Study on high temperature low cycle fatigue behavior of P92 steel under 630℃

  • JING Hongyang ,
  • SU Dingbang ,
  • XU Lianyong ,
  • ZHAO Lei
Expand
  • 1. School of Materials Science and Engineering Tianjin University,Tianjin 300072, China;
    2. Tianjin Key Laboratory of Advanced Joining Technology, Tianjin 300072, China

Received date: 2016-12-15

  Online published: 2019-07-16

Abstract

P92 steel has been widely applied in high temperature components of power plants. With the development of the ultra supercritical power plants, the operating temperature of P92 steel has been promoted. The high temperature fatigue performance of P92 steel has a significant effect on the safety of power plants. Therefore, the fatigue test of P92 steel under 630℃ was conducted, and the effects of the strain amplitude and strain rate on the fatigue life was studied. In addition, the fatigue fracture mechanism for P92 steel was investigated by the fracture morphology analysis. The results indicated that P92 steel exhibited a cyclic softening behavior at high temperatures. The fatigue life decreased exponentially with the increasing of plastic strain amplitude. In contrast, the improvement of strain rate would promote the fatigue life. Furthermore, the fatigue fracture surface of P92 steel consisted of three zones, including fatigue source region, fatigue crack growth zone and fracture zone. The decrease of fatigue life at high strain amplitude was mainly induced by the increase of creep cavities and secondary cracks.

Cite this article

JING Hongyang , SU Dingbang , XU Lianyong , ZHAO Lei . Study on high temperature low cycle fatigue behavior of P92 steel under 630℃[J]. Transactions of The China Welding Institution, 2018 , 39(7) : 33 -36 . DOI: 10.12073/j.hjxb.2018390170

References

[1] 李聪成, 荆洪阳, 徐连勇, 等. 蠕变疲劳交互作用下裂纹萌生的有限元模拟[J]. 焊接学报. 2016, 37(08):5-8. Li Congcheng, Jing Hongyang, Xu Lianyong, et al. Numerical simulation of crack initiation under creep-fatigue interaction in P92 steel[J]. Transactions of the China Welding Institution, 2016, 37(08):5-8.
[2] Wang N, Tu S T, Xuan F Z. A novel prediction method of creep rupture life of 9-12% chromium ferritic steel based on abductive network[J]. Engineering Failure Analysis, 2013, 31:302-310.
[3] Samuel E I, Choudhary B K, Palaparti D P R, et al. Creep deformation and rupture behaviour of P92 steel at 923K[J]. Procedia Engineering, 2013, 55:64-69.
[4] Chang Y, Xu H, Ni Y, et al. The effect of multiaxial stress state on creep behavior and fracture mechanism of P92 steel[J]. Materials Science and Engineering:A, 2015, 636:70-76.
[5] 毛雪平, 陆道纲, 徐鸿, 等. P92钢高温低周疲劳的实验研究[J]. 原子能科学技术. 2010, 44(10):1212-1216. Mao Xueping, Lu Daogang, Xu Hong, et al. Experimental study on elevated temperature low cycle fatigue of P92 steel[J]. Atomic Energy Science and Technology, 2010, 44(10):1212-1216.
[6] Kannan R, Sankar V, Sandhya R, et al. Comparative evaluation of the low cycle fatigue behaviours of P91 and P92 steels[J]. Procedia Engineering, 2013, 55:149-153.
[7] 张振, 胡正飞, 范立坤, 等. 国产P92钢低周疲劳性能与断裂特征研究[J]. 动力工程学报. 2014, 34(04):330-336. Zhang Zhen, Hu Zhengfei, Fan Likun, et al. Low cycle fatigue and fracture properties of domestic P92 heat-resistant steels[J]. Journal of Chinese Society of Power Engineering, 2014, 34(04):330-336.
[8] Luo, Y R, Huang, C X, Tian, R H. Effect of strain rate on low cycle fatigue behaviors of high-strength structural steel[J]. Journal of Iron and Steel Research, 2013, 20(7):50-56.
[9] Park J S, Kim S J, Lee C S. Effect of W addition on the low cycle fatigue behavior of high Cr ferritic steels[J]. Materials Science and Engineering:A, 2001, 298(1-2):127-136.
Outlines

/