Robotic grippers have been used in industry as end-effectors but are usually limited to operations in pre-defined workspace. However, few devices can capture irregularly shaped dynamic targets in space, underwater and other unstructured environments. In this paper, a novel continuum arm group mechanism inspired by the morphology and motions of sea anemones is proposed. It is able to dissipate and absorb the kinetic energy of a fast moving target in omni-direction and utilize multiple arms to wrap and lock the target without accurate positioning control. Wire-driven actuation systems are implemented in the individual continuum arms, achieving both bending motion and stiffness regulation. Through finite element method, the influence of different configurations of the continuum arm group on the capture performance is analyzed. A robotic prototype is constructed and tested, showing the presented arm group mechanism has high adaptability to capture targets with different sizes, shapes, and incident angles.
Robotic grippers have been used in industry as end-effectors but are usually limited to operations in pre-defined workspace. However, few devices can capture irregularly shaped dynamic targets in space, underwater and other unstructured environments. In this paper, a novel continuum arm group mechanism inspired by the morphology and motions of sea anemones is proposed. It is able to dissipate and absorb the kinetic energy of a fast moving target in omni-direction and utilize multiple arms to wrap and lock the target without accurate positioning control. Wire-driven actuation systems are implemented in the individual continuum arms, achieving both bending motion and stiffness regulation. Through finite element method, the influence of different configurations of the continuum arm group on the capture performance is analyzed. A robotic prototype is constructed and tested, showing the presented arm group mechanism has high adaptability to capture targets with different sizes, shapes, and incident angles.
[1] F V Drigalski, D Yoshioka, W Yamazaki, et al. NAIST openhand M2S: A versatile two-finger gripper adapted for pulling and tucking textile. First IEEE International Conference on Robotic Computing (IRC). IEEE, 2017: 117-122.
[2] F C Samavati, A Feizollahi, P Sabetian, et al. Design, fabrication and control of a three-finger robotic gripper. 2011 First International Conference on Robot, Vision and Signal Processing, IEEE, 2011: 280-283.
[3] K Nie, W Wan, K Harada. A hand combining two simple grippers to pick up and arrange objects for assembly. IEEE Robotics and Automation Letters, 2019, 4(2): 958-965.
[4] M Bolboe, I Staretu. Antropomorphic gripper with two symmetrical fingers, designed for industrial robots. 2014 23rd International Conference on Robotics in Alpe-Adria-Danube Region (RAAD), IEEE, 2014: 1-6.
[5] J Butterfa?, M Grebenstein, H Liu, et al. DLR-Hand II: Next generation of a dextrous robot hand. Proceedings 2001 ICRA IEEE International Conference on Robotics and Automation (Cat. No. 01CH37164), IEEE, 2001, 1: 109-114.
[6] L U Odhner, L P Jentoft, M R Claffee, et al. A compliant, underactuated hand for robust manipulation. The International Journal of Robotics Research, 2014, 33(5): 736-752.
[7] J S Dai, D Wang, L Cui. Orientation and workspace analysis of the multifingered metamorphic hand-metahand. IEEE Transactions on Robotics, 2009, 25(4): 942-947.
[8] K Yoshida, H Nakanishi. Impedance matching in capturing a satellite by a space robot. Proceedings 2003 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2003)(Cat. No. 03CH37453), IEEE, 2003, 4: 3059-3064.
[9] Q Meng, J Liang, O Ma. Identification of all the inertial parameters of a non-cooperative object in orbit. Aerospace Science and Technology, 2019, 91: 571-582.
[10] Y W Li, Y M Bo, G P Zhao. Survey of measurement of position and pose for space non-cooperative target. 2015 34th Chinese Control Conference (CCC), IEEE, Hangzhou, China, 2015: 5101-5106.
[11] I Rekleitis, E Martin, G Rouleau, et al. Autonomous capture of a tumbling satellite. Journal of Field Robotics, 2007, 24(4): 275-296.
[12] O Khatib, X Yeh, G Brantner, et al. Ocean one: A robotic avatar for oceanic discovery. IEEE Robotics & Automation Magazine, 2016, 23(4): 20-29.
[13] M Shan, J Guo, E Gill. Review and comparison of active space debris capturing and removal methods. Progress in Aerospace Sciences, 2016, 80: 18-32.
[14] I D Walker, D M Dawson, T Flash, et al. Continuum robot arms inspired by cephalopods. Unmanned Ground Vehicle Technology VII, 2005, 5804: 303-314.
[15] M W Hannan, I D Walker. The elephant trunk manipulator, design and implementation. 2001 IEEE/ASME International Conference on Advanced Intelligent Mechatronics. Proceedings (Cat. No. 01TH8556), IEEE, 2001, 1: 14-19.
[16] M Wilde, I Walker, S K Choon, et al. Using tentacle robots for capturing non-cooperative space debris-A proof of concept. AIAA SPACE and Astronautics Forum and Exposition, 2017: 5246.
[17] G Zhai, B Liang, C Li. Proximity trajectory planning for net-based space robotic system. Journal of Harbin Institute of Technology, 2010, 42(09): 1356-1362.
[18] G Zhai, Y Qiu, B Liang, et al. On-orbit capture with flexible tether–net system. Acta Astronautica, 2009, 65(5-6): 613-623.
[19] B Mosadegh, P Polygerinos, C Keplinger, et al. Pneumatic networks for soft robotics that actuate rapidly. Advanced Functional Materials, 2014, 24(15): 2163-2170.
[20] F Ilievski, A D Mazzeo, R F Shepherd, et al. Soft robotics for chemists. Angewandte Chemie International Edition, 2011, 50(8): 1890-1895.
[21] K C Galloway, K P Becker, B Phillips, et al. Soft robotic grippers for biological sampling on deep reefs. Soft Robotics, 2016, 3(1): 23-33.
[22] S N Geng, Y Y Wang, L S Chen, et al. Design and control of a continuum arm with variable stiffness. Journal of Astronautics, 2018, 39(12): 1391-1400.
[23] C H Yang, S N Geng, I Walker, et al. Geometric constraint-based modeling and analysis of a novel continuum robot with Shape Memory Alloy initiated variable stiffness. The International Journal of Robotics Research, 2020, 39(14): 1620-1634.
[24] R J Kang, Y Guo, L S Chen, et al. Design of a pneumatic muscle based continuum robot with embedded tendons. IEEE/ASME Transactions on Mechatronics, 2017, 22(2): 751-761.
[25] X Dong, D Palmer, D Axinte, et al. In-situ repair/maintenance with a continuum robotic machine tool in confined space. Journal of Manufacturing Processes, 2019, 38(FEB. ): 313-318.
[26] M F Wang, D Palmer, X Dong, et al. Design and development of a slender dual-structure continuum robot for in-situ aeroengine repair. 2018 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), 2018: 5648-5653.
[27] Y Li. Sea anemone: The sunflower of the deep ocean. China Nature, 2019(4): 12.
[28] Q H Huang. Deflection method for measuring the elastic modulus of a metal cantilever beam. Science and Technology Information, 2011(28): 67.
[29] Y T Zhang, R Ding, Z Y Zuo, et al. A new method for simultaneously measuring the elastic modulus and Poisson's ratio of a cylindrical specimen by the relationship between lateral compression force and displacement. Journal of Experimental Mechanics, 2019(3): 1.
[30] J Cui. Understanding and application of steel structure design code. China Building Industry Press, 2004. (in Chinese)
