Ag-Cu-Ti and Ag-Cu-In-Ti active filler metals were used to braze AlN ceramic and Kovar alloy in the vacuum brazing furnace. The corresponding brazing parameters were 860 ℃/10 min and 760 ℃/10 min, respectively, and sound AlN/ Kovar alloy joints were obtained. The shear strengths of AlN/Ag-Cu-Ti/4J29 and AlN/Ag-Cu-In-Ti/4J29 joints were 126 and 113 MPa, respectively. The microanalysis results show that a continuous diffusion layer formed near the ceramic substrate. The TiN phase was detected in the layer by XRD. The thickness of the diffusion layer had obvious effect on the joint strength. Cu(s,s), Ag(s,s) and Ni(Fe, Co)-Ti compounds formed in the brazing seam matrix.
ZHU Chengjun
,
LI Chengsi
,
DONG Xuehua
. Microstructure and strength of AlN/Kovar alloy joints brazed with two Ag-based active filler metals[J]. Transactions of The China Welding Institution, 2018
, 39(10)
: 16
-19,40
.
DOI: 10.12073/j.hjxb.2018390241
[1] Cao C W, Feng Y B, Qiu T, et al. Effects of isothermal annealing on the oxidation behavior, mechanical and thermal properties of AlN ceramics[J]. Ceramics International, 2017, 43(5):9334-9342.
[2] 钟伟, 邹桂娟. 氧化铝陶瓷金属化层温度分析研究[J]. 真空科学与技术学报, 2016, 36(6):718-722 Zhong Wei, Zou Guijuan. Modeling and simulation of temperature field in Al2O3 ceramic metallization[J]. Chinese Journal of Vacuum Science and Technology, 2016, 36(6):718-722
[3] 陈波, 熊华平, 毛唯, 等. 采用Au基钎料真空钎焊Al2O3陶瓷[J]. 焊接学报, 2016, 37(11):47-50 Chen Bo, Xiong Huaping, Mao Wei, et al. Vacuum brazing of Al2O3 ceramic using Au-based brazing filler[J]. Transactions of the China Welding Institution, 2016, 37(11):47-50
[4] 鲁燕萍, 高陇桥. AlN陶瓷的薄膜金属化及其与金属的焊接研究[J]. 真空科学与技术学报, 2000, 20(2):190-193 Lu Yanping, Gao Longqiao. Surface metallization and welding of aluminum nitride ceramic[J]. Chinese Journal of Vacuum Science and Technology, 2000, 20(2):190-193
[5] Zhao L, Hou J B, Li X H. Interfacial structure and mechanical property of A12O3 and Invar brazed joint[J]. China Welding, 2016, 25(4):68-73.
[6] Sun Z, Zhang L X, Zhang Z H, et al. Microstructure and mechanical response of the SiO2f/SiO2 composite and Invar alloy joints brazed with an AgCuTi alloy[J]. Materials & Design, 2016, 111:239-247.
[7] Guedes A, Pires Pinto A M. Active metal brazing of machinable aluminum nitride-based ceramic to stainless steel[J]. Journal of Materials Engineering and Performance, 2012, 21(5):671-677.
[8] 张玲艳, 秦明礼, 曲选辉, 等. AIN/Mo-Ni-Cu的活性封接研究[J]. 稀有金属材料与工程, 2009, 38(12):2159-2162 Zhang Lingyan, Qin Mingli, Qu Xuanhui, et al. Study on active brazing of AlN ceramics and Mo-Ni-Cu alloy[J]. Rare Metal Materials and Engineering, 2009, 38(12):2159-2162
[9] 刘鑫, 张小勇, 陆艳杰, 等. AlN陶瓷与无氧铜的活性封接[J]. 真空电子技术, 2007(4):56-58 Liu Xin, Zhang Xiaoyong, Lu Yanjie, et al. Active brazing of AlN and oxygen-free copper[J]. Vacuum Electronics, 2007(4):56-58
[10] Chou T T, Tuan W H, Nishikawa H, et al. Brazing graphite to aluminum nitride for thermal dissipation purpose[J]. Advanced Engineering Materials, 2017, 19(7):1600876.
[11] Palit D, Meier A M. Reaction kinetics and mechanical properties in the reactive brazing of copper to aluminum nitride[J]. Journal of Materials Science, 2006, 41(21):7197-7209.
[12] 张玲艳, 秦明礼, 曲选辉, 等. AlN陶瓷与可伐合金的活性封接[J]. 真空电子技术, 2009(4):4-7 Zhang Lingyan, Qin Mingli, Qu Xuanhui,et al. Active brazing of AlN ceramic with Kovar alloy[J]. Vacuum Electronics, 2009(4):4-7
[13] Kara-Slimane A, Juve D, Leblond E, et al. Joining of AlN with metals and alloys[J]. Journal of the European Ceramic Society, 2000, 20(11):1829-1836.
[14] 朱成俊, 尚长沛. 采用AgCuTi活性钎料真空钎焊MgAl2O4透明陶瓷[J]. 焊接学报, 2015, 36(4):101-105 Zhu Chengjun, Shang Changpei. Vacuum brazing of MgAl2O4 transparent ceramics with AgCuTi active filler metal[J]. Transactions of the China Welding Institution, 2015, 36(4):101-105
