海洋. 铝合金搅拌摩擦焊焊接接头组织及疲劳断裂行为研究[D]. 天津:天津大学, 2010.
[3] 刘长军. 双脉冲MIG焊7075超硬铝合金焊接接头组织与性能的研究[D]. 沈阳:沈阳工业大学, 2017.
[4] 于秀萍, 孙华, 赵希人, 等. 基于人工神经网络的焊缝宽度预测[J]. 焊接学报, 2005, 26(5):17-19, 45 Yu Xiuping, Sun Hua, Zhao Xiren, et al. Weld wild prediction based on artofocal neural network[J]. Transactions of the China Welding Institution, 2005, 26(5):17-19, 45
[5] 姚萍, 薛家祥, 蒙万君, 等. 工艺参数对铝合金双脉冲MIG焊焊缝成形的影响[J]. 焊接学报, 2009, 20(3):69-72 Yao Ping, Xue Jiaxiang, Meng Wanjun, et al. Influence of processing parameters on weld forming in double-pulsed MIG welding of aluminum alloy[J]. Transactions of the China Welding Institution, 2009, 20(3):69-72
[6] Yi J, Cao S F, Li L X, et al. Effect of welding current on morphology and micro-structure of Al alloy T-joint in double-pulsed MIG welding[J]. Transactions of Nonferrous Metals Society of China, 2015, 25(10):3204-3211.
[7] 佟建华, 张坤, 林松, 等. 搅拌摩擦焊和熔化极气体保护焊6082铝合金疲劳性能分析[J]. 焊接学报, 2015, 36(7):105-108 Tong Jianhua, Zhang Kun, Lin Song, et al. Comparison of fatigue property of 6082 aluminum alloy joint by friction stir welding and metal inert-gas welding[J]. Transactions of the China Welding Institution, 2015, 36(7):105-108
[8] 夏卫生, 张海鸥, 王桂兰, 等. 基于多层ANN的机器人等离子熔射智能化模型[J]. 焊接学报, 2009, 30(7):41-44 Xia Weisheng, Zhang Haiou, Wang Guilan, et al. Intelligent process modeling of robotic plasma spraying based on multi-layer artificial neural network[J]. Transactions of the China Welding Institution, 2009, 30(7):41-44
