|
|
|
| Dynamic Mechanical Behavior and Numerical Simulation of 6013-T4 Aluminum Alloy at Different Temperatures and Strain Rates |
| FENG Qingfeng1, YAO Zaiqi1, YE Tuo2, ZHU Ling1, WANG Zhenhu2, GUO Pengcheng2, LI Luoxing2 |
1. Ningbo Geely Automobile Research Development Co. Ltd., Ningbo 315000, China;
2. State Key Laboratory of Advanced Design and Manufacture for Vehicle Body, Hunan University, Changsha 410082, China |
|
|
|
|
Abstract Dynamic compression test of 6013-T4 aluminum alloy was conducted by split Hopkinson pressure bar apparatus at different temperatures (25, 200, 300℃) and strain rates (1 000, 2 000, 3 000, 4 000, 5 000 s-1), and dynamic mechanical behavior under impact load was investigated. Numerical simulation of dynamic impact experiment was carried out by the fitted Johnson-Cook constitutive equation. The results show that 6013-T4 aluminum alloy had significant strain rate and strain hardening effect, and the dynamic flow stress decreased with increase of deformation temperature. The yield strength at room temperature was insensitivity to strain rate. As deformation temperature increased, the strain rate sensitivity of yield strength gradually increased. Based on the quasi-static at room temperature and dynamic true stress-true strain curves at different temperatures and strain rates, Johnson-Cook constitutive equation of the alloy was determined. The simulated results of true stress-true strain curves at different temperatures and strain rates were consistence with the experimental and constitutive results.
|
|
Received: 09 August 2016
Published: 25 July 2019
|
|
|
|
|
|
| [1] |
KONG Dewu, LÜ Kun, HUANG Qunfeng, TANG Zheng. Numerical Simulation of Microstructure Distribution in Tooth of 42CrMo Steel Gear during Step Quenching[J]. Materials For Mechanical Engineering, 2018, 42(8): 72-77. |
| [2] |
SI Peiqiang, YAN Chongjing, SONG Yan, ZHENG Yongle, LIU Jiangwei. Numerical Simulation of Temperature Field of Friction Plug Welding Area of 7075-T6 Aluminum Alloy[J]. Materials For Mechanical Engineering, 2018, 42(7): 62-66. |
| [3] |
WANG Min, ZHANG Chun, XIAO Haifeng, LI Bing, XI Jiansheng. Numerical Simulation for Female Die Fillet Radius Effect on Hot Forming Fracture Behavior of High Strength Steel Sheet[J]. Materials For Mechanical Engineering, 2017, 41(6): 75-78. |
| [4] |
LIU Guohui, CHE Hongyan, MA Lei, YU Siliang, CAO Rui. Numerical Simulation on Stress Field of Cold Metal Transfer (CMT) Welded Joint Aluminum and Steel Dissimilar Metals[J]. Materials For Mechanical Engineering, 2017, 41(6): 90-94. |
| [5] |
WENG Wen-ping, QU Tian-peng, SHENG Min-qi, JI-fang, ZHOU Wei, WANG Jing. Formation and Controlling of Central-Line Segregation in Magnesium Alloy Cast-Rolled Strip[J]. Materials For Mechanical Engineering, 2017, 41(3): 73-78. |
| [6] |
XU Jun-yan, BU Jian-rong, ZHU Nan. Numerical Simulation of Closed Hot Precision Forging Process Improvement for Gear Blank with Ribbed Plate[J]. Materials For Mechanical Engineering, 2017, 41(3): 103-106. |
|
|
|
|
