Please wait a minute...

机械工程学报  2018, Vol. 54 Issue (1): 1-9    DOI: 10.3901/JME.2018.01.001
  本期目录 | 过刊浏览 | 高级检索 |
TBM刀盘地质适应性设计方法及其应用
程永亮1,2, 钟掘1, 暨智勇1,2, 梅勇兵1,2
1. 中南大学机电工程学院 长沙 410083;
2. 中国铁建重工集团有限公司 长沙 410100
Geological Adaptaive Design Method and Application of TBM Cutterhead
CHENG Yongliang1,2, ZHONG Jue1, JI Zhiyong1,2, MEI Yongbing1,2
1. College of Mechanical and Electrical, Central South University, Changsha 410083;
2. China Railway Construction Heavy Industry Co., Changsha 410100
全文: PDF(0 KB)  
输出: BibTeX | EndNote (RIS)      
摘要 刀盘是全断面硬岩掘进机(TBM)的核心部件,其结构的地质适应性是决定TBM掘进效率的关键因素。根据TBM刀盘制造企业设计的实际需要,制定了刀盘设计基本流程,结合掘进地质条件、刀盘结构参数和掘进参数,建立了刀具布置、开口、盘体设计等关键参数计算模型,提出相应的TBM刀盘地质适应性设计方法。将TBM刀盘设计方法应用于某供水工程,对该工程所用TBM的刀具布置参数、刀盘驱动性能与掘进参数以及刀盘结构参数进行地质适应性设计,并对设计方案进行了力学性能和出渣性能仿真分析。研究结果表明,刀盘设计方法能有效实现刀盘结构、刀具布置以及相关掘进参数地质适应性设计,所设计的刀盘力学性能满足施工要求。目前该刀盘在引水工程中累计已掘进12 km,工作状态良好。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
CHENG Yongliang
ZHONG Jue
JI Zhiyong
MEI Yongbing
关键词 刀盘结构设计地质适应性工程应用    
Abstract:The cutterhead is the core component of the full-face rock tunnel boring machine (TBM). The geologic adaptability of the structure is the key factor in determining the TBM efficiency. The basic process of cutterhead design is formulated based on the actual needs of designing cutterhead in TBM manufacturing enterprises. The key parameters calculation models of cutter layout, opening, and cutterhead body design are established by combining geology parameters, cutterhead structure parameters and tunneling parameters. The TBM cutterhead design method is applied to some water supply project. The parameters of TBM cutter layout, the driving performance of the cutterhead, tunneling parameters and cutterhead structure parameters are designed geology-adaptively. The performance of the design program is simulated and analyzed. The research results show that the cutterhead design method can effectively achieve that the cutterhead structure, the cutter layout and the relevant tunneling parameters are designed geology-adaptively. The mechanical properties of the cutterhead is designed to meet the construction requirements. At present the cutterhead has tunnelled 12 km in the water supply project and work well.
Key wordscutterhead    structral design    geological adaptability    engineering application
收稿日期: 2017-03-02      出版日期: 2018-03-09
ZTFLH:  U455  
基金资助:国家重点基础研究发展计划(973计划,2013CB035401)、国家高技术研究发展计划(863计划,2012AA041801)和国家自然科学基金(51475478)资助项目。
通讯作者: 程永亮(通信作者),男,1978年出生,博士研究生。主要研究方向为大型掘进装备设计方法及理论。E-mail:yongliangcheng@163.com   
作者简介: 钟倔,女,1936年出生,博士,教授,博士研究生导师,中国工程院院士。主要研究方向为大型材料制造装备、复杂机电系统设计与技术集成。E-mail:jzhong@csu.edu.cn
引用本文:   
CHENG Yongliang, ZHONG Jue, JI Zhiyong, MEI Yongbing. TBM刀盘地质适应性设计方法及其应用[J]. 机械工程学报, 2018, 54(1): 1-9.
程永亮, 钟掘, 暨智勇, 梅勇兵. Geological Adaptaive Design Method and Application of TBM Cutterhead. Journal of Mechanical Engineering, 2018, 54(1): 1-9.
链接本文:  
http://qikan.cmes.org/jxgcxb/CN/10.3901/JME.2018.01.001      或      http://qikan.cmes.org/jxgcxb/CN/Y2018/V54/I1/1
[1] ROSTAMI J. Hard rock TBM cutterhead modeling for design and performance prediction[J]. Geomechanics and Tunnelling,2008,21(1):18-28.
[2] ZHAO J,GONG Q M,EISENSTEN Z. Tunnelling through a frequently changing and mixed ground:A case history in Singapore[J]. Tunnelling and Underground Space Technology,2007,22(4):388-400.
[3] XIA Yimin,OUYANG Tao,ZHANG Xinming,et al. Mechanical model of breaking rock and force characteristic of disc cutter[J]. Journal of Central South University,2012,19(7):1846-1852.
[4] XIA Yimin,TANG Lu,JI Zhiyong,et al. Optimal design of structural parameters for shield cutterhead based on fuzzy mathematics and multi-objective genetic algorithm[J]. Journal of Central South University,2015,22(3):937-945.
[5] ACAROGLU O,OZDEMIR L,ASBURY B. A fuzzy logic model to predict specific energy requirement for TBM performance prediction[J]. Tunneling Underground Space Technology,2008,23(5):600-608.
[6] GONG Q M,ZHAO J,HEFNY A M. Numerical simulation of rock fragmentation process induced by two TBM cutters and cutter spacing optimization[J]. Tunnelling and Underground Space Technology,2006,21(3):263.
[7] 林赉贶,郭金成,夏毅敏,等. 全断面岩石掘进机边缘滚刀优化布置研究[J]. 现代隧道技术,2016,53(4):90-96. LIN Laikuang,GUO Jincheng,XIA Yimin,et al. Layout optimization of TBM gauge disc cutters[J]. Modern Tunelling Technology,2016,53(4):90-96.
[8] 刘志杰,史彦军,滕弘飞. 基于实例推理的全断面岩石隧道掘进机刀盘主参数设计方法[J]. 机械工程学报,2010,46(3):158-164. LIU Zhijie,SHI Yanjun,TENG Hongfei. Case-based reasoning approach for cutterhead principal parameter design of full face rock tunnel boring machine[J]. Journal of Mechanical Engineering,2010,46(3):158-164.
[9] 耿麒,魏正英,杜军,等. 基于灰关联分析的全断面岩石掘进机滚刀布局优化方法[J]. 机械工程学报,2014,50(21):45-53. GENG Qi,WEI Zhengying,DU Jun,et al. Cutter's layout optimization method of the full-face rock tunnel boring machine based on grey relational analysis[J]. Journal of Mechanical Engineering,2014,50(21):45-53.
[10] 苏鹏程,王宛山,霍军周,等. TBM的滚刀布置优化设计研究[J]. 东北大学学报,2010,31(6):877-881. SU Pengcheng,WANG Wanshan,HUO Junzhou,et al. Optimal layout design of cutters on tunnel boring machine[J]. Journal of Northeastern University,2010,31(6):877-881.
[11] 韩美东,蔡宗熙,曲传咏. 基于动力稳定性的全断面岩石隧道掘进机刀盘临界推进速度研究[J]. 机械工程学报,2014,50(21):10-16. HAN Meidong,CAI Zongxi,QU Chuanyong. Study on the critical driving speed of the tunnel boring machine cutterhead based on the dynamic stability[J]. Journal of Mechanical Engineering,2014,50(21):10-16.
[12] LIU Jianqin,REN Jiabao,GUO Wei. Thrust and torque characteristics based on a new cutter-head load model[J]. Chinese Journal of Mechanical Engineering,2015,28(04):1.
[13] 蒲毅,刘建琴,郭伟,等. 土压平衡盾构机刀盘刀具布置方法研究[J]. 机械工程学报,2011,47(15):161-168. PU Yi,LIU Jianqin,GUO Wei,et al. Research on cutting tool layout method of earth pressure balance shield[J]. Journal of Mechanical Engineering,2011,47(15):161-168.
[14] 郭伟,胡竟,王磊,等. 基于CFD的土压平衡盾构刀盘开口分布特征研究[J]. 机械工程学报,2012,48(17):144-151. GUO Wei,HU Jing,WANG Lei,et al. Study on the opening distribution characteristics of earth pressure balance shield cutter head based on CFD[J]. Journal of Mechanical Engineering,2012,48(17):144-151.
[15] 霍军周,杨静,孙伟,等. TBM刀盘支撑筋结构设计及静动态特性分析[J]. 哈尔滨工程大学学报,2014(7):883-888. HUO Junzhou,YANG Jing,SUN Wei,et al. Structure design and static/dynamic analysis of TBM cutterhead supporting ribs[J]. Journal of Harbin Engineering University,2014(7):883-888.
[16] 霍军周,史彦军,滕弘飞,等. 全断面岩石掘进机刀具布置设计方法[J]. 中国机械工程,2008,19(15):1832-1836. HUO Junzhou,SHI Yanjun,TENG Hongfei,et al. Cutter lay-out design of the full-face rock tunnel boring machine(TBM)[J]. China Mechanical Engineering,2008,19(15):1832-1836.
[17] 霍军周,孙伟,欧阳湘宇,等. 隧道掘进机刀群与盘体支撑筋耦合布置设计[J]. 机械工程学报,2014,50(21):23-30. HUO Junzhou,SUN Wei,OUYANG Xiangyu,et al. Coupling layout design of disc cutters group and cutterhead supporting structure[J]. Journal of Mechanical Engineering,2014,50(21):23-30.
[18] HUO J,SUN W,CHEN J,et al. Disc cutters plane layout design of the full-face rock tunnel boring machine (TBM) based on different layout patterns[J]. Computers & Industrial Engineering,2011,61(4):1209-1225.
[19] ROSTAMI J. Design optimization,performance prediction and economic analysis of tunnel boring machines for the construction of proposed Yucca Mountain nuclear waste repository[D]. Colorado:Colorado School of Mines,1992.
[20] 王梦恕,李典璜,张镜剑,等. 岩石隧道掘进机(TBM)施工及工程实例[M]. 北京:中国铁道出版社,2004. WANG Mengshu,LI Dianhuang,ZHANG Jingjian,et al. Tunnel boring machine construction and engineering case[M]. Beijing:China Railway Publishing House,2004.
[1] SUN Wei, MA Honghui, DING Xin, WANG Lintao. TBM刀盘驱动系统分层次建模及动力学特性研究[J]. 机械工程学报, 2018, 54(1): 44-55.
[2] SUN Wei, ZHU Ye, HUO Junzhou, HUANG Xiaoqi. 基于裂纹失效区域划分的TBM刀盘裂纹位置预估及分析[J]. 机械工程学报, 2018, 54(1): 27-35.
[3] CUI Yuguo, WANG Zibin, MA Jianqiang, ZHENG Junhui, WU Liangen. 四自由度压电微夹钳的设计[J]. 机械工程学报, 2017, 53(23): 165-173.
[4] ZHANG Kai, SONG Jinchun, LI Song, SHI Jia. 基于分类学习粒子群优化算法的液压矫直机控制[J]. 机械工程学报, 2017, 53(18): 202-208.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
京ICP备05060958号 中国机械工程学会版权所有,未经同意请勿转载
中国机械工程学会/北京市海淀区首体南路9号主语国际4号楼11层,邮编100048
0