[1] Lan L, Qiu C, Zhao D, et al. Microstructural characteristics and toughness of the simulated coarse-grained heat affected zone of high strength low carbon bainitic steel[J]. Materials Science and Engineering: A, 2011, 529: 192 ? 200.
[2] 张熹, 董现春, 陈延清, 等. Q690CFD钢粗晶区再热脆化研究[J]. 钢铁, 2010, 45(11): 86 ? 89
Zhang Xi, Dong Xianchun, Chen Yanqing, et al. Study on reheat embitterment in coarse grain region of heat affected zone of Q690CFD steel[J]. Iron & Steel, 2010, 45(11): 86 ? 89
[3] Liu B, Qu J X, Sun W J. Effects of thermal cycle on mechanical properties and fract-ography in HAZ of HQ130 steel[J]. Acta Me-tallurgica Sinica (English Letters), 2004, 17(3): 274 ? 278.
[4] Kim S, Kang K, Lee C. Variation in microstructures and mechanical properties in the coarse-grained heat-affected zone of low-alloy steel with boron content[J]. Materials Science and Engineering: A, 2013, 559: 178 ? 186.
[5] 张楠, 田志凌, 张书彦, 等. 700 MPa微合金高强钢焊接软化机理及解决方案[J]. 钢铁研究学报, 2019, 31(3): 318 ? 326
Zhang Nan, Tian Zhiling, Zhang Shuyan, et al. Welding softening mechanism and solution of 700 MPa micro alloy high strength steel[J]. Journal of Iron and Steel Research, 2019, 31(3): 318 ? 326
[6] 李学军, 黄坚, 潘华, 等. QP1180高强钢薄板激光焊接接头的组织与成形性能[J]. 中国激光, 2019, 46(3): 72 ? 79
Li Xuejun, Huang Jian, Pan Hua, et al. Micr-ostructure and forming performance of QP1180 high strength steel sheet laser welded joint[J]. China Laser, 2019, 46(3): 72 ? 79
[7] 雷振, 王旭友, 滕彬, 等. JFE980S高强钢焊接接头软化分析[J]. 焊接学报, 2010, 31(11): 33 ? 37
Lei Zhen, Wang Xuyou, Teng Bin, et al. Sof-tening analysis of welded joints in high strength steel[J]. Transactions of the China Welding Institution, 2010, 31(11): 33 ? 37
[8] 蔡啸涛. Q690MPa级高强钢焊接方法与工艺要点分析[J]. 科技创新导报, 2018, 15(3): 112 ? 114
Cai Xiaitao. Analysis on welding method and process points of Q690MPa high strength ste-el[J]. Science and Technology Innovation Guide, 2018, 15(3): 112 ? 114
[9] 安同邦, 田志凌, 单际国, 等. 后热温度对1 000 MPa级高强钢焊缝组织与性能的影响[J]. 机械工程学报, 2015, 51(4): 40 ? 46
An Tongbang, Tian Zhiling, Shan Jiguo, et al. Effect of post-weld heat treatment temperature on weld microstructure and properties of 1000MPa high strength steel[J]. Journal of Mechanical Engineering, 2015, 51(4): 40 ? 46
[10] 范成磊, 方洪渊, 田应涛, 等. 随焊冲击碾压对LY12CZ铝合金接头组织和性能的影响[J]. 材料工程, 2004(10): 24 ? 28
Fan Chenglei, Fang Hongyuan, Tian Yingtao, et al. Effect of impact rolling with welding on microstructure and properties of LY12CZ aluminum alloy joints[J]. Materials Engineering, 2004(10): 24 ? 28
[11] 管建军, 杨男, 钟宏远, 等. 随焊加载冷源或位移控制载荷的无应力焊接方法[J]. 焊接学报, 2020, 41(1): 91 ? 96
Guan Jianjun, Yang Nan, Zhong Hongyuan, et al. Principle of stress-free welding with cold source or displacement-controled load[J]. Transactions of the China Welding Institution, 2020, 41(1): 91 ? 96
[12] 徐祖耀. 应力作用下的相变[J]. 热处理, 2004(2): 1 ? 17
Xu Zuyao. Phase transition under stress[J]. Heat Treatment, 2004(2): 1 ? 17
[13] 张勇, 綦秀玲. 随焊冲击旋转挤压控制LD10薄板件焊接变形和热裂纹的研究[J]. 中国机械工程, 2013, 24(13): 1817 ? 1820
Zhang Yong, Qi Xiuling. Control of welding residual deformation and hot crack of LD10 thin plate by welding with impacting rotate on compression[J]. China Mechanical Engineering, 2013, 24(13): 1817 ? 1820
[14] 李立英. ASTM4130钢焊接热影响区组织与性能研究[D]. 北京: 中国石油大学, 2011.
Li Liying. Study on microstructure and properties in heat-affected zone of ASTM4130 steel[D]. Beijing: China University of Petroleum, 2011.
[15] 万响亮, 李光强, 吴开明. 低合金高强钢针状铁素体组织特征和形成机理[J]. 钢铁研究学报, 2016, 28(6): 1 ? 12
Wan Xiangliang, Li Guangqiang, Wu Kaiming. Microstructure characteristics and formation mechanism of acicular ferrite in high-strength low-alloy steels[J]. Journal of Iron and Steel Research, 2016, 28(6): 1 ? 12
[16] 魏世同, 孙健, 刘景武, 等. V含量及回火工艺对高强钢TIG焊熔敷金属组织性能的影响[J]. 焊接学报, 2020, 41(11): 1 ? 6
Wei Shitong, Sun Jian, Liu Jingwu, et al. Effect of V content and tempering treatment on microstructure and mechanical properties of the high strength steel TIG weld metal[J]. Transactions of the China Welding Institution, 2020, 41(11): 1 ? 6
[17] 冯端. 金属物理学(第一卷 结构与缺陷)[M]. 北京: 科学出版社, 2017.
Feng Duan. Physics of metals (volume 1, structure and defects)[M]. Beijing: Science Press, 2017.
