[1] 武传松, 孟祥萌, 陈姬, 等. 熔焊热过程与熔池行为数值模拟的研究进展[J]. 机械工程学报, 2018, 54(2): 1-15
Wu Chuansong, Meng Xiangmeng, Chen Ji, et al. Progress in numerical simulation of thermal processes and weld pool behaviors in fusion welding[J]. Journal of Mechanical Engineering, 2018, 54(2): 1-15
[2] 裴莹蕾, 单际国, 任家烈. 不锈钢薄板高速激光焊驼峰焊道形成倾向及其影响因素[J]. 金属学报, 2012, 48(12): 1431-1436
Pei Yinglei, Shan Jiguo, Ren Jialie. Study of humping tendency and affecting factors in high speed laser welding of stainless steel sheet[J]. Acta Metallurgica Sinica, 2012, 48(12): 1431-1436
[3] Deng S, Wang H P, Lu F, et al. Investigation of spatter occurrence in remote laser spiral welding of zinc-coated steels[J]. International Journal of Heat and Mass Transfer, 2019, 140: 269-280.
[4] Zhang C, Yu Y, Chen C, et al. Suppressing porosity of a laser keyhole welded Al-6Mg alloy via beam oscillation[J]. Journal of Materials Processing Technology, 2020, 278: 116382.
[5] Han Y, Han J, Chen Y, et al. Stability of fiber laser-MIG hybrid welding of high strength aluminum alloy[J]. China Welding, 2021, 30(3): 7-11.
[6] Otto A, Patschger A, Seiler M. Numerical and experimental investigations of humping phenomena in laser micro welding[J]. Physics Procedia, 2016, 83: 1415-1423.
[7] Zhang M, Liu T, Hu R, et al. Understanding root humping in high-power laser welding of stainless steels: a combination approach[J]. The International Journal of Advanced Manufacturing Technology, 2020, 106(11): 5353-5364.
[8] Bachmann M, Avilov V, Gumenyuk A, et al. Numerical simulation of full-penetration laser beam welding of thick aluminium plates with inductive support[J]. Journal of Physics D:Applied Physics, 2011, 45(3): 035201.
[9] Bachmann M, Avilov V, Gumenyuk A, et al. Experimental and numerical investigation of an electromagnetic weld pool support system for high power laser beam welding of austenitic stainless steel[J]. Journal of Materials Processing Technology, 2014, 214(3): 578-591.
[10] Cho W I, Woizeschke P. Analysis of molten pool dynamics in laser welding with beam oscillation and filler wire feeding[J]. International Journal of Heat and Mass Transfer, 2021, 164: 120623.
[11] Zhao H, Niu W, Zhang B, et al. Modelling of keyhole dynamics and porosity formation considering the adaptive keyhole shape and three-phase coupling during deep-penetration laser welding[J]. Journal of Physics D:Applied Physics, 2011, 44(48): 485302.
[12] Pang S, Chen X, Zhou J, et al. 3D transient multiphase model for keyhole, vapor plume, and weld pool dynamics in laser welding including the ambient pressure effect[J]. Optics and Lasers in Engineering, 2015, 74: 47-58.
[13] Pang S, Chen X, Shao X, et al. Dynamics of vapor plume in transient keyhole during laser welding of stainless steel: Local evaporation, plume swing and gas entrapment into porosity[J]. Optics and Lasers in Engineering, 2016, 82: 28-40.
[14] Lu F, Li X, Li Z, et al. Formation and influence mechanism of keyhole-induced porosity in deep-penetration laser welding based on 3D transient modeling[J]. International Journal of Heat and Mass Transfer, 2015, 90: 1143-1152.
[15] Li X, Lu F, Cui H, et al. Numerical modeling on the formation process of keyhole-induced porosity for laser welding steel with T-joint[J]. The International Journal of Advanced Manufacturing Technology, 2014, 72(1-4): 241-254.
[16] Huang L, Hua X, Wu D, et al. Effect of magnesium content on keyhole-induced porosity formation and distribution in aluminum alloys laser welding[J]. Journal of Manufacturing Processes, 2018, 33: 43-53.
[17] Huang L, Hua X, Wu D, et al. Numerical study of keyhole instability and porosity formation mechanism in laser welding of aluminum alloy and steel[J]. Journal of Materials Processing Technology, 2018, 252: 421-431.
[18] Shi L, Li X, Jiang L, et al. Numerical study of keyhole-induced porosity suppression mechanism in laser welding with beam oscillation[J]. Science and Technology of Welding and Joining, 2021, 26(5): 349-355.
[19] Zhang C, Li X, Gao M. Effects of circular oscillating beam on heat transfer and melt flow of laser melting pool[J]. Journal of Materials Research and Technology, 2020, 9(4): 9271-9282.
[20] Hugger F, Hofmann K, Kohl S, et al. Spatter formation in laser beam welding using laser beam oscillation[J]. Welding in the World, 2015, 59(2): 165-172.
[21] Chang B, Blackburn J, Allen C, et al. Studies on the spatter behaviour when welding AA5083 with a Yb-fibre laser[J]. The International Journal of Advanced Manufacturing Technology, 2016, 84(9): 1769-1776.
[22] Wu D, Hua X, Huang L, et al. Numerical simulation of spatter formation during fiber laser welding of 5083 aluminum alloy at full penetration condition[J]. Optics & Laser Technology, 2018, 100: 157-164.
[23] Hao Y, Chen N, Wang H P, et al. Effect of zinc vapor forces on spattering in partial penetration laser welding of zinc-coated steels[J]. Journal of Materials Processing Technology, 2021, 298: 117282.
[24] Hao Y, Wang H P, Sun Y, et al. The evaporation behavior of zinc and its effect on spattering in laser overlap welding of galvanized steels[J]. Journal of Materials Processing Technology, 2022, 306: 117625.
[25] Hao Y, Li L, Sun Y, et al. Dynamic behavior of keyhole and molten pool under different oscillation paths for galvanized steel laser welding[J]. International Journal of Heat and Mass Transfer, 2022, 192: 122947.
[26] Qi Y, Chen G, Liu D. Droplet spatter suppression in laser lap welding of galvanized sheets using additional coaxial annular laser source[J]. Optics & Laser Technology, 2022, 149: 107902.
[27] Gu H, Wei C, Li L, et al. Multi-physics modelling of molten pool development and track formation in multi-track, multi-layer and multi-material selective laser melting[J]. International Journal of Heat and Mass Transfer, 2020, 151: 119458.
[28] Yao L, Huang S, Ramamurty U, et al. On the formation of "Fish-scale" morphology with curved grain interfacial microstructures during selective laser melting of dissimilar alloys[J]. Acta Materialia, 2021, 220: 117331.
[29] Fallah V, Amoorezaei M, Provatas N, et al. Phase-field simulation of solidification morphology in laser powder deposition of Ti–Nb alloys[J]. Acta Materialia, 2012, 60(4): 1633-1646.
[30] Mi G, Xiong L, Wang C, et al. Two-dimensional phase-field simulations of competitive dendritic growth during laser welding[J]. Materials & Design, 2019, 181: 107980.
[31] Geng S, Jiang P, Shao X, et al. Comparison of solidification cracking susceptibility between Al-Mg and Al-Cu alloys during welding: A phase-field study[J]. Scripta Materialia, 2018, 150: 120-124.
[32] Geng S, Jiang P, Shao X, et al. Effects of back-diffusion on solidification cracking susceptibility of Al-Mg alloys during welding: A phase-field study[J]. Acta Materialia, 2018, 160: 85-96.
[33] Ao X, Xia H, Liu J, et al. Simulations of microstructure coupling with moving molten pool by selective laser melting using a cellular automaton[J]. Materials & Design, 2020, 185: 108230.
[34] Shi R, Khairallah S A, Roehling T T, et al. Microstructural control in metal laser powder bed fusion additive manufacturing using laser beam shaping strategy[J]. Acta Materialia, 2020, 184: 284-305.
[35] Liu S, Hong K M, Shin Y C. A novel 3D cellular automata-phase field model for computationally efficient dendrite evolution during bulk solidification[J]. Computational Materials Science, 2021, 192: 110405.
[36] Zhang Z, Wu C. Monte Carlo simulation of grain growth in heat-affected zone of 12wt.% Cr ferritic stainless steel hybrid welds[J]. Computational Materials Science, 2012, 65: 442-449.
[37] Gleason G, Sunny S, Mathews R, et al. Numerical investigation of the transient interfacial material behavior during laser impact welding[J]. Scripta Materialia, 2022, 208: 114325.
[38] Sunny S, Gleason G, Mathews R, et al. Simulation of laser impact welding for dissimilar additively manufactured foils considering influence of inhomogeneous microstructure[J]. Materials & Design, 2021, 198: 109372.
[39] 桂晓燕, 张艳喜, 游德勇, 等. 激光电弧复合焊接顺序对304不锈钢T形接头影响的模拟试验分析[J]. 焊接学报, 2021, 42(12): 34-39
Gui Xiaoyan, Zhang Yanxi, You Deyong, et al. Numerical simulation and test for influence of laser arc hybrid welding sequence on 304 stainless steel T-joint[J]. Transactions of the China Welding Institution, 2021, 42(12): 34-39
[40] Sun J, Liu X, Tong Y, et al. A comparative study on welding temperature fields, residual stress distributions and deformations induced by laser beam welding and CO2 gas arc welding[J]. Materials & Design, 2014, 63: 519-530.
[41] 逯世杰, 郑颖, 王虎, 等. SUS304 不锈钢薄板激光焊与惰性气体保护焊的焊接变形和残余应力的比较[J]. 激光杂志, 2019, 40(11): 144-149
Lu Shijie, Zheng Ying, Wang Hu, et al. A comparative study on welding deformations and residual stress distribution of SUS304 stainless steel induced by laser beam welding and metal inert-gas welding[J]. Laser Journal, 2019, 40(11): 144-149
[42] Huang H, Tsutsumi S, Wang J, et al. High performance computation of residual stress and distortion in laser welded 301L stainless sheets[J]. Finite Elements in Analysis and Design, 2017, 135: 1-10.
[43] Xu G, Pan H, Liu P, et al. Finite element analysis of residual stress in hybrid laser-arc welding for butt joint of 12 mm-thick steel plate[J]. Welding in the World, 2018, 62(2): 289-300.
[44] Yan S, Meng Z, Chen B, et al. Prediction of temperature field and residual stress of oscillation laser welding of 316LN stainless steel[J]. Optics & Laser Technology, 2022, 145: 107493.
[45] Deng D, Kiyoshima S. Numerical simulation of residual stresses induced by laser beam welding in a SUS316 stainless steel pipe with considering initial residual stress influences[J]. Nuclear Engineering and Design, 2010, 240(4): 688-696.
[46] Elmesalamy A, Francis J A, Li L. A comparison of residual stresses in multi pass narrow gap laser welds and gas-tungsten arc welds in AISI 316L stainless steel[J]. International Journal of Pressure Vessels and Piping, 2014, 113: 49-59.
[47] 窦恩惠. 铝锂合金T型接头双光束激光焊接工艺及变形控制[D]. 天津: 天津大学, 2018.
Dou Enhui. Two-side and two-beam laser welding process and deformation control of aluminum-lithium alloy T-welded joints[D]. Tianjin: Tianjin University, 2018.
[48] Li C, Ding F, Yu X, et al. Residual stress and welding distortion of Al/steel butt joint by arc-assisted laser welding-brazing[J]. Transactions of Nonferrous Metals Society of China, 2019, 29(4): 692-700.
