[1] Singh P S, Liang Z, Pharr G M, et al. Creep of a thermally stable nanocrystalline nickel tungsten alloy as measured by high temperature nanoindentation[J]. Materials Science and Engineering:A, 2020, 784: 139309.
[2] Ravi Kiran U, Prabhu G, Nandy T K. Cooling rate effects on microstructure and mechanical behaviour of tungsten heavy alloys[J]. Materials Today:Proceedings, 2020, 26: 1631 ? 1637.
[3] Laas T, Laas K, Paju J, et al. Behaviour of tungsten alloy with iron and nickel under repeated high temperature plasma pulses[J]. Fusion Engineering and Design, 2020, 151: 111408.
[4] Jiao Z, Kang R, Dong Z, et al. Microstructure characterization of W-Ni-Fe heavy alloys with optimized metallographic preparation method[J]. International Journal of Refractory Metals and Hard Materials, 2019, 80: 114 ? 122.
[5] Pasalic M, Rustempasic F, Iyengar S, et al. Fatigue testing and microstructural characterization of tungsten heavy alloy Densimet 185[J]. International Journal of Refractory Metals and Hard Materials, 2014, 42: 163 ? 168.
[6] Ding L, Xiang D P, Pan Y L, et al. Mechanical properties and microstructural evolution of Mo-Co-co-strengthened W-Ni-Fe alloys by spark plasma sintering[J]. Journal of Alloys and Compounds, 2017, 712: 593 ? 598.
[7] Tang D, Zou S, Yan L. Influence of microelement Hf on microstructure, mechanical properties and shielding effect of W-Ni-Fe alloy[J]. Journal of Alloys and Compounds, 2017, 724: 1176 ? 1183.
[8] Prado J, Sánchez M, Wirtz M, et al. High heat flux performance of W-Eurofer brazed joints[J]. Journal of Nuclear Materials, 2018, 499: 225 ? 232.
[9] Das J, Appa Rao G, Pabi S K. Microstructure and mechanical properties of tungsten heavy alloys[J]. Materials Science and Engineering:A, 2010, 527(29-30): 7841 ? 7847.
[10] Batra I S, Kale G B, Saha T K, et al. Diffusion bonding of a Cu–Cr–Zr alloy to stainless steel and tungsten using nickel as an interlayer[J]. Materials Science and Engineering:A, 2004, 369(1-2): 119 ? 123.
[11] Vercruysse F, Celada-Casero C, Linke B M, et al. The effect of Nb on the strain rate and temperature dependent behaviour of quenching & partitioning steels[J]. Materials Science and Engineering:A, 2021, 800: 140293.
[12] Cui B, Yan P P, Du Q B, et al. The welding application of high strength steels used in engineering machinery[J]. China Welding, 2021, 30(1): 57 ? 64.
[13] Chen W, Gao P, Wang S, et al. Strengthening mechanisms of Nb and V microalloying high strength hot-stamped steel[J]. Materials Science and Engineering:A, 2020, 797: 140115.
[14] Prado J, Sánchez M, Wirtz M, et al. Impact of thermal fatigue on W–W brazed joints for divertor components[J]. Journal of Materials Processing Technology, 2018, 252: 211 ? 216.
[15] Tejado E, Prado J, Tarancón S, et al. Thermomechanical characterisation of W-Eurofer 97 brazed joints[J]. Journal of Nuclear Materials, 2020, 542: 152504.
[16] Huang P, Wang Y, Peng H, et al. Diffusion bonding W and RAFM-steel with an Fe interlayer by hot isostatic pressing[J]. Fusion Engineering and Design, 2020, 158: 111796.
[17] Lu C, Wang Y, Lei X, et al. Influence of Fe-W intermetallic compound on fracture behavior of steel/tungsten HIP diffusion bonding joint: Experimental investigation and first-principles calculation[J]. Journal of Manufacturing Processes, 2020, 55: 131 ? 142.
[18] Yang J, Wang Y, Huang J, et al. First-principles calculations on Ni/W interfaces in steel/Ni/W hot isostatic pressure diffusion bonding layer[J]. Applied Surface Science, 2019, 475: 906 ? 916.
[19] Yan H, Fan J, Han Y, et al. Vacuum diffusion bonding W to W-Cu composite: Interfacial microstructure and mechanical properties[J]. Vacuum, 2019, 165: 19 ? 25.
[20] Wang J C, Huang J, Sun H, et al. Effect of deuterium on bonding quality of W/Ti/steel HIP joints in first wall application[J]. Fusion Engineering and Design, 2019, 138: 313 ? 320.
[21] Tokitani M, Hamaji Y, Hiraoka Y, et al. Deformation and fracture behavior of the W/ODS-Cu joint fabricated by the advanced brazing technique[J]. Fusion Engineering and Design, 2019, 146: 1733 ? 1736.
[22] Yang L, Jiang X, Sun H, et al. Interfacial reaction and microstructure investigation of TC4/V/Cu/Co/316L diffusion-bonded joints[J]. Materials Letters, 2020, 261: 127140.
[23] Wang G, Sun X, Xu J, et al. Pressureless thermal diffusion bonding of transparent AlON ceramics by using a powder interlayer of parent material[J]. Scripta Materialia, 2019, 171: 118 ? 121.
[24] Pan H, Liu B, Guo Y, et al. An investigation on diffusion bonding of Zircaloy-4 and 304L stainless steel with Ti and Ag multiple interlayers[J]. Materials Letters, 2019, 240: 185 ? 188.
[25] Cavaleiro A J, Ramos A S, Braz Fernandes F M, et al. Follow-up structural evolution of Ni/Ti reactive nano and microlayers during diffusion bonding of NiTi to Ti6Al4V in a synchrotron beamline[J]. Journal of Materials Processing Technology, 2020, 275: 116354.
[26] Bachurina D, Suchkov A, Kalin B, et al. Joining of tungsten with low-activation ferritic–martensitic steel and vanadium alloys for demo reactor[J]. Nuclear Materials and Energy, 2018, 15: 135 ? 142.
[27] Basuki W W, Aktaa J. Investigation of tungsten/Eurofer 97 diffusion bonding using Nb interlayer[J]. Fusion Engineering and Design, 2011, 86(9-11): 2585 ? 2588.
[28] Basuki W W, Aktaa J. Diffusion bonding between W and Eurofer 97 using V interlayer[J]. Journal of Nuclear Materials, 2012, 429(1-3): 335 ? 340.
[29] Ma Y, Zhu W, Cai Q, et al. Microstructural evolution and mechanical properties in the partial transient liquid phase diffusion bonding of tungsten to steel[J]. International Journal of Refractory Metals and Hard Materials, 2018, 73: 91 ? 98.
[30] Cai Q, Liu W, Ma Y, et al. Effect of joining temperature on the microstructure and strength of W–steel HIP joints with Ti/Cu composite interlayer[J]. Journal of Nuclear Materials, 2018, 507: 198 ? 207.
[31] Cai Q, Liu W, Zhao Z, et al. Investigation of tungsten/steel diffusion bonding with Ni–Fe cladding on tungsten substrate[J]. Fusion Engineering and Design, 2017, 125: 189 ? 194.
[32] Cai Q, Liu W, Ma Y, et al. Microstructure, residual stresses and mechanical properties of diffusion bonded tungsten–steel joint using a V/Cu composite barrier interlayer[J]. International Journal of Refractory Metals and Hard Materials, 2015, 48: 312 ? 317.
[33] Basuki W W, Aktaa J. Process optimization for diffusion bonding of tungsten with Eurofer 97 using a vanadium interlayer[J]. Journal of Nuclear Materials, 2015, 459: 217 ? 224.
[34] 陈帅, 王玥, 杨健, 等. V/Nb 复合中间层热等静压扩散连接钢/钨接头的组织与性能[J]. 焊接学报, 2020, 41(11): 47 ? 53
Chen Shuai, Wang Yue, Yang Jian, et al. Microstructure and properties of hot isostatic pressing diffusion bonding steel/tungsten joint with V/Nb composite interlayer[J]. Thansactions of the China Welding Institution, 2020, 41(11): 47 ? 53
[35] Liu W, Pang X, Cai Q, et al. Fabrication of W/steel joint using hot isostatic pressing with Ti/Cu/Ti liquid forming interlayer[J]. Fusion Engineering and Design, 2018, 135: 59 ? 64.
[36] Liu W, Wang Z, Ma Y, et al. Investigation of tungsten/steel brazing using Ta and Cu interlayer[J]. Fusion Engineering and Design, 2016, 113: 102 ? 108.
[37] Liu W, Sheng Q, Ma Y, et al. Interfacial microstructures, residual stress and mechanical analysis of hot isostatic pressing diffusion bonded joint of 93W–4.9Ni–2.1Fe alloy and 30CrMnSiNi2A steel[J]. Fusion Engineering and Design, 2020, 156: 111602.
[38] Wang Y, Chen S, Lei X, et al. Interfacial structure and formation mechanism of tungsten/steel HIP diffusion bonding joints using Ni interlayer[J]. Journal of Manufacturing Processes, 2020, 52: 235 ? 246.
[39] Rieth M, Dudarev S L, Gonzalez de Vicente S M, et al. Recent progress in research on tungsten materials for nuclear fusion applications in Europe[J]. Journal of Nuclear Materials, 2013, 432(1-3): 482 ? 500.
[40] Wang Y, Yang J, Huang J, et al. Hot isostatic diffusion bonding tungsten alloy and high-strength steel Part I: Design and preparation of Ni-Si-B interlayer by magnetron sputtering[J]. Journal of Manufacturing Processes, 2018, 35: 360 ? 367.
[41] Zhu W, Qiang J, Wang Y, et al. A Ti-Fe-Sn thin film assembly for joining tungsten and reduced activation ferritic-martensitic steels[J]. Materials & Design, 2017, 125: 55 ? 61.
[42] Dourandish M, Simchi A, Hokamoto K, et al. Interface formation and bond strength in 3Y-TZP/Cr composite bilayers produced by sinter–joining[J]. Materials Science and Engineering:A, 2010, 527(3): 449 ? 453.
[43] Firouzdor V, Simchi A, Kokabi A H. An investigation of the densification and microstructural evolution of M2/316L stepwise graded composite during co-sintering[J]. Journal of Materials Science, 2007, 43(1): 55 ? 63.
[44] Liu W, Zhang L, Ma Y, et al. Low temperature co–sintering of tungsten alloy/steel composite structure[J]. International Journal of Refractory Metals and Hard Materials, 2020, 90: 105224.
[45] Prado J, Sánchez M, Stan G, et al. Effect of Cr and V coatings on W base material in W-Eurofer brazed joints for fusion applications[J]. Fusion Engineering and Design, 2020, 159: 111748.
[46] Chehtov T, Aktaa J, Kraft O. Mechanical characterization and modeling of brazed Eurofer-tungsten-joints[J]. Journal of Nuclear Materials, 2007, 367-370: 1228 ? 1232.
[47] Oono N, Noh S, Iwata N, et al. Microstructures of brazed and solid-state diffusion bonded joints of tungsten with oxide dispersion strengthened steel[J]. Journal of Nuclear Materials, 2011, 417(1-3): 253 ? 256.
[48] Sánchez M, Garrido M A, Múnez C J, et al. Analysis of the brazeability of W–W joints using a high temperature Ni-based alloy[J]. Materials & Design, 2014, 54: 900 ? 905.
[49] Shang J, Yan J, Li N. Brazing W and Fe–Ni–Co alloy using Ag–28Cu and Ag–27Cu–3.5Ti fillers[J]. Journal of Alloys and Compounds, 2014, 611: 91 ? 95.
[50] Prado J, Sánchez M, Ruiz A, et al. Effect of brazing temperature, filler thickness and post brazing heat treatment on the microstructure and mechanical properties of W-Eurofer joints brazed with Cu interlayers[J]. Journal of Nuclear Materials, 2020, 533: 152117.
[51] Prado J, Sánchez M, Antusch S, et al. Development of a brazing procedure to join W-2Y2O3 and W-1TiC PIM materials to Eurofer[J]. Physica Scripta, 2020, T171: 014022.
[52] Prado J, Sánchez M, Ure?a A. Wettability study of a Cu-Ti alloy on tungsten and Eurofer substrates for brazing components of DEMO fusion reactor[J]. Materials & Design, 2016, 99: 93 ? 101.
[53] Prado J, Sánchez M, Ure?a A. Evaluation of mechanically alloyed Cu-based powders as filler alloy for brazing tungsten to a reduced activation ferritic-martensitic steel[J]. Journal of Nuclear Materials, 2017, 490: 188 ? 196.
[54] Prado J, Roldán M, Sánchez M, et al. Interfacial characterization by TEM and nanoindentation of W-Eurofer brazed joints for the first wall component of the DEMO fusion reactor[J]. Materials Characterization, 2018, 142: 162 ? 169.
[55] Zhu D, Xu H, Dong D, et al. Brazing of (TiB + Y2O3) reinforced titanium matrix composites using CuTiZrNi amorphous filler alloy[J]. Vacuum, 2020, 174: 109212.
[56] Xia Y, Dong H, Zhang R, et al. Interfacial microstructure and shear strength of Ti6Al4V alloy/316 L stainless steel joint brazed with Ti33.3Zr16.7Cu50?xNix amorphous filler metals[J]. Materials & Design, 2020, 187: 108380.
[57] Xia Y, Dong H, Li P. Brazing TC4 titanium alloy/316L stainless steel joint with Ti50-xZrxCu39Ni11 amorphous filler metals[J]. Journal of Alloys and Compounds, 2020, 849: 156650.
[58] Li C, Zhang K, Mao X, et al. Microstructure and mechanical properties of the AlON / Ti6Al4V active element brazing joint[J]. Materials Science and Engineering:A, 2020, 793: 139859.
[59] Xia Y, Dong H, Hao X, et al. Vacuum brazing of Ti6Al4V alloy to 316L stainless steel using a Ti-Cu-based amorphous filler metal[J]. Journal of Materials Processing Technology, 2019, 269: 35 ? 44.
[60] Zhang T, Yang X, Miao K, et al. Microstructure evolution and brazing mechanism of Ti5Si3/Ti3Al composite and Ni-based superalloy joints using Ti-Zr-Cu-Ni filler alloy[J]. Materials Science and Engineering:A, 2018, 713: 28 ? 34.
[61] Dong H, Yang Z, Wang Z, et al. CuTiNiZrV amorphous alloy Foils for vacuum brazing of TiAl alloy to 40Cr steel[J]. Journal of Materials Science & Technology, 2015, 31(2): 217 ? 222.
[62] Wang J B, Lian Y Y, Feng F. Microstructure of the tungsten and reduced activation ferritic-martensitic steel joint brazed with an Fe-based amorphous alloy[J]. Fusion Engineering and Design, 2019, 138: 164 ? 169.
[63] Bachurina D, Suchkov A, Filimonov A, et al. High-temperature brazing of tungsten with steel by Cu-based ribbon brazing alloys for DEMO[J]. Fusion Engineering and Design, 2019, 146: 1343 ? 1346.
[64] 杨宗辉, 沈以赴, 初雅杰, 等. 钴/镍复合中间层真空扩散连接钨与钢[J]. 焊接学报, 2020, 41(3): 54 ? 58
Yang Zonghui, Shen Yifu, Chu Yajie, et al. Tungsten/steel vacuum diffusion bonding using Co/Ni composite interlayer[J]. Thansactions of the China Welding Institution, 2020, 41(3): 54 ? 58
[65] 杨宗辉, 沈以赴, 初雅杰, 等. Cu/W-Ni-Co/Ni多中间层的钨/钢扩散连接[J]. 稀有金属材料与工程, 2015, 44(344): 192 ? 196
Yang Zonghui, Shen Yifu, Chu Yajie, et al. Diffusion bonding between tungsten and steel with Cu/W-Ni-Co/Ni multi-interlayer[J]. rare metal materials and engineering, 2015, 44(344): 192 ? 196
[66] 徐振钦, 杨宗辉. 异种材料焊接接头热应力缓冲中间层的研究现状[J]. 机械工程材料, 2013, 37(301): 10 ? 14,19
Xu Zhenqin, Yang Zonghui. Research actuality of thermal stress relaxation interlayer for dissimilar materials joints[J]. Materials for Mechanical Engineering, 2013, 37(301): 10 ? 14,19
[67] Wang Y, Wang W, Ye Z, et al. Reactive composite-diffusing brazing of Cf/SiC composite and stainless steel with (Cu–15Ti)+C filler material[J]. Materials Science and Engineering:A, 2020, 788: 139582.
[68] Wang W, Fan D, Huang J, et al. Microstructural mechanism and mechanical properties of Cf/SiC composite/TC4 alloy joints composite-diffusion brazed with TiZrCuNi?+?TiCp composite filler[J]. Materials Science and Engineering:A, 2018, 728: 1 ? 9.
[69] Cui B, Huang J, Cai C, et al. Microstructures and mechanical properties of Cf/SiC composite and TC4 alloy joints brazed with (Ti–Zr–Cu–Ni)+W composite filler materials[J]. Composites Science and Technology, 2014, 97: 19 ? 26.
[70] Xu Y X, Qiu X M, Wang S Y, et al. Interfacial microstructure and mechanical properties of tungsten based powder alloy and superalloy GH907 diffusion brazing joint with Cu-Ni-V-Ti interlayer[J]. Vacuum, 2021, 184: 109793.
[71] Cai Q S, Zhu W T, Ma Y Z, et al. Rational design of composite interlayer for diffusion bonding of tungsten–steel joints[J]. International Journal of Refractory Metals and Hard Materials, 2018, 70: 155 ? 161.
