[1] Yu H, Tan S, Pan H, et al. High efficiency 600 W, 100 μm wavelength stabilized fiber coupled laser diode module for fiber laser pumping[C]//High-Power Diode Laser Technology XIX. 2021.
[2] Saha P, Datta S, Raza M S, et al. Effects of heat input on weld-bead geometry, surface chemical composition, corrosion behavior and thermal properties of fiber laser-welded nitinol shape memory alloy[J]. Journal of Materials Engineering and Performance, 2019, 28(5): 2754 - 2763.
[3] Sharma L, Chhibber R. Study of weld bead chemical, microhardness & microstructural analysis using submerged arc welding fluxes for linepipe steel applications[J]. Ceramics International, 2020, 46(15): 25677.
[4] Hao K, Wang H, Gao M, et al. Laser welding of AZ31B magnesium alloy with beam oscillation[J]. Journal of Materials Research and Technology, 2019, 8(3): 3044 - 3053.
[5] 赵乐, 曹政, 邹江林, 等. 高功率光纤激光深熔焊接匙孔的形貌特征[J]. 中国激光, 2020, 47(11): 1102005
Zhao Le, Cao Zheng, Zou Jianglin, et al. Keyhole morphological characteristics in high-power deep penetration fiber laser welding[J]. Chinese Journal of Lasers, 2020, 47(11): 1102005
[6] Quintino L, Costa A, Miranda R, et al. Welding with high power fiber lasers a preliminary study[J]. Materials and Design, 2007, 28(4): 1231 - 1237.
[7] 徐国建, 李响, 杭争翔, 等. 光纤激光及CO2激光焊接高强钢[J]. 激光与光电子学进展, 2014, 51(3): 031403
Xu Guojian, Li Xiang, Hang Zhengxiang, et al. Fiber laser and CO2 laser welding of high-strength steel[J]. Laser & Optoelectronics Progress, 2014, 51(3): 031403
[8] Li R, Wang T, Wang C, et al. A study of narrow gap laser welding for thick plates using the multi-layer and multi-pass method[J]. Optics & Laser Technology, 2014, 64: 172 - 183.
[9] Zhang B, Dong Y, Du Y, et al. Microstructure and formability performance of fiber laser welded 1.2 GPa grade hot-rolled TRIP steel joints[J]. Optics & Laser Technology, 2021, 143(34): 107 - 341.
[10] Shcheglov P Y, Gumenyuk A V, Gornushkin I B, et al. Vapor–plasma plume investigation during high-power fiber laser welding[J]. Laser Physics, 2013, 23(1): 016001.
[11] Kawahito Y, Kinoshita K, Matsumoto N, et al. Effect of weakly ionised plasma on penetration of stainless steel weld produced with ultra high power density fibre laser[J]. Science & Technology of Welding & Joining, 2013, 13(8): 749 - 753.
[12] Li S C, Chen G, Zhang M J, et al. Dynamic keyhole profile during high-power deep-penetration laser welding[J]. Journal of Materials Processing Technology, 2014, 214(3): 565 - 570.
[13] 韩雪, 赵宇, 邹江林, 等. 基于可视化观察的光纤激光深熔焊接羽辉形成原因分析[J]. 中国激光, 2020, 47(6): 0602004
Han Xue, Zhao Yu, Zou Jianglin, et al. Analysis of plume formation in fiber laser deep penetration welding based on visual observation[J]. Chinese Journal of Lasers, 2020, 47(6): 0602004
[14] Chen G, Zhang M, Zhao Z, et al. Measurements of laser-induced plasma temperature field in deep penetration laser welding[J]. Optics & Laser Technology, 2013, 45: 551 - 557.
[15] Cai Y, Heng H, Li F, et al. The influences of welding parameters on the metal vapor plume in fiber laser welding based on 3D reconstruction[J]. Optics & Laser Technology, 2018, 107: 1 - 7.
[16] Li M, Xiao R S, Zhou J L et al. A multiple synchronous imaging method for strong illuminants induced during a hot working process[J]. Laser Physics Letters, 2019, 16(6): 66003 - 66003.
[17] Zhang M, Zhang Z, Tang K, et al. Analysis of mechanisms of underfill in full penetration laser welding of thick stainless steel with a 10 kW fiber laser[J]. Optics & Laser Technology, 2018, 98: 97 - 105.
[18] 邹江林, 吴世凯, 肖荣诗, 等. 高功率光纤激光和CO2激光焊接熔化效率对比[J]. 中国激光, 2013, 40(8): 0803002
Zou Jianglin, Wu Shikai, Xiao Rongshi, et al. Comparison of melting efficiency in high power fiber laser and CO2 laser welding[J]. Chinese Journal of Lasers, 2013, 40(8): 0803002
[19] 张明军. 万瓦级光纤激光深熔焊接厚板金属蒸气行为与缺陷控制[D]. 长沙: 湖南大学, 2013.
Zhang Mingjun. Study on the behavior of metallic vapor plume and defects control during deep penetration laser welding of thick plate using 10-kW level high power fiber laser [D]. Changsha: Hunan University, 2013.
[20] Zou J L, Yang W X, Wu S K, et al. Effect of plume on weld penetration during high-power fiber laser welding[J]. Journal of Laser Applications, 2016, 28(2): 022033.
[21] Li S, Chen G, Zhang Y, et al. Investigation of keyhole plasma during 10 kW high power fiber laser welding[J]. Laser Physics, 2014, 24(10): 106003.
[22] Zhao L, Tsukamoto S, Arakane G, et al. Prevention of porosity by oxygen addition in fiber laser and fiber laser–GMA hybrid welding[J]. Science & Technology of Welding & Joining, 2014, 19(2): 91 - 97.
[23] Schmidt L, Schricker K, Bergmann J P, et al. Effect of local gas flow in full penetration laser beam welding with high welding speeds[J]. Applied Sciences, 2020, 10(5): 1 - 19.
[24] Bao H T, Liu J H, Liu k, et al. Effect of vacuum laser welding process parameters on penetration depth of AZ31 magnesium alloy and defect analysis[J]. Applied laser, 2008, 28(5): 570 - 577.
[25] 张高磊, 孔华, 邹江林, 等. 高功率光纤激光深熔焊接飞溅特性以及离焦量对飞溅的影响[J]. 中国激光, 2021, 48(22): 79 - 86
Zhang Gaolei, Kong Hua, Zou Jianglin, et al. Spatter characteristics of high-power fiber laser deep penetration welding and effect of defocusing amount[J]. Chinese Journal of Lasers, 2021, 48(22): 79 - 86
[26] Zou J L, Han X, Zhao Y, et al. Investigation on plume formation during fiber laser keyhole welding based on in-situ measurement of particles in plume[J]. Journal of Manufacturing Processes, 2021, 65(15): 153 - 160.
[27] Cui Bing, Song Longyu, Liu Zhangwei, et al. Study of the morphology and properties of diamond joints brazed with carbide-reinforced Cu-Sn-Ti filler metal[J]. China Welding, 2022, 31(3): 53 - 60
[28] Zou J L, Ha N, Xiao R S, et al. Interaction between the laser beam and keyhole wall during high power fiber laser keyhole welding[J]. Optics Express, 2017, 25(15): 17650 - 17656.
[29] 赵乐, 韩雪, 邹江林, 等. 光纤激光深熔焊接小孔形成过程的研究[J]. 激光与光电子学进展, 2020, 57(7): 227 - 233
Zhao Le, Han Xue, Zou Jianglin, et al. Research on formation process of keyhole during fiber laser deep penetration welding[J]. Laser & Optoelectronics Progress, 2020, 57(7): 227 - 233
[30] Zhang G L, Zhu B Q, Zou J L, et al. Correlation between the spatters and evaporation vapor on the front keyhole wall during fiber laser keyhole welding[J]. Journal of Materials Research and Technology, 2020, 9(6): 15143 - 15152.
[31] Greses J, Hilton P A, Barlow C Y, et al. Plume attenuation under high power Nd: yttritium aluminum garnet laser welding[J]. Journal of Laser Applications, 2004, 16(1): 9 - 15.
[32] Abe Y, Mizutani M, Kawahito Y, et al. Deep penetration welding with high-power laser under vacuum[J]. Trans Joining Weld Res Inst, 2010, 40(1): 9 - 15.
[33] Zou J L, Wu S K, Yang W X, et al. A novel method for observing the micro-morphology of keyhole wall during high-power fiber laser welding[J]. Materials & Design, 2016, 89(6.): 785 - 790.
[34] Fabbro R, Slimani S, Coste F, et al. Study of keyhole behaviour for full penetration Nd-Yag CW laser welding[J]. Journal of Physics D:Applied Physics, 2005, 38(12): 1881.
[35] Oiwa S, Kawahito Y, Mizutani M, et al. Effect of atmosphere above specimen on welding results during remote welding[J]. Journal of Laser Applications., 2011, 23(2): 022007.
[36] Lescoute E, Hallo L, Hébert D, et al. Experimental observations and modeling of nanoparticle formation in laser-produced expanding plasma[J]. Physics of Plasmas, 2008, 15(6): 63507.
[37] Shcheglov P Y, Uspenskiy S A, Gumenyuk A V, et al. Plume attenuation of laser radiation during high power fiber laser welding[J]. Laser Physics Letters, 2011, 8(6): 475 - 480.
[38] 牛小男, 崔丽, 王鹏, 等. 镍铝青铜过渡层对钛合金/不锈钢异种材料激光焊接头组织与力学性能的影响[J]. 焊接学报, 2022, 43(1): 42 - 47
Wang Xiaonan, Cui Li, Wang Peng, et al. Effect of nickel-aluminum bronze transition layer on microstructure and mechanical properties of laser welding head of titanium alloy/stainless steel dissimilar material[J]. Transactions of the China Welding Institution, 2022, 43(1): 42 - 47
