The 7A04 aluminum alloy and 304 stainless steel dissimilar materials are welded by continuous drive friction welding, and the joints were annealed at different temperature and different time. The burr morphology, tensile strength, fracture morphology, microstructure and micro-hardness of joints were analyzed. Using the appropriate process parameters can obtain good shape of the edge fin and better tensile strength, the microstructure of aluminum alloy of weld zone is dynamic recrystallization, grain refinement, and the structure is more dense than the substrate, element diffusion occurs on both sides of the bonding surface, the microhardness of weld zone is higher than that of the substrate. The tensile strength of the joints treated by 400℃×3 h annealing is obviously improved, different intermetallic compounds were formed at the interface, diffusion layer thickness increased slightly, the microhardness decreased.
FENG Jian
,
HAN Jing
,
ZHANG Xuemei
,
DAI Guangze
,
HAN Yuejiao
. Continuous drive friction welding and post welding heat treatment of 7A04 aluminum alloy and 304 stainless steel[J]. Transactions of The China Welding Institution, 2018
, 39(8)
: 11
-17
.
DOI: 10.12073/j.hjxb.2018390192
[1] 张丽娜, 刘敏, 蒋继英, 等. 铝及铝合金与钢的连接技术研究现状[J]. 航天制造技术, 2013(2):003 Zhang Lina, Liu Min, Jiang Jiying, et al. Research status of joining technology of aluminum and aluminum alloy and steel[J]. Aerospace Manufacturing Technology, 2013(2):003
[2] 万春芬, 周明召. 铝一钢异种材料焊接工艺的研究进展[J]. 热加工工艺, 2014, 43(3):8-11 Wan Chunfen, Zhou Mingzhao. Research progress on welding technology of dissimilar materials of aluminum-steel[J]. Hot Working Technology, 2014, 43(3):8-11
[3] 卢杰红, 曲文卿, 张雷. 铝合金与不锈钢的连接技术[J]. 航空制造技术, 2008(13):81-83 Lu Jiehong, Qu Wenqing, Zhang Lei. Joining technology of aluminum alloy and stainless steel[J]. Aeronautical Manufacturing Technology, 2008(13):81-83
[4] 王希靖, 李经纬, 张昌青, 等. 电解铝阳极导杆铝-钢相位摩擦焊工艺及力学性能[J]. 焊接学报, 2015, 36(9):83-86 Wang Xijing, Li Jingwei, Zhang Changqing, et al. Process and mechanical properties of aluminum-steel phase friction welding of electrolytic aluminum anode guide rod[J]. Transactions of the China Welding Institution, 2015, 36(9):83-86
[5] 张田仓, 栾国红. 纯铝-不锈钢异种材料惯性摩擦焊的研究[J]. 航空工艺技术, 1998(3):33-33 Zhang Tianchang, Luan Guohong. Study on inertia friction welding of dissimilar materials of pure aluminum-stainless steel[J]. Aeronautical Manufacturing Technology, 1998(3):33-33
[6] 王春桂. 异种金属耗材摩擦焊工艺研究[D]. 南京:南京理工大学, 2016.
[7] 赵衍华, 张丽娜, 孙秀京, 等. LF6铝合金与不锈钢异种金属惯性摩擦焊工艺技术研究[J]. 宇航材料工艺, 2016, 46(5):68-71 Zhao Yanhua, Zhang Lina, Sun Xiujing, et al. Study on the technology of inertia friction welding of dissimilar metals between LF6 aluminum alloy and stainless steel[J]. Aerospace Materials and Technology, 2016, 46(5):68-71
[8] Kannan P, Balamurugan K, Thirunavukkarasu K. Influence of silver interlayer in dissimilar 6061-T6 aluminum MMC and AISI 304 stainless steel friction welds[J]. The International Journal of Advanced Manufacturing Technology, 2015, 81(9-12):1743-1756.
[9] Kimura M, Kusaka M, Kaizu K, et al. Friction welding technique and joint properties of thin-walled pipe friction-welded joint between type 6063 aluminum alloy and AISI 304 austenitic stainless steel[J]. The International Journal of Advanced Manufacturing Technology, 2016, 82(1-4):489-499.
[10] 吴铭方, 司乃潮, 王敬, 等. 铁/铝扩散偶界面反应层生长机理分析[J]. 焊接学报, 2011, 32(5):29-32 Wu Mingfang, Si Naichao, Wang Jing, et al. Study on the growth mechanism of the interface reaction layer of Fe/Al diffusion couple[J]. Transactions of the China Welding Institution, 2011, 32(5):29-32
[11] 王希靖, 商献伟, 芝丽丽, 等. 大截面铸铝-铸钢摩擦焊接接头显微分析[J]. 焊接学报, 2010, 31(2):29-32 Wang Xijing, Shang XianWei, Zhi Lili, et al. The microstructure analysis of friction welded joint by large section cast aluminum and cast steel[J]. Transactions of the China Welding Institution, 2010, 31(2):29-32
[12] 钟群鹏, 赵子华. 断口学[M]. 北京:高等教育出版社, 2006.
