In order to study the distribution rule of residual stress of AZ31B magnesium alloy weld, The MSC.Mar was used to make a numerical simulation analysis of temperature, residual stress and strain field of DE-GMAW welding a circumferential weld of a diameter 200 mm, 6 mm thick magnesium alloy cylincle. It was found that the residual stress on weld and heat affected zone is larger, and gradually decreases away from the weld center. The longitudinal residual stress is greater than the transverse residual stress in most areas, but not include the most outside and inside weld areas. These results provide theoretical knowledge for the control of welding residual stress of magnesium alloy.
FANG Naiwen
,
WANG Liping
,
LI Liansheng
,
LI Rui
,
MA Qingjun
,
KONG Xiangqian
. Numerical simulation of DE-GMAW welding of magnesium alloy cylinder[J]. Transactions of The China Welding Institution, 2018
, 39(7)
: 29
-32
.
DOI: 10.12073/j.hjxb.2018390169
[1] 徐颖梅. 超声横波声各向异性在石料应力测试中的应用研究[D]. 镇江:江苏科技大学, 2007.
[2] 王明强, 朱永梅, 刘文欣. 有限元网格划分方法应用[J]. 机械设计与制造, 2004, (1):22-24. Wang Mingqiang, Zhu Yongmei, Liu Wenxin. The research on finite element mesh generation method[J]. Machinery Design& Manufacture, 2004, (1):22-24.[DOI:10.3969/j.issn.1672-1616.2004.01.006]
[3] 王瑞, 陈海霞, 王广峰. ANSYS有限元网格划分浅析[J]. 天津工业大学学报, 2002, 21(4):8-11. Wang Rui, Chen Haixia, Wang Guangfeng. Analysis of ANSYS finitelement mesh dividing[J]. Journal of Tianjin Polytechnic, 2002, 21(4):8-11.[DOI:10.3969/j.issn.1671-024X.2002.04.002]
[4] 迟露鑫, 麻永林, 刑淑清. 核电SA508-3钢后壁圆筒纵向焊接残余应力分析[J]. 焊接学报, 2012(6):59-62. Chi Luxin, Ma Yonglin, Xing Shuqing. Numerical simulation and experiments test of residual stress of longitudinal weld of thick SA508-3 steel pipe for nuclear power[J]. Transactions of the China Welding Institution, 2012(6):59-62.
