Please wait a minute...

机械工程学报  2018, Vol. 54 Issue (11): 2-28    DOI: 10.3901/JME.2018.11.002
  产品装配技术专栏 本期目录 | 过刊浏览 | 高级检索 |
产品装配技术的研究现状、技术内涵及发展趋势
刘检华1, 孙清超2, 程晖3, 刘小康4, 丁晓宇1, 刘少丽1, 熊辉1
1. 北京理工大学机械与车辆学院 北京 100081;
2. 大连理工大学机械工程学院 大连 116024;
3. 西北工业大学机电学院 西安 710072;
4. 重庆理工大学机械检测技术与装备教育部工程研究中心 重庆 400054
The State-of-the-art, Connotation and Developing Trends of the Products Assembly Technology
LIU Jianhua1, SUN Qingchao2, CHENG Hui3, LIU Xiaokang4, DING Xiaoyu1, LIU Shaoli1, XIONG Hui1
1. School of Mechanical Engineering, Beijing Institute of Technology, Beijing 100081;
2. School of Mechanical Engineering, Dalian University of Technology, Dalian 116024;
3. School of Mechanical Engineering, Northwestern Polytechnical University, Xi'an 710072;
4. Engineering Research Center of Mechanical Testing Technology and Equipment, Chongqing University of Technology, Chongqing 400054
全文: PDF(8300 KB)  
输出: BibTeX | EndNote (RIS)      
摘要 当前国内外精密/超精密加工技术的快速发展,使得零部件加工精度和一致性得到显著提高,装配环节对产品性能的保障作用正日益凸显,相关研究越来越得到国内外学者的关注。针对目前我国产品装配技术研究相对滞后,缺乏相关研究体系的现状,在总结国内外产品装配技术的研究现状基础上,阐述了其分类和内涵,建立了产品装配技术的研究体系框架,并对其面向装配的设计、装配工艺设计与仿真、装配工艺装备、装配测量与检测、装配车间管理等主要研究方向进行了论述,最后指出了未来产品装配技术的集成化、精密化、微/纳化和智能化的发展趋势。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
刘检华
孙清超
程晖
刘小康
丁晓宇
刘少丽
熊辉
关键词 集成装配精密装配微/纳装配智能装配面向装配的设计装配工艺设计装配工艺装备装配测量装配车间管理建模与仿真    
Abstract:With the rapid development of precision and ultra-precision machining technology at home and abroad, precision and consistency of machined parts have been improved prominently. Hence, the assembly process is playing a more and more important role in assuring the performance of assembled products, and the related research is gaining widespread attention. However, domestic research on the products assembly technology is relatively lagging and lacks a comprehensive research system. Based on the state-of-the-art of the products assembly technology, its classification and connotation is elaborated, and a comprehensive research framework of the products assembly technology is established. Based thereon, the basic research contents of the framework are discussed, including design for assembly, assembly process design and simulation, assembly process equipment, assembly measurement, assembly workshop management, etc. Finally, the developing trends of the products assembly technology, i.e., integration, precision, micro-nano, intelligence, are pointed out.
Key wordsintegrated assembly    precision assembly    micro/nano assembly    intelligent assembly    design for assembly    assembly process design    assembly technological equipment    assembly measurement    assembly workshop management    modeling and simulation
收稿日期: 2018-01-19      出版日期: 2018-07-17
ZTFLH:  TG156  
基金资助:国家自然科学基金(51675050,51605030)和国防基础科研(JCKY2016204A502,JCKY2016203B106,JCKY2016204B201,JCKY2017204B502)资助项目。
通讯作者: 刘检华(通信作者),男,1977年出生,博士,教授,博士研究生导师。主要研究方向为产品装配与检测技术。E-mail:jeffliu@bit.edu.cn   
作者简介: 孙清超,男,1979年出生,博士,副教授,硕士研究生导师。主要研究方向为高性能紧固技术。E-mail:qingchao@dlut.edu.cn;程晖,男,1984年出生,博士,副教授,硕士研究生导师。主要研究方向为先进装配与连接技术。E-mail:chenghui@nwpu.edu.cn;刘小康,男,1978年出生,博士,教授,博士研究生导师。主要研究方向为微纳机械传感理论与技术。E-mail:lxk@cqut.edu.cn;丁晓宇,男,1984年出生,博士,副教授,硕士研究生导师。主要研究方向为精密装配技术。E-mail:xiaoyu.ding@bit.edu.cn;刘少丽,女,1984年出生,博士,讲师,硕士研究生导师。主要研究方向为数字化检测技术。E-mail:liushaoli@bit.edu.cn;熊辉,男,1974年出生,博士,副教授,硕士研究生导师。主要研究方向为装配MES技术。E-mail:xionghui@bit.edu.cn
引用本文:   
刘检华, 孙清超, 程晖, 刘小康, 丁晓宇, 刘少丽, 熊辉. 产品装配技术的研究现状、技术内涵及发展趋势[J]. 机械工程学报, 2018, 54(11): 2-28.
LIU Jianhua, SUN Qingchao, CHENG Hui, LIU Xiaokang, DING Xiaoyu, LIU Shaoli, XIONG Hui. The State-of-the-art, Connotation and Developing Trends of the Products Assembly Technology. Journal of Mechanical Engineering, 2018, 54(11): 2-28.
链接本文:  
http://qikan.cmes.org/jxgcxb/CN/10.3901/JME.2018.11.002      或      http://qikan.cmes.org/jxgcxb/CN/Y2018/V54/I11/2
[1] 张铁,李旻. 互换性与测量技术[M]. 北京:清华大学出版社, 2010. ZHANG Tie, LI Min. Interchangeability and measuring technology[M]. Beijing:Tsinghua University Press, 2010.
[2] 孙刚,万毕乐,刘检华,等. 基于三维模型的卫星装配工艺设计与应用技术[J]. 计算机集成制造系统, 2011, 17(11):2343-2350. SUN Gang, WAN Bile, LIU Jianhua, et al. Secondary planet assembly process design and applied technology based on 3D model[J]. Computer Integrated Manufacturing Systems, 2011, 17(11):2343-2350.
[3] WHITNEY D E. Mechanical assemblies:Their design, manufacture, and role in product development[M]. New York:Oxford University Press, 2004.
[4] 国家自然科学基金委员会工程与材料科学部. 学科发展战略研究报告(2011-2020):机械工程学科发展战略报告[M]. 北京:科学出版社, 2010. Ministry of engineering and materials science of the National Natural Science Foundation of China. Research report on the strategy of discipline development (2011-2020):Strategic report on the development of mechanical engineering discipline[M]. Beijing:Science Press, 2010.
[5] BOOTHROYD G, ALTING L. Design for assembly and disassembly[C]. Annals of the CIRP, 1992, 41(2):652-636.
[6] 姜华,熊光楞,曾庆良. 面向装配的设计方法与技术研究[J]. 计算机集成制造系统, 1998, 5(4):56-60. JIANG Hua, XIONG Guangleng, ZENG Qingliang. Research on design method and technology for assembly[J]. Computer Integrated Manufacturing Systems, 1998, 5(4):56-60.
[7] 顾寄南, 蔡健敏. 产品可装配性评价技术的研究现状和发展方向[J]. 机械设计, 2003, 20(12):1-3. GU Jinan, CAI Jianmin. Research status and development direction of product assemblability evaluation technology[J]. Journal of Machine Design, 2003, 20(12):1-3.
[8] BOOTHROYD G. Product design for manufacture and assembly[J]. Computer-Aided Design, 1994, 26(7):515-602.
[9] DEFAZIO T L, WHITNEY D E. Simplified generation of all mechanical assembly sequences[J]. IEEE Trans. Robotics and Automation, 1987, 3(6):640-658.
[10] SAEID M, ISLAM A U. Multi-criteria assembly sequencing[J]. Computers and Industrial Engineering, 1997, 32(4):743-751.
[11] 彭商贤,郭东. 柔性装配系统设计的研究[J]. 中国机械工程, 1996, 7(3):34-38. PENG Shangxian, GUO Dong. Research on the design of flexible assembly system[J]. China Mechanical Engineering, 1996, 7(3):34-38.
[12] 刘检华,宁汝新,万毕乐,等. 面向虚拟装配的复杂产品装配路径规划技术研究[J]. 系统仿真学报, 2007, 19(9):2003-2007. LIU Jianhua, NING Ruxin, WAN Bile, et al. Research of complex product assembly path planning in virtual assembly[J]. Journal of System Simulation, 2007, 19(9):2003-2007.
[13] 刘检华,侯伟伟,张志贤,等. 基于精度和物性的虚拟装配技术[J]. 计算机集成制造系统, 2011, 17(3):595-604. LIU Jianhua, HOU Weiwei, ZHANG Zhixian, et al. Virtual assembly technology based on precision and physical attribute[J]. Computer Integrated Manufacturing Systems, 2011, 17(3):595-604.
[14] SANKAR J, CONNACHER H I, LYONS K W. Virtual assembly using virtual reality techniques[J]. Computer-Aided Design, 1997, 29(8):575-584.
[15] 曾理,张林鍹,肖田元. 一个虚拟装配支持系统的实现[J]. 系统仿真学报, 2002, 14(9):1149-1153. ZENG Li, ZHANG Linxuan, XIAO Tianyuan. Introduction of a virtual assembly supported system[J]. Journal of System Simulation, 2002, 14(9):1149-1153.
[16] 刘振宇,谭建荣,张树有. 基于语义识别的虚拟装配运动引导技术研究[J]. 软件学报, 2002, 13(3):382~389. LIU Zhenyu, TAN Jianrong, ZHANG Shuyou. Research of motion guidance in virtual assembly based on semantics recognition[J]. Journal of Software, 2002, 13(3):382-389.
[17] 刘检华,宁汝新,阎艳. 集成化虚拟装配工艺规划系统研究[J]. 中国机械工程, 2006, 17(23):2486-2491. LIU Jianhua, NING Ruxin, YAN Yan. Study on an integrated virtual assembly process planning system[J]. China Mechanical Engineering, 2006, 17(23):2486-2491.
[18] 武殿梁,杨润党,马登哲,等. 虚拟装配系统及其关键技术[J]. 上海交通大学学报, 2004, 38(9):1539-1543. WU Dianliang, YANG Rundang, MA Dengzhe, et al. Virtual assembly system and the enabling technologies[J]. Journal of Shanghai Jiaotong University, 2004, 38(9):1539-1543.
[19] 王峻峰,付艳,李世其. 分布环境下面向过程的协同预装配活动模型研究[J]. 中国机械工程, 2006, 17(22):2402-2405. WANG Junfeng, FU Yan, LI Shiqi. Research on collaborative process pre-assembly model under distributed environment[J]. China Mechanical Engineering, 2006, 17(22):2402-2405.
[20] 夏平均,姚英学,刘江省,等. 基于虚拟现实和仿生算法的装配序列优化[J]. 机械工程学报, 2007, 43(4):44-52. XIA Pingjun, YAO Yingxue, LIU Jiangsheng, et al. Generation optimized assembly sequence by virtual reality and bionic algorithm[J]. Chinese Journal of Mechanical Engineering, 2007, 43(4):44-52.
[21] 南风强,张友良,汪惠芬,等. 面向精度的数字化产品装配模型研究及应用[J]. 中国机械工程, 2007, 18(9):1071-1075. NAN Fengqiang, ZHANG Youliang, WANG Huifen, et al. Research on precision-oriented digital product assembly model and its applications[J]. China Mechanical Engineering, 2007, 18(9):1071-1075.
[22] 张开富,李原,邵毅,等. 一种集成装配过程信息的装配建模方法[J]. 西北工业大学学报, 2005, 23(2):222-226. ZHANG Kaifu, LI Yuan, SHAO Yi, et al. Including assembly process information in product assembly model for better assembly of product[J]. Journal of Northwestern Polytechnical University, 2005, 23(2):222-226.
[23] 王永, 刘继红. 面向协同装配规划的装配单元规划方法[J]. 机械工程学报, 2009, 45(10):172-179. WANG Yong, LIU Jihong. Assembly unit partitioning for collaborative assembly planning[J]. Journal of Mechanical Engineering, 2009, 45(10):172-179.
[24] EGDALL I M. Manufacture of a three-mirror wide-field optical system[J]. Optical Engineering, 1985, 24(2):285-289.
[25] FIGOSKI J W, SHRODE T E, MOORE G F. Computer-aided alignment of a wide-field three-mirror, unobscured, high-resolution[C]. Proceedings of SPIE-The International Society for Optical Engineering, 1989, 1049:166-177.
[26] SCHMID T, THOMPSON K P, ROLLAND J P. Misalignment-induced nodal aberration fields in two-mirror astronomical telescopes[J]. Applied Optics, 2010, 49(16):D131-D144.
[27] SCHMID T, THOMPSON K P, ROLLAND J P. A unique astigmatic nodal property in misaligned Ritchey-Chrétien telescopes with misalignment coma removed[J]. Optics Express, 2010, 18(5):5282-5288.
[28] 张斌, 韩昌元. 离轴非球面三反射镜光学系统装调中计算机辅助优化方法的研究[J]. 光学学报, 2001, 21(1):54-58. ZHANG Bin, HAN Changyuan. Study on optimization of computer-aided alignment of a three-mirror off-axis aspherical optical system[J]. Acta Optica Sinica, 2001, 21(1):54-58.
[29] 张斌,张晓辉,韩昌元. 光学系统计算机辅助装调中的一种优化算法[J]. 光学精密工程, 2000, 8(3):273-277. ZHANG Bin, ZHANG Xiaohui, HAN Changyuan. Algorithm for misalignmental determination in computeraided alignment of optical system[J]. Optical and Precision Engineering, 2000, 8(3):273-277.
[30] 杨晓飞,张晓辉,韩昌元. Zemax软件在离轴三反射镜系统计算机辅助装调中的应用[J]. 光学精密工程, 2004, 12(3):270-274. YANG Xiaofei, ZHANG Xiaohui, HAN Changyuan. Application of Zemax software in alignment of three-mirror off-axis aspherical optical system[J]. Optical and Precision Engineering, 2004, 12(3):270-274.
[31] 杨晓飞,张晓辉,韩昌元. 用像差逐项优化法装调离轴三反射镜光学系统[J]. 光学学报, 2004, 24(1):115-120. YANG Xiaofei, ZHANG Xiaohui, HAN Changyuan. Alignment of a three-mirror off-axis aspherical optical system by using gradual abberration optimization[J]. Acta Optica Sinica, 2004, 24(1):115-120.
[32] 罗森, 朱永田. 计算机辅助装调方法在离轴卡塞格林系统中的应用[J]. 光学技术, 2008, 34(4):514-517. LUO Sen, ZHU Yongtian. Application of computer-aided alignment of off-axis cassegrain system[J]. Optical Technique, 2008, 34(4):514-517.
[33] 刘剑峰,龙夫年,张伟. 离轴三镜系统计算机辅助装调方法研究[J]. 光学技术, 2004, 30(5):571-576. LIU Jianfeng, LONG Funian, ZHANG Wei. Study on computer-aided alignment method of off-axis three-mirror system[J]. Optical Technique, 2004, 30(5):571-576.
[34] 张伟,刘剑峰,龙夫年. 离轴三镜系统光学元件间补偿关系研究[J]. 光子学报, 2005, 34(8):1160-1164. ZHANG Wei, LIU Jianfeng, LONG Funian. Study on compensation relationships among the elements in off-axis three-mirror system[J]. Acta Photonica Sinica, 2005, 34(8):1160-1164.
[35] 车驰骋,李英才,樊学武,等. 基于矢量波像差理论的计算机辅助装调技术的研究[J]. 光子学报,2008,37(8):1630-1633. CHE Chicheng, LI Yingcai, FAN Xuewu, et al. Research on computer-aided alignment based on vector aberration theory[J]. Acta Photonica Sinica, 2008, 37(8):1630-1633.
[36] 孔小辉, 樊学武. 基于矢量波像差理论的两镜系统装调技术研究[J]. 激光与光电子进展, 2010, 47:0822021-0822027. KONG Xiaohui, FAN Xuewu. Alignment of two-mirror aspherical optical system based on vector aberration theory[J]. Laser & Optoelectronics Progress, 2010, 47:0822021-0822027.
[37] 薛晓光,李国喜,龚京忠,等. 面向装配过程的精密光学系统计算机辅助装调技术[J]. 计算机集成制造系统, 2011, 17(10):2163-2170. XUE Xiaoguang, LI Guoxi, GONG Jingzhong, et al. Assembly process oriented computer aided alignment technology of precision optical system[J]. Computer Integrated Manufacturing Systems, 2011, 17(10):2163-2170.
[38] QIN Q, QI Q, LU W, et al. A review of representation models of tolerance information[J]. International Journal of Advanced Manufacturing Technology, 2017, 3:1-14.
[39] CHEN H, JIN S, LI Z M, et al. A comprehensive study of three dimensional tolerance analysis methods[J]. Computer-Aided Design, 2014, 53(5):1-13.
[40] DESROCHERS A, CLEMENT A. A dimensioning and tolerancing assistance model for CAD-CAM systems[J]. International Journal of Advanced Manufacturing Technology, 1994, 9(6):352-361.
[41] 蒋科,刘检华,宁汝新,等. 基于多色集合理论的几何公差信息推理及其规范性验证[J]. 计算机集成制造系统, 2015, 21(3):593-605. JIANG Ke, LIU Jianhua, NING Ruxin, et al. Reasoning and verifying specifications of geometric tolerances based on polychromatic sets theory[J]. Computer Integrated Manufacturing Systems, 2015, 21(3):593-605.
[42] CLEMENT A, BOURDET P. A study of optimal-criteria identification based on the small displacement screw model[J]. CIRP Annuals-Manufacturing Technology, 1988, 37(1):503-506.
[43] DAVIDSON J K, MUJEZINOVIC A, SHAH J J. A new mathematical model for geometric tolerances as applied to round faces[J]. Journal Mechanical Design, 2002, 124(4):609-622.
[44] 刘玉生,吴昭同,杨将新,等. 基于数学定义的平面尺寸公差数学模型[J]. 机械工程学报, 2001, 37(9):12-17. LIU Yusheng, WU Zhaotong, YANG jiangxin, et al. Mathematical model of size tolerance for plane based on mathematical definition[J]. Chinese Journal of Mechanical Engineering, 2001, 37(9):12-17.
[45] BJORKE O, DEVRIES W R. Computer-Aided tolerancing, second edition[J]. Journal of Manufacturing Science and Engineering, 1991, 113(1):118.
[46] 周江奇,陈关龙,来新民,等. 车身装配尺寸链生成方法[J]. 机械工程学报, 2005, 7(41):164-168. ZHOU Jiangqi, CHEN Guanlong, LAI Xinmin, et al. Generation method of auto-mobile body assembly dimension chain[J]. Chinese Journal of Mechanical Engineering, 2005, 7(41):164-168.
[47] 王恒, 宁汝新, 唐承统. 三维装配尺寸链的自动生成[J]. 机械工程学报, 2005, 6(1):185-191. WANG Heng, NING Ruxin, TANG Chengtong. Automatic generation of 3D assembly dimension chains[J]. Chinese Journal of Mechanical Engineering, 2005, 6(1):185-191.
[48] CLEMENT A, RIVIERE A, SERRE P, et al. The TTRS:13 constraints for dimensioning and tolerancing[J]. Global Consistency of Tolerances, 1998, (4):122-129.
[49] HU J, XIONG G L, WU Z. A variational geometric constraints network for a tolerance types specification[J]. International Journal of Advanced Manufacturing Technology, 2004, 24(3-4):214-222.
[50] JIN J, SHI J. State space modeling of sheet metal assembly for dimensional control[J]. Journal of Manufacturing Science and Engineering, 1999, 121(7):756-762.
[51] 田兆青,来新民,林忠钦. 多工位薄板装配偏差流传递的状态空间模型[J]. 机械工程学报, 2007, 43(2):202-209. TIAN Zhaoqing, LAI Xinmin, LIN Zhongqin. State space model of variations stream propagation in multistation assembly process of sheet metal[J]. Chinese Journal of Mechanical Engineering, 2007, 43(2):202-209.
[52] 洪军,郭俊康,刘志刚,等. 基于状态空间模型的精密机床装配精度预测与调整工艺[J]. 机械工程学报, 2013, 49(6):114-121. HONG Jun, GUO Junkang, LIU Zhigang, et al. Assembly accuracy prediction and adjustment process modeling of precision machine tool based on state space model[J]. Journal of Mechanical Engineering, 2013, 49(6):114-121.
[53] SINGH P K, JAIN P K, JAIN S C. Important issues in tolerance design of mechanical assemblies. Part 2:tolerance synthesis[J]. Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, 2009, 223(10):1249-1287.
[54] 王先逵.机械制造工艺学[M].北京:机械工业出版社, 2014. WANG Xiankui. Manufactural technology of machinery[M]. Beijing:China Machine Press, 2014.
[55] 任水平,刘检华,何永熹,等. 机械产品多质量要求下的选择装配方法[J]. 计算机集成制造系统,2014,20(9):2117-2126. REN Shuiping, LIU Jianhua, HE Yongxi, et al. Selective assembly method for mechanical product with multi-objective assembly function[J]. Computer Integrated Manufacturing Systems, 2014, 20(9):2117-2126.
[56] 朱国权. 螺栓联接质量在整车装配中的分析研究与应用[D]. 上海:上海交通大学, 2011. ZHU Guoquan. Research on the quality of the screw joints in the automobile manufacture[D]. Shanghai:Shanghai Jiao Tong University, 2011.
[57] GB/T16823.2. 螺纹紧固件紧固通则[S]. 北京:国家技术监督局, 1997. GB/T16823.2. General rules of tightening for threaded fasteners[S]. Beijing:State Bureau of Technology Supervision, 1997.
[58] MOTOSH N. Development of design charts for bolts preloaded up to the plastic range[J]. ASME Journal of Engineering for Industry, 1976, 97(1):849-851.
[59] SHIGLEY J E, MISCHKE C R. Mechanical engineering design[M]. New York:McGraw-Hill, 1989.
[60] NASSAR S A, YANG X. Novel formulation of the tightening and breakaway torque components in threaded fasteners[J]. Journal of Pressure Vessel Technology, 2007, 129(9):653-663.
[61] NASSAR S A, BARBER G C, ZOU D. Bearing friction torque in bolted joints[J]. Tribology Transactions, 2005, 48(1):69-75.
[62] NASSAR S A, MATIN P H, BARBER G C. Thread friction torque in bolted joints[J]. Journal of Pressure Vessel Technology, 2005, 127(4):387-393.
[63] YU Q, ZHOU H, WANG L. Finite element analysis of relationship between tightening torque and initial load of bolted connections[J]. Advances in Mechanical Engineering, 2015, 7(5):1-8.
[64] GONG H, LIU J, DING X. Calculation of the effective bearing contact radius for precision tightening of bolted joints[J]. Advances in Mechanical Engineering, 2016, 8(9):1-8.
[65] GANESHMURTHY S, NASSAR S A. Finite element simulation of process control for bolt tightening in joints with nonparallel contact[J]. Journal of Manufacturing Science and Engineering, 2014, 136(2):021018.
[66] 林湖,朱正德,陈强努,等. 螺栓装配技术中扭矩法与转角法比较研究[J]. 汽车工艺与材料, 2003(9):41-44. LIN Hu, ZHU Zhengde, CHEN Qiangnu, et al. Comparison between torque method and angle method in bolt assembly technology[J]. Automobile Technology & Material, 2003(9):41-44.
[67] 黄伟,陈家权. 力矩法、转角法上紧螺栓力矩可靠性分析[J]. 装备制造技术, 2006(4):6-8. HUANG Wei, CHEN Jiaquan. Reliability analysis of moment method and angle method for tightening bolt moment[J]. Equipment Manufacturing Technology, 2006(4):6-8.
[68] 郑友存. 屈服区域转角扭矩法拧紧系统[J]. 柴油机设计与制造, 2009, 16(2):43-47. ZHENG Youcun. Study on yielded torque-angle tightening system[J]. Design and Manufacture of Diesel Engine, 2009, 16(2):43-47.
[69] JUNKER G H. New criteria for self-loosening of fasteners under vibration[J]. SAE Paper No 69005, 1969.
[70] YAMAMOTO A, KASEI S. A solution for self-loosening mechanism of threaded fasteners under transverse vibration[J]. Journal of the Japan Society of Precision Engineering, 1984, 18:262-266.
[71] DAABIN A, CHOW Y M. A theoretical model to study thread loosening[J]. Mechanism and Machine Theory, 1992, 27:69-74.
[72] NASSAR S A, YANG X. A mathematical model for vibration-induced loosening of preload threaded fasteners[J]. Journal of Vibration and Acoustics, 2009, 131:021009.
[73] PAI N G, HESS D P. Experimental study of loosening of threaded fasteners due to dynamic shear loads[J]. Journal of Sound and Vibration, 2002, 253(3):585-602.
[74] PAI N G, HESS D P. Three-dimentional finite element analysis of threaded fastener loosening due to dynamic shear load[J]. Engineering Failure Analysis, 2002, 9:383-402.
[75] IZUMI S, YOKOYAMA T, IWASAKI A, et al. Three-dimensional finite element analysis of tightening and loosening mechanism of threaded fastener[J]. Engineering Failure Analysis, 2005, 12:604-615.
[76] DINGER G, FRIEDRICH C. Avoiding self-loosening failure of bolted joints with numerical assessment of local contact state[J]. Engineering Failure Analysis, 2011, 18:2188-2200.
[77] SASE N, NISHIOKA K, KOGA S, et al. An anti-loosening screw-fastener innovation and its evaluation[J]. Journal of Materials Processing Technology, 1998, 77:209-215.
[78] SASE N, FUJⅡ H. Optimizing study of SLBs for higher anti-loosening performance[J]. Journal of Materials Processing Technology, 2001, 119:174-179.
[79] RANJAN B S C, VIKRANTH H, GHOSAL A N. A novel prevailing torque threaded fastener and its analysis[J]. Journal of Mechanical Design, 2013, 135:101007.
[80] 杨广雪,谢基龙,谢云叶. 基于有限元的一种新型螺母的防松机理研究[J]. 工程力学, 2010, 27(12):224-243. YANG Guangxue, XIE Jilong, XIE Yunye. Study on mechanism of anti-loosening of a new type of nut based on FEM[J]. Engineering Mechanics, 2010, 27(12):224-243.
[81] KEBIR H, ROELANDT J M, CHAMBON L. Dual boundary element method modelling of aircraft structural joints with multiple site damage[J]. Engineering Fractures Mechanics, 2006, 73:418-434.
[82] WRONICZ W, KANIOWSKI J. Experimental and numerical study of strain progress during and after riveting process for brazier rivet and rivet with compensator-squeezing force and rivet type effect[J]. Fatigue of Aircraft Structures, 2011, (1):166-190.
[83] SHISHKIN S S. Computation of the contact load in a rivet bond[J]. Journal of Machinery Manufacture and Reliability, 2010, 39(1):43-46.
[84] 夏平,唐应时,吴安如. 铆钉铆接装配应力的分析和计算[J]. 机械, 2003, 30(4):44-45. XIA Ping, TANG Yingshi, WU Anru. Prestressed analsys and calculation on rivets in riveted structure[J]. Machinery, 2003, 30(4):44-45.
[85] ATRE A P, JOHNSON W S. Analysis of the effects of interference and sealant on riveted lap joints[J]. Journal of Aircraft, 2007, 44(2):353-364.
[86] WRONICZ W, KANIOWSKI J, KORZENIEWSKI B, et al. Experimental and numerical study of stress and strain field around the rivet[C]. ICAF 2011 Structural Integrity:Influence of Efficiency and Green Imperatives, 2010:277-288.
[87] WITEK L. Numerical simulation of riveting process using blind rivet[J]. Aviation, 2006, 10(2):7-12.
[88] XIONG Y, BEDAIR O K. Analytical and finite element modeling of riveted lap joints in aircraft structure[J]. Aiaa Journal, 2012, 37(1):93-99.
[89] ABDELAL G F, GEORGIOU G, COOPER J, et al. Numerical and experimental investigation of aircraft panel deformations during riveting process[J]. Journal of Manufacturing Science & Engineering, 2014, 137(1):54-75.
[90] SZOLWINSKI M P, FARRIS T N. Linking riveting process parameters to the fatigue performance of riveted aircraft structures[J]. Journal of Aircraft, 2000, 37(1):130-137.
[91] LI G, SHI G, BELLINGER N. Effects of clearance fit and friction coefficient on triple-row riveted lap joints[C]. American Institute of Aeronautics and Astronautics, 2010(3025):1-24.
[1] 张秋爽, 金鑫, 张忠清, 张之敬, 尚可. 基于曲面约束匹配算法的装配仿真定位方法[J]. 机械工程学报, 2018, 54(11): 70-76.
[2] 吴伟, 尚建忠, 罗自荣, 曹玉君, 于乃辉. 面向弧形框架式导引头伺服机构的摩擦力矩测量系统及精密装配工艺[J]. 机械工程学报, 2018, 54(11): 77-84.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
京ICP备05060958号 中国机械工程学会版权所有,未经同意请勿转载
中国机械工程学会/北京市海淀区首体南路9号主语国际4号楼11层,邮编100048
0