为了更加高效、精准的获得工艺参数对高功率激光焊接工艺特性的影响规律，提出了激光焊接特性分析用高通量测试方法，并借助高速摄影和图像处理技术对测试过程中的光致羽辉和飞溅进行了统计分析. 结果表明，随着激光功率增加，焊接过程中飞溅数量与波动程度增加，对应焊后表面成形质量变差，内部裂纹增加；对于万瓦级激光焊接，相较于正离焦焊接，负离焦量焊接时的焊缝成形更为优异，焊接过程飞溅数量得到有效抑制，熔深波动程度也得到明显改善；实际焊接结果与激光焊接特性高通量测试结果高度一致，这说明基于高通量测试方法的激光焊接特性分析方法可以真实、快速的反映出工艺参数变化时对焊接特性的影响规律，是一种切实可行的激光焊接特性分析新方法.
To more efficiently and accurately obtain the influence law of process parameters on the process characteristics of high-power laser welding, a new high-throughput laser welding test method is proposed. With the help of high-speed photography and image processing technology, the photoinduced plume and spatter in the test process are statistically analyzed. The results show that the increase of laser power increases the number and fluctuation of spatter in the welding process. Correspondingly, the surface forming quality becomes worse, and the internal crack increases after welding. For 10000-watt class laser welding, compared with positive defocus welding, the weld formation in negative defocus welding is better, the amount of spatter in the welding process can be effectively restrained, and the sawtooth melting width and penetration fluctuation can be significantly improved. The actual welding results are highly consistent with the test results of "sawtooth plate," which shows that the new method of high-throughput laser welding characteristics test can truly and quickly obtain the influence law of continuous change of process parameters on the welding process. It is a practical new method to study the characteristics of laser welding.
[1] 雷振, 徐良, 徐富家, 等. 激光-电弧复合焊接技术国内研究现状及典型应用[J]. 焊接, 2018(12): 1 ? 6
Lei Zhen, Xu Liang, Xu Fujia, et al. Typical applications and research states of laser-arc hybrid welding technology[J]. Welding & Joining, 2018(12): 1 ? 6
[2] 王磊, 许雪宗, 王克鸿, 等. 中厚板7A52铝合金光纤激光焊接接头组织与性能[J]. 焊接学报, 2020, 41(10): 28 ? 31
Wang Lei, Xu Xuezong, Wang Kehong, et al. Microstructure and mechanical properties of fiber laser beam welded 7A52 alloy joiint[J]. Transactions of the China Welding Institution, 2020, 41(10): 28 ? 31
[3] Turichin G, Tsibulskiy I, Kuznetsov M, et al. Influence ofthe gap width on the geometry of the welded joint in hy-brid laser-arc welding[J]. Physics Procedia, 2015, 78: 14 ? 23.
[4] Zhang M, Zhang Z, Tang K, et al. Analysis of mechanisms of underfill in full penetration laser welding of thick stainless steel with a 10 kW fiber laser[J]. Optics and Laser Technology, 2018, 98: 97 ? 105.
[5] 黄瑞生, 杨义成, 蒋宝, 等. 超高功率激光-电弧复合焊接特性分析[J]. 焊接学报, 2019, 40(12): 73 ? 77
Huang Ruisheng, Yang Yicheng, Jiang Bao, et al. Analysisof welding characteristics of ultra-high power laser-arc hybrid welding[J]. Transactions of the China Welding Institution, 2019, 40(12): 73 ? 77
[6] Shcheglov P Yu, Uspenskiv S A, Gumenvuk A V, et al. Plume attenuation of laser radiation during high power fiber laser welding[J]. Laser Physics Letters, 2011, 8(6): 475 ? 780.
[7] Zhao H, Niu W, Zhang B, et al. Modelling of keyhole dynamics and porosity formation considering the adaptive keyhole shape and three-phase coupling during deep-penetration laser welding[J]. Journal of Physics D-Applied Physics, 2011, 44(48): 485302.
[8] Kawahito Y, Matsumoto N, Abe Y, et al. Relationship of laser absorption to keyhole behavior in high power fiber laser welding of stainless steel and aluminum alloy[J]. Journal of Materials Processing Technology, 2011, 211(10): 1563 ? 1568.
[9] Artinov A, Bakir N, Bachmann M, et al. On the search for the origin of the bulge effect in high power laser beam welding[J]. Journal of Laser Applications, 2019, 31(2): 022413.
[10] 赵雷, 王辉, 杨丽霞, 等. Fe-Co-Ni系组合合金热等静压高通量制备方法初探[J]. 金属学报, 2021, 57(12): 1627 ? 1636
Zhao Lei, Wang Hui, Yang Lixia, et al. First exploration of hot isostatic pressing high-throughput synthesis on Fe-Co-Ni combinatorial alloy[J]. Acta Metallurgica Sinica, 2021, 57(12): 1627 ? 1636
[11] 冯中沛. 基于高通量技术的超导组合薄膜制备及其物性研究[D]. 北京: 中国科学院大学(中国科学院物理研究所), 2019.
Feng Zhongpei. High-through investigations of superconducting combinatorial films. [D]. Beijing: Chinese academy of Sciences(Institute of physiccs), 2019.
[12] 王星星, 何鹏, 李帅, 等. 高通量方法在钎焊领域的应用现状[J]. 焊接学报, 2021, 42(1): 1 ? 7
Wang Xingxing, He Peng, Li Shuai, et al. Application of high-throughput methods in the field of brazing[J]. Transactions of the China Welding Institution, 2021, 42(1): 1 ? 7
[13] 聂鑫, 杨义成, 黄瑞生, 等. 30 kW光纤激光焊接铝合金离焦量对匙孔行为的影响[J]. 焊接, 2020(7): 41 ? 47
Nie Xin, Yang Yicheng, Huang Ruisheng, et al. Effect of defocusing amount on keyhole behavior in 30 kW fiber laser welding of aluminum alloy[J]. Welding & Joining, 2020(7): 41 ? 47
[14] Jiang Z, Hua X, Huang L, et al. Double-sided hybrid laser-MIG welding plus MIG welding of 30-mm-thick aluminium alloy[J]. The International Journal of Advanced Manufacturing Technology, 2018, 97: 903 ? 913.
[15] Zhang M, Chen G, Yu Z, et al. Optimization of deep penetration laser welding of thick stainless steel with a 10 kW fiber laser[J]. Materials & Design, 2014, 53: 568 ? 576.
